回到顶部

+5V、低功耗、并行输入、电压输出、12位DAC

单通道、并行、电压输出DAC,采用SSOP封装

产品详情

主要特征

Parametric specs for Precision DACs (< 1MHz)
Resolution (bits) 12
# Channels 1
Interface Parallel - Byte Wide
Output Type Voltage- Buffered
Reference Int.
INL (±LSB) (max) 1
Supply Range (V) (max) 5.5
ICC (mA) (max) 0.4
Settling Time (µs) (typ) 25
Package/Pins PDIP/24
SOIC (W)/24
SSOP/24
Oper. Temp. (°C) -40 to +85
0 to +70
Budgetary
Price (See Notes)
5.98
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Precision DACs (&lt; 1MHz)
Resolution (bits) 12
# Channels 1
Interface Parallel - Byte Wide
Output Type Voltage- Buffered
Reference Int.
INL (±LSB) (max) 1
Supply Range (V) (max) 5.5
ICC (mA) (max) 0.4
Settling Time (µs) (typ) 25
Package/Pins PDIP/24
SOIC (W)/24
SSOP/24
Oper. Temp. (°C) -40 to +85
0 to +70
Budgetary
Price (See Notes)
5.98

主要特征

  • Buffered Voltage Output
  • Internal 2.048V Voltage Reference
  • Operates from Single +5V or Dual ±5V Supplies
  • Low Power Consumption:
    • 250µA Operating Current
    • 40µA Shutdown-Mode Current
  • SSOP Package Saves Space
  • Relative Accuracy: ±1/2 LSB Max Over Temperature
  • Guaranteed Monotonic Over Temperature
  • 4-Quadrant Multiplication with No External Components
  • Power-On Reset
  • Double-Buffered Parallel Logic Inputs

应用/用途

  • 数字增益与失调控制
  • 通用产品
  • 工业过程控制

描述

The MAX530 is a low-power, 12-bit, voltage-output digital-to-analog converter (DAC) that uses single +5V or dual ±5V supplies. This device has an on-chip voltage reference plus an output buffer amplifier. Operating current is only 250µA from a single +5V supply, making it ideal for portable and battery-powered applications. In addition, the SSOP (Shrink-Small-Outline-Package) measures only 0.1 square inches, using less board area than an 8-pin DIP. 12-bit resolution is achieved through laser trimming of the DAC, op amp, and reference. No further adjustments are necessary.

Internal gain-setting resistors can be used to define a DAC output voltage range of 0V to +2.048V, 0V to +4.096V, or ±2.048V. Four-quadrant multiplication is possible without the use of external resistors or op amps. The parallel logic inputs are double buffered and are compatible with 4-bit, 8-bit, and 16-bit microprocessors. For DACs with similar features but with a serial data interface, refer to the MAX531/MAX538/MAX539 data sheet.

简化框图

MAX530:功能原理框图 MAX530:功能原理框图 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心