MAX745

开关模式锂离子电池充电器

精度高达±0.75%的Li+电池充电器,提供4A充电电流时不会出现发热现象


点击查看特定型号的库存状况。

说明

The MAX745 provides all functions necessary for charging lithium-ion (Li+) battery packs. It provides a regulated charging current of up to 4A without getting hot, and a regulated voltage with only ±0.75% total error at the battery terminals. It uses low-cost, 1% resistors to set the output voltage, and a low-cost N-channel MOSFET as the power switch.

The MAX745 regulates the voltage set point and charging current using two loops that work together to transition smoothly between voltage and current regulation. The per-cell battery voltage regulation limit is set between 4V and 4.4V using standard 1% resistors, and then the number of cells is set from 1 to 4 by pin-strapping. Total output voltage error is less than ±0.75%.

For a similar device with an SMBus™ microcontroller interface and the ability to charge NiCd and NiMH cells, refer to the MAX1647 and MAX1648. For a low-cost Li+ charger using a linear-regulator control scheme, refer to the MAX846A.
MAX745:典型工作电路 MAX745:典型工作电路 放大+

关键特性

  • Charges 1 to 4 Li+ Battery Cells
  • ±0.75% Voltage-Regulation Accuracy Using 1% Resistors
  • Provides up to 4A without Excessive Heating
  • 90% Efficient
  • Uses Low-Cost Set Resistors and N-Channel Switch
  • Up to 24V Input
  • Up to 18V Maximum Battery Voltage
  • 300kHz Pulse-Width Modulated (PWM) Operation
    • Low-Noise, Small Components
  • Stand-Alone Operation—No Microcontroller Needed

应用

  • 蜂窝电话
  • 台式摇篮架充电器
  • 手持式仪表(PDA、掌上电脑)
  • Li+电池组
  • 笔记本电脑
Part NumberLithium Ion CellsProtected VIN
(V)
Charging VIN
(V)
Charge Rate Set byMax. ICHG
(A)
Charge TerminationCharge RegulationOper. Temp.
(°C)
Package/PinsBudgetary
Price
maxmaxSee Notes
MAX745 
1
2
3
4
2424Resistor4
Current Limit
Max. Voltage
Switchmode-40 to +85
SSOP/20
$5.31 @1k
查看所有Battery Chargers (74)
Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。


MAX745EVKIT: MAX745评估板
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料