回到顶部

+5V、串行输入、电压输出、14位DAC

单通道、串行、电压输出DAC,采用SO封装

产品详情

主要特征

Parametric specs for Precision DACs (< 1MHz)
Resolution (bits) 14
# Channels 1
Interface Serial - SPI
Output Type Voltage- Unbuffered
Reference Ext.
INL (±LSB) (max) 1
Supply Range (V) (min) 4.75
Supply Range (V) (max) 5.25
ICC (mA) (max) 1.1
Settling Time (µs) (typ) 1
Package/Pins PDIP/14
SOIC (N)/14
Oper. Temp. (°C) -55 to +125
-40 to +85
0 to +70
Budgetary
Price (See Notes)
11.43
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Precision DACs (&lt; 1MHz)
Resolution (bits) 14
# Channels 1
Interface Serial - SPI
Output Type Voltage- Unbuffered
Reference Ext.
INL (±LSB) (max) 1
Supply Range (V) (min) 4.75
Supply Range (V) (max) 5.25
ICC (mA) (max) 1.1
Settling Time (µs) (typ) 1
Package/Pins PDIP/14
SOIC (N)/14
Oper. Temp. (°C) -55 to +125
-40 to +85
0 to +70
Budgetary
Price (See Notes)
11.43

主要特征

  • Full 14-Bit Performance Without Adjustments
  • +5V Single-Supply Operation
  • Low Power: 1.5mW
  • 1µs Settling Time
  • Unbuffered Voltage Output Directly Drives 60-kilohm Loads
  • SPI/QSPI/MICROWIRE-Compatible Serial Interface
  • Power-On Reset Circuit Clears DAC Output to 0V (unipolar mode)
  • Schmitt-Trigger Inputs for Direct Optocoupler Interface
  • Pin-Compatible 16-Bit Upgrades (MAX541/MAX542)

应用/用途

  • 自动测试设备(ATE)
  • 数据采集
  • 数字增益与失调控制
  • 工业过程控制
  • 仪表

描述

The MAX544/MAX545 are serial-input, voltage-output, 14-bit digital-to-analog converters (DACs) that operate from a single +5V supply. They provide 14-bit performance (±0.5LSB INL and ±0.9LSB DNL) over temperature without any adjustments. The DAC output is unbuffered, resulting in a low supply current of 0.3mA and a low offset error of 0.6mV.

The DAC output range is 0V to VREF. For bipolar operation, matched scaling resistors are provided in the MAX545 for use with an external precision op amp (such as the MAX400), generating a ±VREF output swing. The MAX545 also includes Kelvin-sense connections for the reference and analog ground pins to reduce layout sensitivity. A 16-bit serial word is used to load data into the DAC latch. The 10MHz, 3-wire serial interface is compatible with SPI™/QSPI™/MICROWIRE™, and it also interfaces directly with optocouplers for applications requiring isolation. A power-on reset circuit clears the DAC output to 0V (unipolar mode) when power is initially applied. The MAX544 is available in 8-pin plastic DIP and SO packages. The MAX545 is available in 14-pin plastic DIP and SO packages.

简化框图

MAX544、MAX545:功能原理框图 MAX544、MAX545:功能原理框图 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心