MAX3341E

±15kV ESD保护、USB收发器,UCSP封装,带有USB检测


点击查看特定型号的库存状况。

说明

The MAX3341E/MAX3342E USB transceivers convert logic-level signals to USB signals, and USB signals to logic-level signals. An internal 1.5k? USB termination resistor supports full-speed (12Mbps) USB operation. The MAX3341E/MAX3342E provide built-in ±15kV ESD-protection circuitry on the USB I/O pins, D+ and D-, and VCC.

The MAX3341E/MAX3342E operate with logic supply voltages as low as 1.8V, ensuring compatibility with low-voltage ASICs. The suspend mode lowers supply current to less than 50µA. A unique enumerate feature allows changes in USB communication protocol while power is applied. The MAX3341E/MAX3342E are fully compliant with USB specification 1.1, and full-speed operation under USB specification 2.0.

The MAX3341E/MAX3342E have a USB detect that monitors the USB bus for insertion and signals this event. The MAX3341E USB_DET threshold is between 3.7V (min) and 4V (max), while the MAX3342E USB_DET threshold is between 1V (min) and 2.8V (max).

The MAX3341E/MAX3342E are available in the miniature 4 5 4 UCSP™, as well as the small 16-pin TSSOP, and are specified over the extended temperature range, -40°C to +85°C.

关键特性

  • ±15kV ESD Protection On D+ and D-
  • Comply with USB Standard 1.1 (Full Speed 2.0)
  • USB Skew Independent of Input Skew
  • Separate VP and VM Inputs/Outputs
  • VL Down to 1.8V Allows Connection with Low-Voltage ASICs
  • Reenumerate with Power Applied
  • USB Detect Function
    3.7V (min) to 4V (max)—MAX3341E
    1V (min) to 2.8V (max)—MAX3342E
  • Allow Single-Ended or Differential Logic I/O
  • Internal Linear Regulator Allows Direct Powering from the USB
  • Internal Termination Resistor for Full-Speed Operation
  • Three-State Outputs
  • No Power-Supply Sequencing Required
  • Driver Active in Suspend Mode
  • Available in Miniature Chip-Scale Package
  • 应用

    • 蜂窝电话
    • 数据托架
    • 数码相机
    • 信息系统
    • MP3播放器
    • PC外设
    • PDA
    产品可靠性报告: MAX3341E.pdf 
    型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

    备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

    质量管理体系 >
    环境管理体系 >

     
    Status:
    Package:
    Temperature:

    相关资料


    MAX25430
    Automotive 100W USB-PD Buck-Boost Port Controller and Protector

  • USB-PD PHY That is TCPCI Standard for Use with Any Low-Cost I2C Master Such as Hub IC, MCU or SOC (MAX25430B)
    • Ground-Offset-Adjusted BMC PHY for Maximum Signal-to-Noise Ratio
  • Non-TCPC Versions Available for Protecting External USB-PD Controller (MAX25430A)
  • Integrated Buck-Boost Controller for External H-bridge
    • 4.5V to 36V Input Operating Range
    • Fixed PDO 5V, 9V, 15V, and 20V up to 5.0A
    • 220kHz, 300kHz, or 400kHz Switching Frequency

  • MAX25400
    Automotive Hi-Speed USB 2.0 Protector

    • Targeted Features for Optimized USB Performance
    • Robust for the Automotive Environment
    • Standards

    MAX25431
    Automotive 40V, 2.2MHz, H-Bridge Buck-Boost Controller

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Efficient Solution in a Small Solutions Size
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

    MAX22517
    Self-Powered, Two-Channel, 3.5kVRMS Digital Isolator

    • Robust Protection in Small Footprint
    • Robust Galvanic Isolation of Digital Signals
    • Design Flexibility

    MAX22518
    Self-Powered, Two-Channel, 3.5kVRMS Digital Isolator

    • Robust Protection in Small Footprint
    • Robust Galvanic Isolation of Digital Signals
    • Design Flexibility

    MAX22519
    Self-Powered, Two-Channel, 3.5kVRMS Digital Isolator

    • Robust Protection in Small Footprint
    • Robust Galvanic Isolation of Digital Signals
    • Design Flexibility

    MAX33072E
    +3V to +5.5V, Polarity Invert RS-485 Half-Duplex Transceiver with ±65V Fault Protection, ±40V CMR, and ±40kV ESD

    • Integrated Protection for Robust Communication
    • High-Performance Transceiver Enables Flexible Designs

    MAX33073E
    +3V to +5.5V, Polarity Invert RS-485 Half-Duplex Transceiver with ±65V Fault Protection, ±40V CMR, and ±40kV ESD

    • Integrated Protection for Robust Communication
    • High-Performance Transceiver Enables Flexible Designs

    MAX20459
    Automotive High-Current Step-Down Converter with USB-C Dedicated Charging Port

    • One-Chip Type-C Solution Directly from Car Battery to Portable Device
    • Optimal USB Charging and Communication for Portable Devices
    • Low-Noise Features Prevent Interference with AM Band and Portable Devices

    MAX77958
    Standalone USB Type-C and USB Power Delivery Controller

    • Customizable Firmware
    • USB Type-C Support and USB-PD Support
    • Supports BC1.2 Legacy/Proprietary Charger Detection

    MAX14906
    Quad-Channel Industrial Digital Output, Digital Input

    • Per-Channel Configurability Enables Wide Range of Applications 
    • Fault Tolerant with Built-In Diagnostics
    • High Integration Reduces BOM Count and PCB Space 

    MAX22088
    Home Bus System (HBS) Compatible Transceiver

    • High Integration Reduces BOM and Footprint
    • Configurability Enables Flexible Design
    • Integrated Protection for Robust Communication

    MAX14829
    Low Power IO-Link Device Transceiver with Dual Drivers

    • Low Power Dissipation Reduces the Thermal Footprint for Small Sensors
    • Configurability and Integration Reduce SKUs
    • Selectable Driver Integrated Protection Enables Robust Communication