MAX-ECG-MONITOR与Android® OS设备配合,显示各个传感器的实时测量数据;平台也捕获来自于健康传感器信号的原始数据并进行储存,从而允许完全访问定制开发用例的结果和汇总。


下载应用 ›



  • 临床级ECG和心率测量及分析,基于MAX30003超低功耗Power ECG AFE,带有HR检测算法
  • 开放API,支持为基于ECG的用例开发独特的设备应用
  • 附加板载传感器,包括加速度计、陀螺仪和磁力计


  • 运动强度检测
  • 内置健身和健康监测的服装
  • 健身监测胸带
  • 医用心率信号贴片


应用笔记 6950 A Customizable ECG Monitor You Can Call Your Own
设计指南 6778 How to Measure Biopotential ECG Using a Chest Strap
用户指南 6732 Maxim ECG Monitor User's Guide



Download the application ›

Quick Start Guide for the MAX-ECG-MONITOR

What You Need

  • Chest strap or adhesive electrodes (both provided)
  • Android® device (e.g., phone, tablet, etc.) with Bluetooth connection for data logging

Power On/Off
The MAX-ECG-MONITOR turns on automatically when it detects a heartbeat through the electrodes. A red LED flashes on the top of the monitor to indicate that it is on.

The monitor automatically powers off when no heartbeat is detected across the electrodes (for example, when the device is not worn).

Wearing the ECG Monitor

  1. Snap the monitor into the chest strap connector.
  2. Moisten the strap electrode areas with water or electrode gel.
  3. Adjust the strap length to fit tightly but comfortably around your chest below the chest muscles with the Maxim logo facing out.
  4. Ensure the moist electrode areas are firmly pressed against your skin
  5. For applications where more secured mounting is desired, use the adhesive electrodes (red) instead of the chest strap. NOTE: Detach the monitor and rinse the chest strap under running water after every use. Dry the strap and electrodes. Sweat and moisture left on the electrodes can keep the device on unnecessarily and reduce battery life.

NOTE: The adhesive electrodes are for single-time use and may be left on the skin up to a few days. More supplies can be ordered from

Movesense® Showcase App
The ECG monitor can be paired with an Android-based device, such as phone or tablet, for viewing and logging data through the Movesense Showcase app for Android.

Installing the App

  1. Save the provided .apk-file to a location that you can access by phone (for example, to the phone's storage if you have a file browser or to Dropbox®).
  2. Open the file, which prompts you to install the Movesense Showcase app. The main screen of the app is shown below.

    Movesense Showcase main screen. Figure 1. Movesense Showcase main screen.

Connecting to an ECG Monitor

  1. To connect the MoveSense app to an ECG monitor, press the Movesense icon in the app—devices available for Bluetooth® connection are then displayed (see figure below).

    ECG monitors available for connection. Figure 2. ECG monitors available for connection.

  2. Click on the appropriate monitor to connect. The connection can take 10 seconds to 30 seconds to establish.

Using the App

Sensor Measurements
After a successful connection, a list appears to show all the measurement applications that are available.

  1. Scroll down the screen to reveal a complete list (see figures below, result split in two images).

    List of sensors. List of sensors.
    Figure 3. List of sensors.

  2. Select the desired measurement application.

    For example, click on the ECG item to bring up the ECG measurement screen (see figure below).

    Inactive ECG measurement application. Figure 4. Inactive ECG measurement application.

  3. Activate the measurement application by sliding the Subscribe button to the right.

    In this example, the button becomes blue and the ECG chart is displayed at the bottom of the screen (see figure below). Data is logged into a file called *_EcgActivityGraphView.csv in the local MoveSense folder.

    Activated ECG measurement application. Figure 5. Activated ECG measurement application.

Other measurements include heart rate, temperature, and motion sensing. Refer to the "Maxim ECG Monitor User's Guide" for a complete description of each available measurement.

The monitor uses a 3V lithium cell battery (CR 2025). Refer to the user's manual for instructions to replace the battery.

Got a Wearable Health Design Idea? Here’s How to Make It Accurate

Summertime Fun Outside the Classroom

型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >



Quad-Channel Industrial Digital Output, Digital Input

  • Per-Channel Configurability Enables Wide Range of Applications 
  • Fault Tolerant with Built-In Diagnostics
  • High Integration Reduces BOM Count and PCB Space