回到顶部
产品详情
主要特征
应用/用途
Parametric specs for High-Speed DACs (≥ 1MHz)
Resolution (bits) | 10 |
# Channels | 2 |
fCLK (Msps) | 40 |
SFDR (dBc) (@ fOUT) | 70 @ 2.2MHz |
THD (dBc) (@ fOUT) | -68 @ 2.2MHz |
DNL (±LSB) | 0.5 |
INL (±LSB) | 0.5 |
PDISS (mW) | 20.7 |
Interface | Parallel |
VSUPPLY (V) | 3 |
Package/Pins | QSOP/28 |
Budgetary Price (See Notes) | 5.7 |
缩小
简化框图
Technical Docs
数据资料 | 双路、10位、40MHz、电流/电压输出DAC,输出交替更新 | Mar 11, 2002 |
参量
Parametric specs for High-Speed DACs (≥ 1MHz)
Resolution (bits) | 10 |
# Channels | 2 |
fCLK (Msps) | 40 |
SFDR (dBc) (@ fOUT) | 70 @ 2.2MHz |
THD (dBc) (@ fOUT) | -68 @ 2.2MHz |
DNL (±LSB) | 0.5 |
INL (±LSB) | 0.5 |
PDISS (mW) | 20.7 |
Interface | Parallel |
VSUPPLY (V) | 3 |
Package/Pins | QSOP/28 |
Budgetary Price (See Notes) | 5.7 |
主要特征
- +2.7V to +3.3V Single-Supply Operation
- Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz
- Fully Differential Outputs for Each DAC
- ±0.5% FSR Gain Mismatch Between DAC Outputs
- Low-Current Standby or Full Shutdown Modes
- Internal +1.2V Low-Noise Bandgap Reference
- Small 28-Pin QSOP Package
应用/用途
- 任意波形发生器(AWG)
- 数字信号处理(DSP)
- 成像
- 信号重建
描述
The MAX5182 is a dual, 10-bit, alternate-phase-update, current-output digital-to-analog converter (DAC) designed for superior performance in systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5185 provides equal specifications, with on-chip output resistors for voltage-output operation. Both devices are designed for 10pV-s glitch operation, to reduce distortion and minimize unwanted spurious signal components at the output. An on-board +1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation.
The MAX5182/MAX5185 are designed to provide a high level of signal integrity for the least amount of power dissipation. Both DACs operate from a +2.7V to +3.3V single supply. Additionally, these DACs have three modes of operation: normal, low-power standby, and complete shutdown. A full shutdown provides the lowest possible power dissipation with a maximum shutdown current of 1µA. Fast wake-up time (0.5µs) from standby mode to full DAC operation allows for power conservation by activating the DACs only when required.
The MAX5182/MAX5185 are available in a 28-pin QSOP package and are specified for the extended (-40°C to +85°C) temperature range. For pin-compatible 8-bit versions, refer to the MAX5188/MAX5191 data sheet.
The MAX5182/MAX5185 are designed to provide a high level of signal integrity for the least amount of power dissipation. Both DACs operate from a +2.7V to +3.3V single supply. Additionally, these DACs have three modes of operation: normal, low-power standby, and complete shutdown. A full shutdown provides the lowest possible power dissipation with a maximum shutdown current of 1µA. Fast wake-up time (0.5µs) from standby mode to full DAC operation allows for power conservation by activating the DACs only when required.
The MAX5182/MAX5185 are available in a 28-pin QSOP package and are specified for the extended (-40°C to +85°C) temperature range. For pin-compatible 8-bit versions, refer to the MAX5188/MAX5191 data sheet.
Technical Docs
数据资料 | 双路、10位、40MHz、电流/电压输出DAC,输出交替更新 | Mar 11, 2002 |