回到顶部

产品详情

The MAX77958 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB) that demonstrates the MAX77958 Standalone USB Type-C and Power Delivery Controller.

The EV kit enables easy evaluation of the following features:

  • USB Type-C Detection/PD Communication (See Table 1 for Acronyms)
    • Power Role (Sink and Source), Data Role (UFP and DFP) detection
    • PD Adapter Detection and PD Communication
    • Integrated VCONN Switch with OCP
    • Power/Data Role Swap
    • PPS (with PD Adapter Supporting PPS)
    • Audio and Debug Accessory Sink/Source Mode
    • Vendor Defined Message
  • BC1.2 Legacy Charger Detection: SDP, CDP, DCP and DCD Timeout
  • I2C Master to Control Companion IC.
  • 9 Configurable GPIOs

The EV kit contains a MAX77962 charger to demonstrate the I2C master feature of the MAX77958. The MAX77962 is a buck-boost charger for 2S Li+ battery application and is capable of 3.5V to 23V input voltage, with a maximum programmable fast charging current of 3.2A.

The MAX16904 a buck converter is installed on the EV kit to provide 5V to VCONN pin. The MAX77958 uses GPIO2 to enable the buck converter when the MAX77958 is in SOURCE Power Role.

A Micro-B USB cable is included in the package to serve as the interface from a USB port on a Windows® PC to the slave I2C port on the MAX77958. A Windows based software provides a user-friendly interface to exercise the features of the MAX77958.

主要特征

  • High Voltage VBUS Range
  • Short to VBUS Protection on CC Pins
  • Type-C Support and USB-PD Support
    • Mode configuration: DFP/UFP/DRP
    • Type-C rev1.3 and PD3.0 Compatible
    • Cable Orientation and Power Role Detection
    • Integrated VCONN Switch with OCP
    • Support Try.Snk State
    • Support Audio
    • Support Debug Accessory Sink/Source Mode
    • FRS (Fast Role Swap) Initial Sink Support
    • PPS (Programmable Power Supply) Sink Support
  • Support BC1.2 Legacy/Proprietary Charger Detection
    • Integrated D+/D- Switches
  • MTP Memory for Storing Custom Configuration
  • Moisture Detection and Corrosion Prevention
  • Customization Script
  • I2C Programmable Configuration
  • I2C Master to Control External Charger or DC-DC Converter IC
  • 9 Configurable GPIOs (GPIO6 for SID)
    • External SuperSpeed Mux/Detection/IRQ
    • EN/DISABLE External Power or FETs
  • On-Board I2C Interface
  • Windows 10 Compatible
  • Proven PCB Layout
  • Fully Assembled and Tested

    应用/用途

    简化框图

    MAX77958EVKIT-2S3: Board Photo MAX77958EVKIT-2S3: Board Photo Zoom icon

    技术文档

    数据资料 Evaluation Kit for the MAX77958/MAX77962 Jul 21, 2020

    设计与质量

    单击下面的标题以查看详情页面

    /cn/design/design-tools/ee-sim.html?

    支持和培训

    在Maxim的知识库中搜索您所需的答案。

    过滤搜索

    Maxim专业的应用工程师团队也可以为您解答技术问题,请 访问Maxim的 支持中心

    参量

    主要特征

    • High Voltage VBUS Range
    • Short to VBUS Protection on CC Pins
    • Type-C Support and USB-PD Support
      • Mode configuration: DFP/UFP/DRP
      • Type-C rev1.3 and PD3.0 Compatible
      • Cable Orientation and Power Role Detection
      • Integrated VCONN Switch with OCP
      • Support Try.Snk State
      • Support Audio
      • Support Debug Accessory Sink/Source Mode
      • FRS (Fast Role Swap) Initial Sink Support
      • PPS (Programmable Power Supply) Sink Support
    • Support BC1.2 Legacy/Proprietary Charger Detection
      • Integrated D+/D- Switches
    • MTP Memory for Storing Custom Configuration
    • Moisture Detection and Corrosion Prevention
    • Customization Script
    • I2C Programmable Configuration
    • I2C Master to Control External Charger or DC-DC Converter IC
    • 9 Configurable GPIOs (GPIO6 for SID)
      • External SuperSpeed Mux/Detection/IRQ
      • EN/DISABLE External Power or FETs
    • On-Board I2C Interface
    • Windows 10 Compatible
    • Proven PCB Layout
    • Fully Assembled and Tested

      应用/用途

      描述

      The MAX77958 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB) that demonstrates the MAX77958 Standalone USB Type-C and Power Delivery Controller.

      The EV kit enables easy evaluation of the following features:

      • USB Type-C Detection/PD Communication (See Table 1 for Acronyms)
        • Power Role (Sink and Source), Data Role (UFP and DFP) detection
        • PD Adapter Detection and PD Communication
        • Integrated VCONN Switch with OCP
        • Power/Data Role Swap
        • PPS (with PD Adapter Supporting PPS)
        • Audio and Debug Accessory Sink/Source Mode
        • Vendor Defined Message
      • BC1.2 Legacy Charger Detection: SDP, CDP, DCP and DCD Timeout
      • I2C Master to Control Companion IC.
      • 9 Configurable GPIOs

      The EV kit contains a MAX77962 charger to demonstrate the I2C master feature of the MAX77958. The MAX77962 is a buck-boost charger for 2S Li+ battery application and is capable of 3.5V to 23V input voltage, with a maximum programmable fast charging current of 3.2A.

      The MAX16904 a buck converter is installed on the EV kit to provide 5V to VCONN pin. The MAX77958 uses GPIO2 to enable the buck converter when the MAX77958 is in SOURCE Power Role.

      A Micro-B USB cable is included in the package to serve as the interface from a USB port on a Windows® PC to the slave I2C port on the MAX77958. A Windows based software provides a user-friendly interface to exercise the features of the MAX77958.

      简化框图

      MAX77958EVKIT-2S3: Board Photo MAX77958EVKIT-2S3: Board Photo Zoom icon

      技术文档

      数据资料 Evaluation Kit for the MAX77958/MAX77962 Jul 21, 2020

      支持和培训

      在Maxim的知识库中搜索您所需的答案。

      过滤搜索

      Maxim专业的应用工程师团队也可以为您解答技术问题,请 访问Maxim的 支持中心