低功耗ADC IC

在给定应用条件下,我们的“低功耗”模/数转换器(ADC)具有低于市场上其它绝大多数同类产品的功耗。确定ADC是否为低功耗并没有明确的标准,因为不同的应用和架构对低功耗标准的要求不尽相同。这里主要介绍各种应用条件下,Maxim功耗最低的几款ADC。

按照参数表选择“低功耗”产品比较困难,因为对于大多数ADC来说,功耗与采样率有关。低采样率时功耗极低的产品在高采样率时也可能功耗快速增长。

以下链接介绍了几款Maxim功耗最低的ADC,推荐用于便携式、手持产品或电池供电设计。由于其功耗通常与采样率相关,设计人员通常会选择最低采样率以满足设计指标要求,从而节省电能。

低功耗高端SAR ADC 
低功耗高端Σ-Δ 
低功耗中档ADC 

以下为Maxim的几款低功耗ADC特色产品:

Introduction to the MAXM86161 Single-Supply Integrated Optical Module for HR and SpO2 Measurement

This video provides an introduction to Maxim’s Single-Supply Integrated Optical Module for heart rate and SpO2 Measurement – the MAXM86161.

Why Fast Time-to-Market Calls for Flexible EV Battery Management Systems

 

Why Fast Time-to-Market Calls for Flexible EV Battery Management Systems
The design of a smart sensor for electric vehicle batteries poses mechanical and electrical challenges. The MAX17853 is a flexible data-acquisition system for the management of high-voltage and low-voltage automotive battery modules. It allows for a flexible battery configuration that saves cost, time to qualification and time to market. With this solution, the voltage across each battery cell is measured with high accuracy for reporting and balancing, and the busbars are monitored for fault detection.

Featured part: MAX17853
Read more ›

Choose the Proper PMIC to Boost Your Optical Sensor SNR

 

Choose the Proper PMIC to Boost Your Optical Sensor SNR
Boost converters are typically used to step up the battery voltage in portable and wearable devices. However, they exhibit behavior that can negatively impact the signal-to-noise ratio (SNR) in optical sensing applications. In this design solution, we explain why this happens and then present a new type of power management using a PMIC that features a boost converter specifically designed to maximize SNR in optical sensing applications.

Featured parts: MAX20345, MAX86140
Read more ›

Introduction to the MAX25610A MAX25610B Synchronous Buck and Buck Boost LED Driver/DC-DC Converter

This video provides an introduction to the MAX25610A and MAX25610B, fully synchronous LED drivers that provide constant output current to drive high-power LEDs.

Introduction to the MAX16152 MAX16153* MAX16154* and MAX16155 nanoPower Supervisor and Watchdog Timer

This video provides an introduction to Maxim’s nanoPower Supervisor and Watchdog Timer family– the MAX16152 – MAX16155.

24μA IQ 独立式电量计,集成保护器

MAX17301XEVKIT

评估单节电池ModelGauge m5 EZ电量计,集成保护器和SHA-256安全认证

了解更多 ›

5.1μA、ModelGauge m5 EZ多节电池电量计

MAX17261XEVKIT

利用外部电阻分压器监测多节串联电池组

了解更多 ›

5.1μA、单电池电量计,具有ModelGauge m5 EZ和可选高边电流检测

MAX17260XEVKIT

评估独立式ModelGauge™ m5主机侧电量计IC,IC适用于手持式和便携式设备中的锂离子(Li+)电池。

了解更多 ›

设计小型,低功耗,模拟输入模块

 

"吉诺科技很高兴有机会与Maxim合作,为我们的模拟输入模块提供完美方案,且尺寸极小、支持多通道信号,提高用户体验和用户可采性。”
 - Li Yan,吉诺科技市场部现场总线项目经理

精选器件: MAX11270
了解案例 ›

业界唯一的ASIL级摄像机保护器,集成基于I2C的诊断功能

MAX20087

双/四通道摄像机电源保护器IC为每路输出提供高达600mA负载电流。

了解更多 ›

超小尺寸、3.2MHz、双通道、500mA、摄像机模块通用PMIC

MAX20019

2.2MHz和3.2MHz、双通道、降压型转换器,带有集成高边和低边MOSFET。

了解更多 ›

2.2MHz同步和双通道降压型转换器

MAX20014

OUT1输出将输入电压升压到高达8.5V、电流高达750mA,而两路同步降压型转换器工作在3.0V至5.5V输入电压范围,提供0.8V至3.8V输出电压,负载电流高达3A。

