MAX9150EVKIT

MAX9150评估板


点击查看特定型号的库存状况。

说明

The MAX9150 evaluation kit (EV kit) is a fully assembled and tested circuit board that simplifies the evaluation of the MAX9150 400Mbps, 10-port low-voltage differential signaling (LVDS) repeater. The MAX9150 accepts an LVDS signal and repeats it on 10 outputs. Output levels are LVDS into a double-terminated bus (100Ω at each end of the differential bus for a total 50Ω load). The EV kit contains two independent circuits, each with a MAX9150 repeater, that can be linked using various media or tested independently. The outputs can be sampled through SMA connectors or category-5 twisted-wire pair. The two circuits on the EV kit require +3.3V power supplies to operate.

关键特性

  • Two Independent Repeater Circuits
  • Link Testing with LVDS Signals
  • Supports Testing of Various Media
    • Coax Cable with SMA Connectors
    • Twisted-Wire Pair
    • PC Board Trace
  • Independent Supplies Allow Common-Mode Testing
  • Low-Voltage, Low-Power Operation
  • Fully Assembled and Tested

应用

  • 上/下路复用器
  • 背板与互连应用
  • 蜂窝电话基站
  • 时钟/数据分配
  • 数字交叉连接
  • 网络路由器和交换机
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料