产品详情
The inductor and varactor elements of the tank circuits are integrated on-chip, greatly simplifying application of the part. In addition, the center frequency of oscillation and frequency span are factory preset to provide a guaranteed frequency range versus control voltage. An external tuning voltage controls the oscillation frequency. The output signals are buffered by an amplifier stage (easily matched to 50Ω), using only capacitors to provide higher output power and isolate the devices from load impedance variations.
The MAX2622/MAX2623/MAX2624 operate from a +2.7V to +3.3V supply voltage and require only 9mA of supply current. In shutdown mode, the supply current is reduced to 0.1µA.
主要特征
- Fully Monolithic
- Guaranteed Performance
- On-Chip 50Ω Output Match
- Wide Choice of Frequencies
- 855MHz to 881MHz (MAX2622)
- 885MHz to 950MHz (MAX2623)
- 947MHz to 998MHz (MAX2624)
- +2.7V to +3.3V Single-Supply Operation
- Low-Current Shutdown Mode
- Smaller than Modules (8-pin µMAX package)
应用/用途
- 866MHz至868MHz欧洲ISM波段(MAX2622)
- 902MHz至928MHz ISM波段,±10.7MHz中频(MAX2623)
- 902MHz至928MHz ISM波段,45MHz至70MHz中频(MAX2624)
- DECT 1/2频率LO (MAX2623)
RF Freq. (MHz) (max) | 950 |
RF Freq. (MHz) (min) | 885 |
LO Driver Outputs | No |
PLL Driver Outputs | Yes |
POUT (dBm) (min) | -3 |
POUT (dBm) (max) | -3 |
Package/Pins | UMAX/8 |
Budgetary Price (See Notes) | $3.01 @1k |
技术文档
数据资料 | 单片压控振荡器 | May 26, 2000 | |
设计指南 | RF和混合信号PCB的一般布局指南 | ||
应用笔记 | Alarm Sounds When RF Transmitter is Out of Range | ||
应用笔记 | 3.5GHz无线本地环路收发信机射频芯片 |
单击下面的标题以查看详情页面
描述
The MAX2622/MAX2623/MAX2624 evaluation kits (EV kits) simplify evaluation of the MAX2622/MAX2623/MAX2624 VCOs. These kits enable testing of the devices' RF performance and require no additional support circuitry. The signal output uses an SMA connector to facilitate the connection to RF test equipment.
The MAX2622 EV kit is assembled with the MAX2622 and incorporates output matching components optimized for an RF frequency of 868MHz. The MAX2623 EV kit is assembled with the MAX2623 and incorporates output matching components optimized for an RF frequency of 917MHz. The MAX2624 EV kit is assembled with the MAX2624 and incorporates output matching components optimized for an RF frequency of 973MHz.
特征
- Easy Evaluation of MAX2622/MAX2623/MAX2624
- +2.7V to +3.3V Single-Supply Operation
- RF Output Matched to 50Ω
- All Critical Peripheral Components Included
描述
The MAX2622/MAX2623/MAX2624 evaluation kits (EV kits) simplify evaluation of the MAX2622/MAX2623/MAX2624 VCOs. These kits enable testing of the devices' RF performance and require no additional support circuitry. The signal output uses an SMA connector to facilitate the connection to RF test equipment.
The MAX2622 EV kit is assembled with the MAX2622 and incorporates output matching components optimized for an RF frequency of 868MHz. The MAX2623 EV kit is assembled with the MAX2623 and incorporates output matching components optimized for an RF frequency of 917MHz. The MAX2624 EV kit is assembled with the MAX2624 and incorporates output matching components optimized for an RF frequency of 973MHz.
特征
- Easy Evaluation of MAX2622/MAX2623/MAX2624
- +2.7V to +3.3V Single-Supply Operation
- RF Output Matched to 50Ω
- All Critical Peripheral Components Included
描述
The MAX2622/MAX2623/MAX2624 evaluation kits (EV kits) simplify evaluation of the MAX2622/MAX2623/MAX2624 VCOs. These kits enable testing of the devices' RF performance and require no additional support circuitry. The signal output uses an SMA connector to facilitate the connection to RF test equipment.
The MAX2622 EV kit is assembled with the MAX2622 and incorporates output matching components optimized for an RF frequency of 868MHz. The MAX2623 EV kit is assembled with the MAX2623 and incorporates output matching components optimized for an RF frequency of 917MHz. The MAX2624 EV kit is assembled with the MAX2624 and incorporates output matching components optimized for an RF frequency of 973MHz.
特征
- Easy Evaluation of MAX2622/MAX2623/MAX2624
- +2.7V to +3.3V Single-Supply Operation
- RF Output Matched to 50Ω
- All Critical Peripheral Components Included
参量
RF Freq. (MHz) (max) | 950 |
RF Freq. (MHz) (min) | 885 |
LO Driver Outputs | No |
PLL Driver Outputs | Yes |
POUT (dBm) (min) | -3 |
POUT (dBm) (max) | -3 |
Package/Pins | UMAX/8 |
Budgetary Price (See Notes) | $3.01 @1k |
主要特征
- Fully Monolithic
- Guaranteed Performance
- On-Chip 50Ω Output Match
- Wide Choice of Frequencies
- 855MHz to 881MHz (MAX2622)
- 885MHz to 950MHz (MAX2623)
- 947MHz to 998MHz (MAX2624)
- +2.7V to +3.3V Single-Supply Operation
- Low-Current Shutdown Mode
- Smaller than Modules (8-pin µMAX package)
应用/用途
- 866MHz至868MHz欧洲ISM波段(MAX2622)
- 902MHz至928MHz ISM波段,±10.7MHz中频(MAX2623)
- 902MHz至928MHz ISM波段,45MHz至70MHz中频(MAX2624)
- DECT 1/2频率LO (MAX2623)
描述
The inductor and varactor elements of the tank circuits are integrated on-chip, greatly simplifying application of the part. In addition, the center frequency of oscillation and frequency span are factory preset to provide a guaranteed frequency range versus control voltage. An external tuning voltage controls the oscillation frequency. The output signals are buffered by an amplifier stage (easily matched to 50Ω), using only capacitors to provide higher output power and isolate the devices from load impedance variations.
The MAX2622/MAX2623/MAX2624 operate from a +2.7V to +3.3V supply voltage and require only 9mA of supply current. In shutdown mode, the supply current is reduced to 0.1µA.
技术文档
数据资料 | 单片压控振荡器 | May 26, 2000 | |
设计指南 | RF和混合信号PCB的一般布局指南 | ||
应用笔记 | Alarm Sounds When RF Transmitter is Out of Range | ||
应用笔记 | 3.5GHz无线本地环路收发信机射频芯片 |