Automotive Hi-Speed USB 2.0 Protectors

Industry-Leading Overvoltage and ESD Protection for Automotive USB



The MAX20042F, MAX20043F, and MAX20044F devices provide high ESD and short-circuit protection for the low-voltage internal USB data and USB power line in automotive radio, navigation, connectivity, and USB hub applications. The devices support USB Hi-Speed (480Mbps), USB full-speed (12Mbps), and USB low-speed (1.5Mbps) operation, as well as USB on-the-go (OTG) functionality.

The short-circuit protection features include short-to-battery on the protected HVBUS, HVD+, and HVD- outputs, as well as short-to-HVBUS on the protected HVD+ and HVD- outputs. The devices are capable of a short-to-battery condition of up to +18V. Short-to-GND protection and overcurrent protection are also provided on the protected HVBUS output to protect the internal BUS power rail from an overcurrent fault.

The devices feature high ESD protection to ±15kV Air Gap and ±8kV Contact on the protected HVBUS, HVD+, and HVD- outputs.

The devices feature a low on-resistance (RON), 90mΩ (max) USB power switch, and two low on-resistance (RON), 4Ω (typ) USB 2.0 data switches. These devices also feature an enable input, a fault output, a 10ms fault-recovery time, a 1ms overcurrent blanking time, and an integrated overcurrent autoretry.

The MAX20042F, MAX20043F, and MAX20044F are available in a lead-free, 16-pin QSOP package and operate over the -40°C to +105°C temperature range.
MAX20042F, MAX20043F, MAX20044F: Typical Operating Circuit MAX20042F, MAX20043F, MAX20044F: Typical Operating Circuit 放大+


  • Accurate Bus Current Limiting with Minimal Voltage Drop
    • Low RON 90mΩ (max) USB Power Switch
    • 0.65A (typ), MAX20042F
    • 1.0A (typ), MAX20043F
    • 1.3A (typ), MAX20044F
  • Targeted Features for Optimized USB Performance
    • Two RON 4Ω (typ) USB 2.0 Data Switches
    • 480Mbps or 12Mbps USB 2.0 Operation
    • 10ms Fault-Recovery Time
    • 1ms Overcurrent Blanking Time
    • 5.67V (typ) Fixed HVBUS Protection Trip Threshold
  • Robust for the Automotive Environment
    • Short-to-Battery and Short-to-GND Protection on Protected HVBUS Output
    • Short-to-Battery and Short-to-BUS Protection on Protected HVD+ and HVD- Outputs
    • Tested to ISO 10605 and IEC 61000-4-2 ESD Standards
    • 16-Pin (3.90mm × 4.94mm) QSOP Package
    • -40°C to +105°C Operating Temperature Range
    • AEC-Q100 Qualified


  • 汽车USB保护

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX20044EVKIT: Evaluation Kit for the MAX20042F/MAX20043F/MAX20044F
申请可靠性报告: MAX20042F 
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >



Automotive 100W USB-PD Buck-Boost Port Controller and Protector

  • USB-PD PHY That is TCPCI Standard for Use with Any Low-Cost I2C Master Such as Hub IC, MCU or SOC (MAX25430B)
    • Ground-Offset-Adjusted BMC PHY for Maximum Signal-to-Noise Ratio
  • Non-TCPC Versions Available for Protecting External USB-PD Controller (MAX25430A)
  • Integrated Buck-Boost Controller for External H-bridge
    • 4.5V to 36V Input Operating Range
    • Fixed PDO 5V, 9V, 15V, and 20V up to 5.0A
    • 220kHz, 300kHz, or 400kHz Switching Frequency

  • MAX25400
    Automotive Hi-Speed USB 2.0 Protector

    • Targeted Features for Optimized USB Performance
    • Robust for the Automotive Environment
    • Standards

    Automotive 40V, 2.2MHz, H-Bridge Buck-Boost Controller

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Efficient Solution in a Small Solutions Size
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

    Automotive High-Current Step-Down Converter with USB-C Dedicated Charging Port

    • One-Chip Type-C Solution Directly from Car Battery to Portable Device
    • Optimal USB Charging and Communication for Portable Devices
    • Low-Noise Features Prevent Interference with AM Band and Portable Devices

    Standalone USB Type-C and USB Power Delivery Controller

    • Customizable Firmware
    • USB Type-C Support and USB-PD Support
    • Supports BC1.2 Legacy/Proprietary Charger Detection