回到顶部
/content/maximintegrated/zh/products/interface/isolation/isolated-gate-driver

隔离型栅极驱动器

类型 编号 PDF 标题

技术文档

*必填

Technical Documentation

技术文档

显示 10 of 返回顶部 100 结果 查看全部 结果

器件号 标题 文件类型 Date

MAXREFDES1165: 32-Channel Industrial Digital I/O Module

The MAXREFDES1165 is a complete, 32-channel industrial digital I/O module comprising 16 digital ...

MAXREFDES179# Reference Design Board

The MAXREFDES179 reference design is a complete Universal Serial Bus (USB) type-C PD solution fe...

MAXREFDES104#: 健康传感器平台3.0版

HSP3 is a unique evaluation and development platform in a wearable form factor that demos the fu...

MAXREFDES177# IO-Link Universal Analog IO

The MAXREFDES177# IO-Link®-compliant, universal analog IO reference design uses the MAX22515 IO-...

MAXREFDESGPS_B: How to Add GPS to your Product without Draining your Battery

Ultra-low power GPS reference design using the MAX2769C GNSS receiver and the MAX32632 Cortex M4...

MAXREFDES103#:健康传感器腕带

The MAXREFDES103# is a full wrist-worn wearable reference design for heart-rate, heart-rate vari...

Wireless Backhaul Power Supplies

The design provides all the power supply rails and power sequencing necessary to power Xilinx® Z...

MAXREFDES69#: Isolated RS-485 Communications Micro PLC card

The MAXREFDES69# reference design is a dual-channel isolated RS-485 data-communication circuit f...

MAXREFDES176#: IO-Link 16-Channel Digital Input Hub

The MAXREFDES176# IO-Link®-compliant, digital input hub reference design uses the MAX22515 IO-Li...

MAXREFDES161#: Frequency Synthesizer Shield

MAXREFDES161# is an Arduino form factor-compatible shield for synthesizing frequencies from 23.5...

MAXREFDES145#: 8-Channel IO-Link Master

The MAXREFDES145# is an IO-Link®-compliant, 8-port IO-Link master reference design that uses TEC...

MAXREFDES1238: Scalable, Single Input, 6 Output, Power Solution for the Versal ACAP Platform

In this design a single 12V input supplies a circuit which outputs 6 separate rails ranging from...

Important Notice for Maxim Integrated Design Information and Resources

Notice of design information and resources for Maxim Integrated products.

超高CMTI隔离型栅极驱动器,拥有最佳传输延迟匹配

隔离型栅极驱动器支持低电压微控制器安全地打开和关断高压功率晶体管。除隔离之外,高速碳化硅(SiC)和氮化镓(GaN)晶体管的安全开关为隔离型栅极驱动器IC提出了额外要求:高共模瞬态抗扰性(CMTI)。Maxim的隔离型栅极驱动器IC具有最高等级的CMTI,300kV/µs (典型值),设计用于提高使用此类晶体管技术的逆变器和电机控制应用的可靠性和效率。

主要特性包括:

  • 数字隔离、基于Maxim专有的工艺技术、长达60秒的3kVRMS耐压,有效提高安全性。
  • 最高传输延迟匹配(5ns,最大值)降低死区时间,从而提高效率。
  • 可调节UVLO允许功率晶体管的工作温度更低,提高可靠性。

产品表


隔离型栅极驱动器产品表

器件 隔离等级
(VRMS)
通道 传输
延迟(ns)
峰值输出
电流(A)
CMTI (典型值)
kV/µs
IC EV Kit
MAX22701E 3000 1 35 5 300 购买 购买

 

回到顶部 |

精选产品


隔离型栅极驱动器精选产品

超高CMTI隔离型栅极驱动器

MAX22701E

具有米勒箝位输出的单端输入

回到顶部 |

开发板


隔离型栅极驱动器开发板

超高CMTI隔离型栅极驱动器评估套件

MAX22701EVKIT

包括两片完全相同的IC,用于测量器件间传输延迟匹配

回到顶部 |

设计资源


隔离型栅极驱动器设计资源

回到顶部 |