MAX25431

Automotive 40V, 2.2MHz, H-Bridge Buck-Boost Controller

Industry's Lowest IQ Buck-Boost Controller with Best in Class Transient Response


点击查看特定型号的库存状况。

说明

The MAX25431 is a current-mode buck-boost controller. The device operates with input voltages from 6V to 36V. The switching frequency is resistor programmable from 220kHz to 2.2MHz and can be synchronized to an external clock..

The device output voltage is available as 5V fixed or adjustable from 4V to 25V. The wide input voltage range, along with its ability to maintain constant output voltage during battery transients, makes the device ideal for automotive applications. In light load applications, a logic input (FSYNC) allows the devices to operate in fixed-frequency, forced-PWM mode to eliminate frequency variaion and help minimize EMI. Protection features include cycle-by-cycle current limit followed by hiccup during sustained overloads, input under-voltage lockout (UVLO), out- put overvoltage protection and thermal shut- down with automatic recovery.

The MAX25431 is available in a small 4mm x 4mm 24-pin TQFN-EP SW package.

MAX25431: Typical Application Circuit MAX25431: Typical Application Circuit 放大+

关键特性

  • Meets Stringent Automotive Quality and Reliability Requirements
    • Operating VIN Range: 2V to 36V Allows Operation in Cold-Crank Conditions
    • Tolerates Input Transients to 40V
    • EN Pin Compatible from +3.3V to +40V
    • -40°C to +125°C Automotive Temperature Range
    • AEC-Q100 Qualified
  • Efficient Solution in a Small Solutions Size
    • Fixed 5V Output Voltage and Adjustable 3V to 25V
    • High Switching Frequency Allows Use of Small External Components
    • Small 4mm x 4mm 24-Pin SWTQFN Package
  • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements
    • 10µA (max) Quiescent Current in Shutdown
  • EMI Mitigation to meet CISPR25 Class 5 Requirements
    • 220kHz to 2.2MHz Operating Frequency
    • Fixed-Frequency PWM Mode
    • External Frequency Synchronization or SYNC OUT Capability

应用

  • null
  • null
  • null

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX25431EVKIT: Evaluation Kit for the MAX25431
申请可靠性报告: MAX25431 
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料


MAX25430
Automotive 100W USB-PD Buck-Boost Port Controller and Protector

  • USB-PD PHY That is TCPCI Standard for Use with Any Low-Cost I2C Master Such as Hub IC, MCU or SOC (MAX25430B)
    • Ground-Offset-Adjusted BMC PHY for Maximum Signal-to-Noise Ratio
  • Non-TCPC Versions Available for Protecting External USB-PD Controller (MAX25430A)
  • Integrated Buck-Boost Controller for External H-bridge
    • 4.5V to 36V Input Operating Range
    • Fixed PDO 5V, 9V, 15V, and 20V up to 5.0A
    • 220kHz, 300kHz, or 400kHz Switching Frequency

  • MAX25400
    Automotive Hi-Speed USB 2.0 Protector

    • Targeted Features for Optimized USB Performance
    • Robust for the Automotive Environment
    • Standards

    MAX25431
    Automotive 40V, 2.2MHz, H-Bridge Buck-Boost Controller

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Efficient Solution in a Small Solutions Size
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

    MAX20459
    Automotive High-Current Step-Down Converter with USB-C Dedicated Charging Port

    • One-Chip Type-C Solution Directly from Car Battery to Portable Device
    • Optimal USB Charging and Communication for Portable Devices
    • Low-Noise Features Prevent Interference with AM Band and Portable Devices

    MAX77958
    Standalone USB Type-C and USB Power Delivery Controller

    • Customizable Firmware
    • USB Type-C Support and USB-PD Support
    • Supports BC1.2 Legacy/Proprietary Charger Detection