DS9100A

iButton读取头冲压件

概述

说明

The DS9100 touch and hold probe stampings' function is similar to the DS9098 iButton® retainer. An F5 MicroCan™ will fit completely into the DS9098, but the flange and about one-third of the can will extend out if pressed into the DS9100. As a probe, the DS9100A together with the coiled spring DS9100C allows reading iButtons on contact. With additional pressure, the stiff springs of the DS9100A's outer ring will deflect and grip the MicroCan sufficiently to provide a continuous contact to both the can rim (ground) and the can lid (data). If reading on contact is not required, the cantilever-type center contact DS9100B can be used rather than the DS9100C.

放大+

关键特性

Compact two-piece, all-metal receptacle for F5 MicroCan
Accepts two-thirds of the MicroCan (one-third of MicroCan will extend out)
Allows reading iButtons with either momentary or dwelled contact
Outer ring will hold MicroCan for dwelled contact
Two options for data contact: cantilever (DS9100B) or coiled spring (DS9100C)
>10000 insertion/withdrawal cycles with no performance degradation
Redundancy of contacts and high contact force ensure reliability
Probe withstands high temperatures required for printed circuit board (PCB) solder reflow operations
Material is stainless steel with selective tin lead plating for optimal solderability to PCB
Cleaning fluids drain freely for quick clean up

参数规格

Part Number	Overview

DS9100A	Touch and Hold Probe Stampings A
DS9100B	Touch and Hold Probe Stampings B
DS9100C	Touch and Hold Probe Stampings C
查看所有iButton Readers and Adapters (24)
Pricing Notes: 价格仅供参考，用于同类产品的比较。所提供报价为美元，需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题，请参考：价格与供货网站或与指定代理商联系。