回到顶部
MyMaxim 订阅
主要特征
- Built-In Synchronous Rectifier
- 0.88V Guaranteed Start-Up
- Ultra-Small µMAX Package: 1.1mm High
- 83% Efficiency
- 4µA Quiescent Supply Current into BATT Pin
- 2µA Logic-Controlled Shutdown (MAX1642)
- Two Undervoltage Detectors (MAX1643)
- 2V to 5.2V Output Range
- 20mA Output Current at 1.2V Input
- Reverse Battery Protection
应用/用途
- 寻呼机
- 个人医疗监视器
- 指针设备
- 远端控制
- 单节电池供电设备
描述
The MAX1642/MAX1643 are high-efficiency, low-voltage, step-up DC-DC converters intended for devices powered by a single alkaline cell. They feature low quiescent supply currents and are supplied in the ultra-small µMAX® package, which is only 1.1mm high. The guaranteed start-up voltage is 0.88V.
Each device consists of an internal 1Ω, N-channel MOSFET power switch; a built-in synchronous rectifier that acts as the catch diode; an oscillator; a reference; and pulse-frequency-modulation (PFM) control circuitry. Both devices feature an independent undervoltage comparator (PFI/PFO). The MAX1642 also includes a 2µA logic-controlled shutdown mode. The MAX1643 offers a dedicated low-battery detector (BATTLO) in lieu of shutdown.
The output voltage for each device is preset to 3.3V ±4%, or can be adjusted from +2V to +5.2V using only two resistors.
Each device consists of an internal 1Ω, N-channel MOSFET power switch; a built-in synchronous rectifier that acts as the catch diode; an oscillator; a reference; and pulse-frequency-modulation (PFM) control circuitry. Both devices feature an independent undervoltage comparator (PFI/PFO). The MAX1642 also includes a 2µA logic-controlled shutdown mode. The MAX1643 offers a dedicated low-battery detector (BATTLO) in lieu of shutdown.
The output voltage for each device is preset to 3.3V ±4%, or can be adjusted from +2V to +5.2V using only two resistors.
Technical Docs
| 数据资料 | 高效率、升压型DC-DC转换器、输入可低至1V | Jul 01, 1997 |
询价申请