回到顶部

串行、CMOS、12位乘法DAC,8引脚封装

单通道、串行、电流输出DAC,采用SO封装

产品详情

主要特征

Parametric specs for Precision DACs (< 1MHz)
Resolution (bits) 12
# Channels 1
Interface Serial - Other
Output Type Current- Unbuffered
Reference Ext.
INL (±LSB) (max) 1
Supply Range (V) (min) 11.4
Supply Range (V) (max) 15.75
Settling Time (µs) (typ) 0.25
Package/Pins PDIP/8
SOIC (N)/8
SOIC (W)/16
Oper. Temp. (°C) -55 to +125
-40 to +85
0 to +70
Budgetary
Price (See Notes)
7.64
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Precision DACs (&lt; 1MHz)
Resolution (bits) 12
# Channels 1
Interface Serial - Other
Output Type Current- Unbuffered
Reference Ext.
INL (±LSB) (max) 1
Supply Range (V) (min) 11.4
Supply Range (V) (max) 15.75
Settling Time (µs) (typ) 0.25
Package/Pins PDIP/8
SOIC (N)/8
SOIC (W)/16
Oper. Temp. (°C) -55 to +125
-40 to +85
0 to +70
Budgetary
Price (See Notes)
7.64

主要特征

  • 12-Bit Accuracy in 8-Pin MiniDIP or SO
  • Fast 3-Wire Serial Interface
  • Low INL and DNL (±1/2 LSB Max)
  • Gain Accuracy to ±1LSB Max
  • Low Gain Tempco (5ppm/°C Max)
  • Operates with +5V or +15V Supplies
  • TTL/CMOS Compatible
  • ESD Protected

应用/用途

  • µP控制系统
  • 自动校准
  • 数控滤波器
  • 运动控制系统
  • 可编程放大器/衰减器

描述

The MAX543 is a 12-bit, current-output, multiplying digital-to-analog converter (DAC) that comes in space-saving 8-pin DIP and 8- or 16-pin surface-mount SO packages. Its 3-wire serial interface saves additional board space and also results in low power dissipation. When used with microprocessors (µPs) with a serial port, the MAX543 minimizes the digital noise feedthrough from its input pins to its output. The serial port can be used as a dedicated analog bus and kept inactive while the MAX543 is in use. Serial interfacing also reduces the complexity of opto- or transformer-isolated applications.

The MAX543 contains a 12-bit R-2R type DAC, a serial-in parallel-out shift register, a DAC register and control logic. On the rising edge of the clock (CLK) pulse, the serial input (SRI) data is shifted into the MAX543. When all the data is clocked in, it is transferred into the DAC register by taking the active-low LOAD input low. The MAX 543 is specified with a single power supply of either +5V or +15V. With a +5V supply, the digital inputs are TTL and +5V CMOS compatible. High-voltage CMOS compatibility is maintained with a +15V supply. Maxim’s MAX543 uses low-tempco thin-film resistors laser trimmed to ±¼ LSB linearity and better than ±1 LSB gain accuracy. The digital inputs are protected against electrostatic discharge (ESD) damage and can typically withstand over 5,000V of ESD voltages

简化框图

MAX543:功能框图 MAX543:功能框图 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心