›

DS2143Q

E1控制器

概述

说明

The DS2143 is a comprehensive, software-driven E1 framer. It is meant to act as a slave or coprocessor to a microcontroller or microprocessor. Quick access through the parallel control port allows a single micro to handle many E1 lines. The DS2143 is very flexible and can be configured into numerous orientations by software. The software orientation of the device allows the user to modify their design to conform to future E1 specification changes. The controller contains a set of 69 8-bit internal registers that the user can access. These internal registers are used to configure the device and obtain information from the E1 link. The device fully meets all of the latest E1 specifications, including CCITT G.704, G.706, and G.732.

DS2143、DS2143Q：原理框图

放大+

关键特性

E1/ISDN-PRI framing transceiver
Frames to CAS, CCS, and CRC4 formats
Parallel control port
On-board two frame elastic-store slip buffer
Extracts and inserts CAS signaling bits
Programmable output clocks for fractional E1 links, DS0 loopbacks, and drop and insert applications
On-board Sa-data-link support circuitry
FEBE E-bit detection, counting, and generation
Pin-compatible with DS2141A T1 controller
5V supply; low power (50mW) CMOS
Available in 40-pin DIP and 44-pin PLCC (DS2143Q)