回到顶部

+5V、低功耗、8位四路DAC,带有满摆幅输出缓冲器

四通道、串行、电压输出DAC,QSOP封装

产品详情

主要特征

Parametric specs for Precision DACs (< 1MHz)
Resolution (bits) 8
# Channels 4
Interface Serial - SPI
Output Type Voltage- Buffered
Reference Ext.
INL (±LSB) (max) 1
2
Supply Range (V) (min) 4.5
Supply Range (V) (max) 5.5
ICC (mA) (max) 1.5
Settling Time (µs) (typ) 8
Package/Pins PDIP/16
QSOP/16
Oper. Temp. (°C) -55 to +125
-40 to +85
0 to +70
Budgetary
Price (See Notes)
3.17
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Precision DACs (&lt; 1MHz)
Resolution (bits) 8
# Channels 4
Interface Serial - SPI
Output Type Voltage- Buffered
Reference Ext.
INL (±LSB) (max) 1
2
Supply Range (V) (min) 4.5
Supply Range (V) (max) 5.5
ICC (mA) (max) 1.5
Settling Time (µs) (typ) 8
Package/Pins PDIP/16
QSOP/16
Oper. Temp. (°C) -55 to +125
-40 to +85
0 to +70
Budgetary
Price (See Notes)
3.17

主要特征

  • +4.5V to +5.5V Single-Supply Operation
  • Ultra-Low Supply Current:
    • 0.8mA while Operating
    • 2.5µA in Shutdown Mode
  • Ultra-Small 16-Pin QSOP Package
  • Ground to VDD Reference Input Range
  • Output Buffer Amplifiers Swing Rail to Rail
  • 10MHz Serial Interface Compatible with SPI, QSPI (CPOL = CPHA = 0 or CPOL = CPHA = 1), and MICROWIRE
  • Double-Buffered Registers for Synchronous Updating
  • Serial Data Output for Daisy Chaining
  • Power-On Reset Clears Serial Interface and Sets All Registers to Zero
  • Software Shutdown
  • Software-Programmable Logic Output (µC I/O Extender)
  • Asynchronous Hardware Clear Resets All Internal Registers to Zero

应用/用途

  • 数字增益与失调控制
  • 便携式仪表
  • 可编程衰减器
  • 可编程电流源

描述

The MAX534 serial-input, voltage-output, 8-bit quad digital-to-analog converter (DAC) operates from a single +4.5V to +5.5V supply. Internal precision buffers swing rail to rail, and the reference input range includes both ground and the positive rail. The MAX534 features a 2.5µA shutdown mode.

The serial interface is double buffered: a 12-bit input shift register is followed by four 8-bit buffer registers and four 8-bit DAC registers. The 12-bit serial word consists of eight data bits and four control bits (for DAC selection and special programming commands). Both the input and DAC registers can be updated independently or simultaneously with a single software command. Two additional asynchronous control pins, active-low LDAC and active-low CLR, provide simultaneous updating or clearing of the input and DAC registers.

The interface is compatible with SPI™, QSPI™ (CPOL = CPHA = 0 or CPOL = CPHA = 1), and MICROWIRE™. A buffered data output allows daisy chaining of serial devices.

In addition to 16-pin DIP and CERDIP packages, the MAX534 is available in a 16-pin QSOP that occupies the same area as an 8-pin SO.

For operation guaranteed to 2.7V, see the MAX533 data sheet.

简化框图

MAX534:功能框图 MAX534:功能框图 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心