回到顶部

CMOS、四路、12位、串行输入乘法DAC

产品详情

主要特征

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

主要特征

  • Four 12-Bit Accurate DACs
  • Fast 3-Wire Serial Interface
  • Low Differential Nonlinearity: at ±½ LSB Max
  • Low Integral Nonlinearity: at ±1 LSB Max
  • Gain Accuracy to at ±1½ LSB Max
  • Low Gain Tempco: 5ppm/°C Max
  • Operates from a Single +5V Power Supply
  • TTL/CMOS Compatible
  • Available in 24-Pin DIP and 28-Pin SO Packages

应用/用途

  • µP控制系统
  • 任意波形发生器(AWG)
  • 自动测试设备
  • 数字增益/失调调节
  • 工业过程控制
  • 运动控制系统
  • 可编程放大器/衰减器

描述

The MAX514 contains four 12-bit R-2R multiplying digital-to-analog converters (DACs), each with a serial-in parallel-out shift register, a DAC register, and control logic. The MAX514’s 3-wire serial interface design minimizes the number of package pins and internal level translators, so it uses less board space and dissipates less power (10mW max) than parallel-interface devices.

When used with microprocessors (µPs) with a serial port, the MAX514 minimizes digital-noise feedthrough from its logic input pins to its analog output. To further reduce noise, the µP serial port can be used as a dedicated analog bus and kept inactive while the MAX514 is in use. Serial interfacing also simplifies opto-coupler or transformer-isolated applications. This device uses low-tempco thin-film resistors, laser trimmed to ±1 LSB linearity, with gain accuracy better than ±1½ LSB. The MAX514 is specified with a +5V power supply. All logic inputs are TTL and CMOS compatible. It comes in space-saving 24-pin DIP and 28-pin SO packages.

简化框图

MAX514:功能原理框图 MAX514:功能原理框图 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心