了解更多 ›

36V、600mA、微型Buck转换器,3.5µA IQ

MAX20076

同步buck转换器,集成高边和低边开关,在3.5V至36V输入电压下提供高达0.6A电流,空载时的静态电流仅为3.5µA。

了解更多 ›

隔离型、24V至5V、12.5W、无光耦反激电源

MAXREFDES120

小尺寸24V输入模块,带有副边同步MOSFET驱动器,输出为5V @ 2.5A。

了解更多 ›

隔离型、24V至5V、9W、无光耦反激电源

MAXREFDES119

小尺寸24V输入模块,带有副边同步MOSFET驱动器,输出为5V @ 1.8A。

了解更多 ›

Arm® Cortex®-M4F开发平台,用于电池供电设备

MAX32625MBED

支持MAX32625超低功耗微控制器的Mbed™兼容评估系统。Arduino®连接器和充裕的原型空间支持快速开发。

了解更多 ›

结构紧凑的开发板,用于构建小尺寸、低功耗IoT平台

MAX32630-EVKIT

功率优化Arm® Cortex®-M4F。最优外设组合,提高平台扩展性。板载Bluetooth® 4.0 BLE收发器,带芯片天线。

了解更多 ›

评估板串行通信模块

DS3900P2EVKIT

通过PC串口与2线和3线器件进行双向通信,用于评估各种时钟IC。

了解更多 ›

光学脉搏血氧仪和心率传感器评估系统

MAX86140EVSYS

允许灵活配置,支持以最小功耗实现最优测量信号质量。

了解更多 ›

36V、600mA、微型Buck转换器,3.5µA IQ

MAX20075

同步buck转换器,集成高边和低边开关,在3.5V至36V输入电压下提供高达0.6A电流,空载时的静态电流仅为3.5µA。

了解更多 ›

临床级提问传感器评估板

MAX30205EVSYS

包括USB至I2C转换控制器和GUI程序,简化评估过程

Learn more ›

±5ppm、I2C实时时钟外设模块

DS3231MPMB1

连接DS3231M RTC低成本、高精度RTC,适合任何用Pmod™兼容扩展端口配置I²C通信的系统。

了解更多 ›

健康传感器平台

MAXREFDES100

支持mbed™的传感器平台,快速评估可穿戴健康和健身方案。测量运动、温度、生物电势、脉搏血氧以及心率。

了解更多 ›

16位、四通道模拟输入微型PLC卡

MAXREFDES61

支持下一代超小尺寸PLC的完备模拟前端,电源和数据隔离。

了解更多 ›

WPC/PMA双模无线电源接收器评估板

MAX77950EVKIT

无线电源接收器与WPC或PMA发送器耦合时,利用近场磁感应工作,提供高达12W输出功率。



了解更多 ›

高精度热电偶至数字输出转换器评估系统,器件带线性度补偿

MAX31856EVSYS

包括MAX31856PMB1外设模块、与软件通信的适配器电路板、K型热电偶。

了解更多 ›

集成生物电势和生物电阻抗AFE评估系统

MAX30001EVSYS

提供多种配置,支持ECG、BioZ和起搏信号检测等各种测量。

了解更多 ›

18位高精度数字采集系统

MAXREFDES74

利用高精度、低功耗数据转换器实现高速、高精度数据采集。

了解更多 ›

4.5V至42V、300mA uSLIC电源模块3.3V输出电压评估板

MAXM15462EVKIT

可调节输入欠压锁定、可选模式和漏极开路低电平有效RESET,工作在500kHz开关频率。

了解更多 ›

可穿戴、皮电反应系统

MAXREFDES73

GSR测量检测人类皮肤在不同情况下的阻抗。

了解更多 ›

智能压力传感器

MAXREFDES82

可显示平台上物体重量和重心的工业传感器,支持高达780g重量。

了解更多 ›

4V至42V、100mA、结构紧凑的降压型电源模块

MAXM17532

集成控制器、MOSFET、电感和补偿元件,采用10引脚uSLIC™封装

了解更多 ›

4–20mA、2线电流环路传感器

MAXREFDES15

