回到顶部
产品详情
主要特征
应用/用途
简化框图
Technical Docs
数据资料 | 250MHz、低功耗、高输出电流的差分线驱动器 | Jul 01, 1998 | |
设计指南 | Driving Video Lines |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
主要特征
- 250MHz -3dB Bandwidth (AV = +2V/V)
- 1400V/µs Slew Rate
- 67dB at 10MHz CMR
- 0.01%/0.01º Differential Gain/Phase
- ±6V Differentially into 100Ω Output Drive
- 1mA Shutdown Capability
- 12.5mA Quiescent Supply Current
- Available in 14-Pin Narrow SO Package
应用/用途
- 差分ADC驱动器
- 差分脉冲放大器
- 高速仪表放大器
- 低噪声差分接收器
- 视频双绞线驱动器
描述
The MAX4142 differential line driver combines high-speed performance with fully symmetrical differential inputs and outputs. With an internally set +2V/V closed-loop gain, the MAX4142 is ideal for driving back-terminated cables and transmission lines.
This device utilizes laser-trimmed thin-film resistors and common-mode cancellation circuitry to deliver an outstanding 67dB at 10MHz common-mode rejection (CMR). Using current-feedback techniques, the MAX4142 achieves a 250MHz -3dB (AV = +2V/V) bandwidth, a 70MHz 0.1dB bandwidth, and a 1400V/µs slew rate. Excellent differential gain/phase error and noise specifications make this amplifier an excellent choice for a wide variety of video and RF signal-processing applications.
The MAX4142 operates from ±5V power supplies and requires only 12.5mA of quiescent current. The output stage is capable of driving a 100Ω load to ±6V (differentially) or to ±3V (single-ended). The MAX4142 is available in a space-saving 14-pin SO package. For a pin-compatible, higher speed differential line driver, see the MAX4147 data sheet.
This device utilizes laser-trimmed thin-film resistors and common-mode cancellation circuitry to deliver an outstanding 67dB at 10MHz common-mode rejection (CMR). Using current-feedback techniques, the MAX4142 achieves a 250MHz -3dB (AV = +2V/V) bandwidth, a 70MHz 0.1dB bandwidth, and a 1400V/µs slew rate. Excellent differential gain/phase error and noise specifications make this amplifier an excellent choice for a wide variety of video and RF signal-processing applications.
The MAX4142 operates from ±5V power supplies and requires only 12.5mA of quiescent current. The output stage is capable of driving a 100Ω load to ±6V (differentially) or to ±3V (single-ended). The MAX4142 is available in a space-saving 14-pin SO package. For a pin-compatible, higher speed differential line driver, see the MAX4147 data sheet.
Technical Docs
数据资料 | 250MHz、低功耗、高输出电流的差分线驱动器 | Jul 01, 1998 | |
设计指南 | Driving Video Lines |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。