回到顶部

4.5V to 60V, Synchronous Step-Down Lead-Acid Battery Charger Controller

Wide Input Voltage, High-Efficiency, Switching Super Cap Battery Charger

产品详情

主要特征

Parametric specs for Battery Chargers
Charging VIN (V) (max) 60
Max. ICHG (A) 1-20
Cell Chemistry Lead Acid
# NiMH/ NiCd Cells 1
2
Protected VIN (V) (max) 60
Charger (V) 1.25 to 56
Oper. Temp. (°C) -40 to +125
Package/Pins TQFN-CU/24
Budgetary
Price (See Notes)
2.39
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Battery Chargers
Charging VIN (V) (max) 60
Max. ICHG (A) 1-20
Cell Chemistry Lead Acid
# NiMH/ NiCd Cells 1
2
Protected VIN (V) (max) 60
Charger (V) 1.25 to 56
Oper. Temp. (°C) -40 to +125
Package/Pins TQFN-CU/24
Budgetary
Price (See Notes)
2.39

主要特征

  • Optimized Feature-Set for Pb-Acid Batteries
    • ±4% Charging Current Regulation Accuracy
    • ±6% Charging Current Monitor Accuracy (ISMON)
    • ±1% Voltage Regulation Accuracy
    • Programmable Constant Current (CC) Mode Charging Current (ILIM)
    • Full-Battery Detection with Taper Current Threshold and Absorption CV Timer (TMR)
    • Wide 4.5V to 60V Input-Voltage Range
    • Adjustable Output-Voltage Range from 1.25V up to (VDCIN - 2.1V)
    • 125kHz to 2.2MHz Adjustable Frequency with External Clock Synchronization (RT/SYNC)
  • Reliable Operation in Adverse Environmental Conditions
    • Input Short-Circuit Protection (GATEN)
    • Deeply Discharged Battery Detection and Preconditioning (DDTH)
    • Battery Temperature Sensing and Charge when Within Temperature of Range (TEMP)
    • Output Voltage Temperature Compensation
    • Cycle-by-Cycle Overcurrent Limit
    • Programmable EN/UVLO Threshold
    • Status Output Monitoring Using Open-Drain Outputs (FLG1 and FLG2)
    • Overtemperature Protection
    • Wide -40°C to +125°C Ambient Operating Temperature Range/ -40°C to +150°C Junction Temperature Range

应用/用途

  • Battery Backup for Lighting, Security Cameras, and Control Panels
  • Building and Home-Automation Backup Power
  • Industrial Battery Charging and Energy Storage
  • Portable Industrial Equipment
  • Power Tools

描述

The Himalaya series of voltage regulator ICs, power modules, and chargers enable cooler, smaller, and simpler power supply solutions. The MAX17702 is a high-efficiency, high-voltage, synchronous, step-down, Himalaya lead-acid (Pb-acid) battery charger controller designed to operate over an input-voltage range of 4.5V to 60V. The MAX17702 operates over a wide -40°C to +125°C temperature range and offers a complete charging solution for Pb-acid batteries with a ±4% accurate constant-current regulation. The output voltage is programmable from 1.25V up to (VDCIN - 2.1V) with ±1% regulation accuracy.

The device uses an external nMOSFET to provide input supply-side short-circuit protection, preventing battery discharge.

The device charges the battery in constant current (CC), absorption constant voltage (CV) states and enters floating CV state after detecting taper current threshold or absorption CV timer timeout in Absorption CV state. Detection and preconditioning of deeply discharged batteries are enabled by a deep discharge detection comparator.

he MAX17702 is available in a 24-pin 4mm x 4mm TQFN package with an exposed pad.

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心