回到顶部

3.15A USB Type-C Autonomous Charger with JEITA for 1-Cell Li-ion/LiFePO4 Batteries

Autonomous USB Type-C Charger with JEITA

产品详情

主要特征

Parametric specs for Battery Chargers
Charging VIN (V) (max) 14
Max. ICHG (A) 3.15
Cell Chemistry Li-Ion
Li-Polymer
LiFePO4
# Lithium Ion Cells 1
Protected VIN (V) (max) 16
Charger (V) 3.6
3.7
4.2
4.35
4.5
4.3
4.4
Oper. Temp. (°C) -40 to +85
Package/Pins FC2QFN/24
Budgetary
Price (See Notes)
1.47
Parametric specs for USB Charger Detectors
Protocol BC1.2
USB Type-C
VSUPPLY (Single) (V) (min) 4.7
VSUPPLY (Single) (V) (max) 14
VSIGNAL (V) (min) 0
Supported USB Battery Charging Specification BC1.2
USB Type-C
ESD Protection +/-2kV HBM
Package/Pins FC2QFN/24
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Battery Chargers
Charging VIN (V) (max) 14
Max. ICHG (A) 3.15
Cell Chemistry Li-Ion
Li-Polymer
LiFePO4
# Lithium Ion Cells 1
Protected VIN (V) (max) 16
Charger (V) 3.6
3.7
4.2
4.35
4.5
4.3
4.4
Oper. Temp. (°C) -40 to +85
Package/Pins FC2QFN/24
Budgetary
Price (See Notes)
1.47
Parametric specs for USB Charger Detectors
Protocol BC1.2
USB Type-C
VSUPPLY (Single) (V) (min) 4.7
VSUPPLY (Single) (V) (max) 14
VSIGNAL (V) (min) 0
Supported USB Battery Charging Specification BC1.2
USB Type-C
ESD Protection +/-2kV HBM
Package/Pins FC2QFN/24

主要特征

  • Up to 16V Protection
  • 13.7V Maximum Input Operating Voltage
  • 3.15A Maximum Charging Current
  • 6A Discharge Current Protection
    • No Firmware or Communication Required
    • Integrated CC Detection for USB Type-C
    • Integrated BC1.2 Detection for Legacy SDP, DCP, CDP, and DCD Timeout
    • Integrated USB Detection for Common Proprietary Charger Types
    • Automatic Input Current Limit Configuration
    • Input Voltage Regulation with Adaptive Input Current Limit (AICL)
  • Reverse Boost Capability up to 5.1V, 1.5A
  • Termination Voltage
    • 4.1V to 4.5V for Li-ion and Li-poly Batteries
    • 3.6V/3.7V for LiFePO4 Battery
  • Safety
    • Charge Safety Timer
    • JEITA Compliance with NTC Thermistor (MAX77757J)
    • HOT/COLD Stop Charging with NTC Thermistor (MAX77757H)
    • Thermal Shutdown
  • Pin Control of All Functions
    • Resistor Configurable Fast-Charge Current
    • ENBST Pin to Enable and Disable Reverse Boost
    • STAT Pin to Indicate Charging Status
    • INOKB Pin to Indicate Input Power-OK
    • THM Pin to Disable Charge
  • Integrated Power Path
  • Integrated Battery True-Disconnect FET
  • 3mm x 3mm, 24-Lead FC2QFN Package

应用/用途

  • 移动支付销售终端(mPOS)
  • 便携式医疗设备
  • 无线耳机
  • GPS跟踪器
  • 可穿戴设备充电座
  • 移动电源
  • 移动路由器

描述

The MAX77757 is a standalone 3.15A charger with integrated USB Type-C®CC detection with JEITA compliance that supports reverse boost capability. The fast-charge current is easily configured with resistors. The MAX77757 operates with an input voltage of 4.5V to 13.7V and has a maximum input current limit of 3A. The IC also implements the adaptive input current limit (AICL) function that regulates the input voltage by reducing input current to prevent the voltage of a weak adapter from collapsing or folding back.

The USB Type-C Configuration Channel (CC) detection pins on the MAX77757 enable automatic USB Type-C power source detection and input current limit configuration. To support a variety of legacy USB types as well as proprietary adapters, the IC also integrates BC1.2 detection using the D+ and D- pins. The IC runs the CC pin and BC1.2 detection automatically as soon as a USB plug is inserted without any software control.

The IC also offers reverse-boost capability up to 5.1V and 1.5A, which can be enabled with the ENBST pin. The STAT pin indicates charging status while the INOKB pin indicates valid input voltage. Charging can be stopped by pulling the THM pin low.

The MAX77757 is equipped with a Smart Power Selector™ and a battery true-disconnect FET to control the charging and discharging of the battery or to isolate the battery in case of a fault. The MAX77757 is offered in several variants to support Li-ion batteries with various termination voltages from 4.1V to 4.5V. It also has a 3.6V termination voltage option for LiFePO4 batteries. The IC comes in a 3mm x 3mm, 0.4mm pitch, 24-lead FC2QFN package making it suitable for low-cost PCB assembly.

简化框图

MAX77757: Simplified Block Diagram MAX77757: Simplified Block Diagram Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心