回到顶部

4.5V to 60V, Synchronous Step-Down Li-Ion Battery Charger Controller

Wide Input Voltage, High-Efficiency, Switching Super Cap Battery Charger

产品详情

主要特征

Parametric specs for Battery Chargers
Charging VIN (V) (max) 60
Max. ICHG (A) 1-20
Cell Chemistry Li-Ion
Li-Polymer
LiFePO4
# Lithium Ion Cells 2
3
4
5
6
Protected VIN (V) (max) 60
Charger (V) 1.25 to 56
Oper. Temp. (°C) -40 to +125
Package/Pins TQFN-CU/24
Budgetary
Price (See Notes)
2.39
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Battery Chargers
Charging VIN (V) (max) 60
Max. ICHG (A) 1-20
Cell Chemistry Li-Ion
Li-Polymer
LiFePO4
# Lithium Ion Cells 2
3
4
5
6
Protected VIN (V) (max) 60
Charger (V) 1.25 to 56
Oper. Temp. (°C) -40 to +125
Package/Pins TQFN-CU/24
Budgetary
Price (See Notes)
2.39

主要特征

  • Optimized Feature-Set for Li-Ion Batteries Including Li-Polymer, LiFePO4 and Li-Titanate
    • ±4% Charging Current Regulation Accuracy
    • ±6% Charging Current Monitor Accuracy (ISMON) ,
    • ±1% Voltage Regulation Accuracy
    • Programmable Constant Current (CC) Mode Charging Current (ILIM)
    • Charge Termination on Full Battery Detection with Taper Current Threshold and Taper Timer
    • Wide 4.5V to 60V Input-Voltage Range
    • Adjustable Output-Voltage Range from 1.25V up to (VDCIN - 2.1V)
    • 125kHz to 2.2MHz Adjustable Frequency with External Clock Synchronization (RT/SYNC)
  • Reliable Operation in Adverse Environmental Conditions
    • Input Short-Circuit Protection (GATEN)
    • Safety Timer Feature (TMR)
    • Deeply Discharged Battery Detection and Preconditioning (DDTH)
    • Battery Temperature Sensing and Charge when Within Temperature of Range (TEMP)
    • Cycle-by-Cycle Overcurrent Limit
    • Programmable EN/UVLO Threshold
    • Status Output Monitoring Using Open-Drain Outputs (FLG1 and FLG2)
    • Overtemperature Protection
    • Complies with CISPR 32 (EN55032) Class B Conducted and Radiated Emissions
    • Wide -40°C to +125°C Ambient Operating Temperature Range/ -40°C to +150°C Junction Temperature Range

应用/用途

  • Battery Backup for Lighting, Security Cameras, and Control Panels
  • Building and Home-Automation Backup Power
  • Industrial Battery Charging and Energy Storage
  • Portable Industrial and Medical Equipment
  • Power Tools and Handheld Terminals

描述

The Himalaya series of voltage regulator ICs, power modules, and chargers enable cooler, smaller, and simpler power supply solutions. The MAX17703 is a high-efficiency, high-voltage, synchronous, step-down, Himalaya Li-ion battery-charger controller designed to operate over an input-voltage range of a 4.5V to 60V. The MAX17703 operates over a wide -40°C to +125°C temperature range and offers a complete charging solution for Li-ion batteries with a ±4% accurate constant current. The output voltage is programmable from 1.25V up to (VDCIN - 2.1V) with ±1% regulation accuracy.

The device uses an external nMOSFET to provide input supply-side short-circuit protection, preventing battery discharge.

The device charges the battery in constant current (CC) and constant voltage (CV) states and terminates in a top-up-charge state after the taper timer is elapsed. The device resumes charging automatically when the battery voltage falls below the recharge voltage threshold. Detection and preconditioning of deeply discharged batteries are enabled by a deep discharge detection comparator.

The MAX17703 is available in a 24-pin 4mm x 4mm TQFN package with an exposed pad.

简化框图

MAX17703: Simplified Application Circuit MAX17703: Simplified Application Circuit Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心