超低功耗、高精度、环路供电传感器变送器,可连接任意标准PT1000电阻传感器,并进行线性化温度转换产生4–20mA电流信号。

了解更多 ›

ECT/EPT电流故障传感器

MAXREFDES38

用于ECT/EPT低功耗传感器的高精度模拟前端,提高电网健康数据及故障测量精度。

了解更多 ›

4V至42V、100mA uSLIC电源模块5V输出电压评估板

MAXM17532EVKIT

逐周期峰值限流保护、欠压锁定和热关断,工作在600kHz开关频率

了解更多 ›

4–20mA环路供电温度传感器,带Hart功能

MAXREFDES16

2线、环路供电智能温度变送器方案,适用于温度测量。支持从PT100到PT1000任何类型的RTD。

了解更多 ›

高精度、长电池寿命热量/流量计

MAXREFDES70

低功耗、超声传输时间测量参考设计,适用于高精度液体流量测量。

了解更多 ›

Arm Cortex-M4F开发平台,优化用于电池供电的Bluetooth®设备

MAX32630FTHR

MAX32630超低功耗微控制器Mbed™开发平台。板载PMIC、Bluetooth和外设,支持快速开发,电路板尺寸只有0.9in x 2.0in。

Learn more ›

Arm Cortex-M4F开发平台,提供用于电池供电设备的扩展连接器

MAX32620FTHR

MAX32620超低功耗微控制器Mbed™开发平台。板载PMIC、电量计、外设和Pmod™连接器,支持快速开发,电路板尺寸只有0.9in x 2.0in。

了解更多 ›

显示驱动器平台

MAXREFDES99

Arduino平台,支持4片MAX7219 LED驱动器采用菊链连接,驱动标识应用中的16x16 LED点阵。

了解更多 ›

模拟功能丰富的Arm Cortex-M3开发平台

MAX32600MBED

MAX32600超低功耗微处理器Mbed™评估系统,处理器集成了先进的模拟功能和安全保护。Arduino连接器和原型空间用于支持快速开发。

了解更多 ›

MAXM17575 5V输出电压评估板

MAXM17575EVKIT

5V预设输出电压,负载电流高达1.5A,900kHz开关频率

了解更多 ›

Pocket IO™ PLC开发平台

MAXREFDES150

集成30路工业IO,以不到10平方英寸的面积实现更低散热和更快吞吐量。

了解更多 ›

DeepCover安全认证器演示套件

MAXAUTHDEMO

演示Maxim安全认证器在真实使用场景的软/硬件功能平台。

了解更多 ›

MAXM17761 5V输出电压评估板

MAXM17761EVKIT

5V预设输出电压,负载电流高达1A,537kHz开关频率

了解更多 ›

16位、 Δ-Σ ADC外设模块

MAX11205PMB1

将MAX11205超低功耗、16位ADC与任何Pmod兼容扩展端口(配置为GPIO)系统相连接。

了解更多 ›

3µA 1节/2节电池电量计,带ModelGauge

MAX17048EVKIT

最小、功耗最低的电量计,具有经过验证、仅依赖于电压的ModelGauge算法。

了解更多 ›

24位电子称

MAXREFDES75

高精度电子称参考设计,实现小信号24位测量,并产生与输入信号成比例的0至10V输出。

了解更多 ›

适用于Arduino平台的Pmod适配器

MAXREFDES72

Arduino至Pmod转换适配器,集成电平转换和引脚多路复用。

Arduino至Pmod转换适配器,集成电平转换和引脚多路复用。
了解更多 ›

DeepCover嵌入式安全平台,支持IoT安全认证

MAXREFDES143

演示从受保护传感器节点到网络服务器的安全认证数据链路。

了解更多 ›

7µA单电池电量计,采用ModelGauge m5 EZ

MAX17055XEVKIT

库伦计数与电压电量计量相结合,拥有最高SOC精度。

了解更多 ›

楼宇自动化平台

MAXREFDES130

Arduino架构、Mbed™兼容平台,包括0VDC-10VDC模拟输出、4–20mA输入/输出、闭锁/非闭锁继电器、RTC和1–Wire主机。

