DS21S07A

SCSI端接器


点击查看特定型号的库存状况。

说明

The DS21S07A is backward-compatible replacement for the DS2107A providing precision resistance values for SCSI-1, Fast, and Ultra SCSI with 2% tolerance.

Each chip actively terminates cable segments in SCSI systems carrying nine single-ended drivers and receivers. In an 8-bit wide SCSI arrangement, two DS21S07As connected at each end of the SCSI cable can terminate 18 active signal lines. A 16-bit wide SCSI arrangement requires three DS21S07As at each end to terminate 27 active signal lines.

SCSI termination is used wherever data must be transmitted without voltage drops caused by signal reflection at the parallel bus termination point, which is often significant in multidropped systems.

All Dallas terminators feature power-down mode with extremely low-quiescent consumption. Different SCSI terminators are available to match every existing SCSI protocol and to address different design concerns, such as price, board space, and voltage differential.

关键特性

  • Fully compliant with SCSI-1, Fast, and Ultra SCSI standards
  • Backward-compatible with DS2107 and DS2107A
  • Provides active signal termination for 9 lines
  • Handles actively negated SCSI signals
  • Laser-trimmed 110-ohm resistors with 2% tolerance
  • Low drop-out voltage of 3pF
  • Power-down mode with resistors isolated from bus
  • SCSI bus hot plug-compatible
  • Onboard thermal shutdown circuitry
  • Operating range:
    • 0°C to +70°C
    • 4.0V to 5.5V
产品可靠性报告: DS21S07A.pdf 
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料


MAX25430
Automotive 100W USB-PD Buck-Boost Port Controller and Protector

  • USB-PD PHY That is TCPCI Standard for Use with Any Low-Cost I2C Master Such as Hub IC, MCU or SOC (MAX25430B)
    • Ground-Offset-Adjusted BMC PHY for Maximum Signal-to-Noise Ratio
  • Non-TCPC Versions Available for Protecting External USB-PD Controller (MAX25430A)
  • Integrated Buck-Boost Controller for External H-bridge
    • 4.5V to 36V Input Operating Range
    • Fixed PDO 5V, 9V, 15V, and 20V up to 5.0A
    • 220kHz, 300kHz, or 400kHz Switching Frequency

  • MAX25400
    Automotive Hi-Speed USB 2.0 Protector

    • Targeted Features for Optimized USB Performance
    • Robust for the Automotive Environment
    • Standards

    MAX22517
    Self-Powered, Two-Channel, 3.5kVRMS Digital Isolator

    • Robust Protection in Small Footprint
    • Robust Galvanic Isolation of Digital Signals
    • Design Flexibility

    MAX22518
    Self-Powered, Two-Channel, 3.5kVRMS Digital Isolator

    • Robust Protection in Small Footprint
    • Robust Galvanic Isolation of Digital Signals
    • Design Flexibility

    MAX22519
    Self-Powered, Two-Channel, 3.5kVRMS Digital Isolator

    • Robust Protection in Small Footprint
    • Robust Galvanic Isolation of Digital Signals
    • Design Flexibility

    MAX33072E
    +3V to +5.5V, Polarity Invert RS-485 Half-Duplex Transceiver with ±65V Fault Protection, ±40V CMR, and ±40kV ESD

    • Integrated Protection for Robust Communication
    • High-Performance Transceiver Enables Flexible Designs

    MAX33073E
    +3V to +5.5V, Polarity Invert RS-485 Half-Duplex Transceiver with ±65V Fault Protection, ±40V CMR, and ±40kV ESD

    • Integrated Protection for Robust Communication
    • High-Performance Transceiver Enables Flexible Designs

    MAX20459
    Automotive High-Current Step-Down Converter with USB-C Dedicated Charging Port

    • One-Chip Type-C Solution Directly from Car Battery to Portable Device
    • Optimal USB Charging and Communication for Portable Devices
    • Low-Noise Features Prevent Interference with AM Band and Portable Devices

    MAX77958
    Standalone USB Type-C and USB Power Delivery Controller

    • Customizable Firmware
    • USB Type-C Support and USB-PD Support
    • Supports BC1.2 Legacy/Proprietary Charger Detection

    MAX14906
    Quad-Channel Industrial Digital Output, Digital Input

    • Per-Channel Configurability Enables Wide Range of Applications 
    • Fault Tolerant with Built-In Diagnostics
    • High Integration Reduces BOM Count and PCB Space 

    MAX22088
    Home Bus System (HBS) Compatible Transceiver

    • High Integration Reduces BOM and Footprint
    • Configurability Enables Flexible Design
    • Integrated Protection for Robust Communication

    MAX14829
    Low Power IO-Link Device Transceiver with Dual Drivers

    • Low Power Dissipation Reduces the Thermal Footprint for Small Sensors
    • Configurability and Integration Reduce SKUs
    • Selectable Driver Integrated Protection Enables Robust Communication