MAX20459

Automotive High-Current Step-Down Converter with USB-C Dedicated Charging Port

Industry's Highest Integrated Automotive USB Type-C Charge Enumerator with Buck Converter


点击查看特定型号的库存状况。

说明

The MAX20459 combines a 3A high-efficiency, automo- tive-grade, step-down converter, a USB Type-C DFP con- troller, and automatic BC1.2 DCP, Apple®, and Samsung® dedicated charger-detection circuitry. The device also includes a USB load current-sense amplifier and configurable feedback-adjustment circuit designed to provide automatic USB voltage compensation. The device limits the USB load current using both a fixed internal peak-cur- rent threshold and a user-configurable external current- sense USB load threshold.

The MAX20459 is optimized for high-frequency operation and includes programmable frequency selection from 310kHz to 2.2MHz, allowing optimization of efficiency, noise, and board space based on application require- ments. The fully synchronous DC-DC converter integrates high-side and low-side MOSFETs along with an external SYNC input/output, and can be configured for spread- spectrum operation. Additionally, thermal foldback is im- plemented to avoid excessive heating of the module while charging at high ambient temperature.

TThe MAX20459 allows flexible configuration and ad- vanced diagnostic options for both standalone and super- vised applications. The device can operate as a true one- chip solution that offers advanced fault autorecovery and can be programmed using external programming resistors and/or internal I2C registers.

The MAX20459 is available in a small 5mm x 5mm 32-pin TQFN package and is designed to minimize required ex- ternal components and layout area..

MAX20459: Typical Application Circuits MAX20459: Typical Application Circuits 放大+

关键特性

  • One-Chip Type-C Solution Directly from Car Battery to Portable Device
    • USB Type-C-Compliant DFP Controller
    • Integrated iPhone®/iPad®, Samsung® and BC1.2 DCP Charger Detection
    • 4.5V to 28V Input (40V Load Dump), Synchronous Buck Converter
    • 5V to 7V, 3A Output Capability
    • Standalone Device or I2C Configuration Options and Fault Autorecovery
  • Optimal USB Charging and Communication for Portable Devices
    • User-Programmable Voltage Gain Adjusts Output for up to 474mΩ Cable Resistance
    • User-Programmable USB Current Limit
  • Low-Noise Features Prevent Interference with AM Band and Portable Devices
    • Fixed-Frequency 310kHz to 2.2MHz Operation
    • Fixed-PWM Option at No Load
    • Spread Spectrum for EMI Reduction
    • SYNC Input/Output for Frequency Parking
  • Robust Design Keeps Vehicle System and Portable Device Safe in an Automotive Environment
    • Short-to-Battery Protection on VBUS, HVD± Pins
    • ±15kV Air/±8kV Contact ISO 10605 (330pF, 330Ω)*
    • ±15kV Air/±8kV Contact ISO 10605 (330pF, 2kΩ)*
    • ±15kV Air/±8kV Contact IEC 61000-4-2 (150pF, 330Ω)*
    • Overtemperature Protection, Warning, and Intelligent Current Foldback
    • AEC-Q100 Qualified
    • -40°C to +125°C Operating Temperature Range

应用

  • null
  • 专用USB充电端口(DCP)
  • null

请查看具体的参数规格 USB Host Adapter Emulator (24)


Part NumberSupported Charging ConfigurationsSupported USB Battery Charging SpecificationCharging ModesCurrent Limit Switch ControlCDP EmulationRemote Wake-Up SupportVBUS Reset Time
(sec)
Package/PinsOper. Temp.
(°C)
Budgetary
Price
typSee Notes
MAX20459 NEW!
Apple 1.0A
Apple 2.1A
Apple 2.4A
China YD/T 1591-2009
Samsung Galaxy Tablet 2A
1.2
Auto Detection (Auto-DCP)
Auto Detection with Apple 1A
Auto Detection with Apple 2A
Forced Dedicated Charger
Samsung Galaxy Tablet 2A
Config Resistor or I2CNoYes0.016
TQFN-CU/32
-40 to +125$1.33 @1k

Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。

MAX20459EVKIT: Evaluation Kit for the MAX20459
申请可靠性报告: MAX20459 
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料


MAX25430
Automotive 100W USB-PD Buck-Boost Port Controller and Protector

  • USB-PD PHY That is TCPCI Standard for Use with Any Low-Cost I2C Master Such as Hub IC, MCU or SOC (MAX25430B)
    • Ground-Offset-Adjusted BMC PHY for Maximum Signal-to-Noise Ratio
  • Non-TCPC Versions Available for Protecting External USB-PD Controller (MAX25430A)
  • Integrated Buck-Boost Controller for External H-bridge
    • 4.5V to 36V Input Operating Range
    • Fixed PDO 5V, 9V, 15V, and 20V up to 5.0A
    • 220kHz, 300kHz, or 400kHz Switching Frequency

  • MAX25400
    Automotive Hi-Speed USB 2.0 Protector

    • Targeted Features for Optimized USB Performance
    • Robust for the Automotive Environment
    • Standards

    MAX20459
    Automotive High-Current Step-Down Converter with USB-C Dedicated Charging Port

    • One-Chip Type-C Solution Directly from Car Battery to Portable Device
    • Optimal USB Charging and Communication for Portable Devices
    • Low-Noise Features Prevent Interference with AM Band and Portable Devices

    MAX77958
    Standalone USB Type-C and USB Power Delivery Controller

    • Customizable Firmware
    • USB Type-C Support and USB-PD Support
    • Supports BC1.2 Legacy/Proprietary Charger Detection