了解更多 ›

MAXM17574 5V输出电压评估板

MAXM17574EVKIT

5V预设输出电压,负载电流高达3A,650kHz开关频率

了解更多 ›

独立式ModelGauge m5电量计,集成SHA-256认证

MAX17201GEVKIT

提供非易失存储器(NVM),适用于电池组侧单节或多节电池应用。

了解更多 ›

通用输入微型PLC

MAXREFDES67

通用模拟输入,支持模拟电压和电流、所有RTD配置和热电偶,采用单一架构高精度采集模拟数据。

了解更多 ›

1-Wire Grid-Eye传感器

MAXREFDES131

检测方案具有Panasonic AMG8833 Grid-EYE®和Maxim 1-Wire® 总线,由DS28E17支持。

了解更多 ›

全桥直流电机驱动器Mbed平台

MAXREFDES89

Mbed兼容、Arduino架构平台,适用于有刷直流电机应用。驱动多达4个电机,带有电流调节,工作在7V至36V单电源。
了解更多 ›

完备的超低功耗Cortex-M4F微控制器评估板

MAX32620-EVKIT

功率优化Arm Cortex®-M4F。最优外设组合,提高平台扩展性。板载Bluetooth 4.0 BLE收发器和芯片天线。

了解更多 ›

GPS/GNSS超低噪声系数LNA

MAX2667EVKIT

噪声系数最低的GPS LNA,提供高增益和高线性度,微型封装。

了解更多 ›

MAXM17502 5V/1A输出应用评估板

MAXM17502EVKIT

12V至60V输入,5V@1A输出,效率大于84%。

了解更多 ›

隔离电源参考设计

MAXREFDES9

3.3V至15V输入、±15V (±12V)输出、隔离电源,适用于工业和医疗应用

了解更多 ›

支持可穿戴产品的超低功耗微控制器开发平台

MAX32630FTHR

功率优化Arm® Cortex®-M4F。最优外设组合,提高平台扩展性。板载Bluetooth® 4.0 BLE收发器和芯片天线。。

了解更多 ›

MAX17651评估板

MAX17651EVKIT

演示60V、100mA、超低静态电流、线性稳压器

了解更多 ›

MAX44284评估板

MAX44284EVKIT

演示MAX44284电流检测放大器的高精度、实时电流监测。

了解更多›

MAXM17515 1.5V/5A输出评估板

MAXM17515EVKIT

2.4V至5.5V输入,1.5V@1.5A输出,效率高于91%。

了解更多 ›

MAX44298 评估板

MAX44298EVKIT

评估MAX44298超低失调、低边电流检测、高精度电源监测器。

了解更多›

MAX1510评估板

MAX1510EVKIT

评估低电压DDR线性稳压器

了解更多 ›

MAXM17503 5V/2.5A输出评估板

MAXM17503EVKIT

11V至60V输入,5V@1A输出,效率高于93%。

了解更多 ›

适合狭小空间的超小尺寸开发板,有效降低功耗

MAX32625PICO

功率优化Arm® Cortex®-M4F。板载PMIC提供所有供电电压;超小尺寸、0.6in x 1.0in双排连接头。

了解更多 ›

40MHz至4GHz宽带线性放大器

MAX2615

具有优异增益平坦度的高性能宽带放大器,8引脚TDFN封装。

了解更多 ›

双通道检流外设模块

MAXREFDES77

将MAX44285双通道、高边电流检测放大器连接到任何使用Pmod兼容扩展端口系统。

了解更多 ›

GPS/GNSS超低电流LNA评估板

MAX2679/MAX2679B EV Kits - Evaluates: MAX2679/MAX2679B

无需附加电路即可测试RF性能。提供50Ω SMA输入和输出连接器。

了解更多›

适用于医疗和工业应用环境的浪涌保护/ESD保护评估板

MAX3003XEVKIT-cn

说明:经过完全测试的评估板采用MAX30034,能够吸收除颤及其它重复性高能量脉冲。

了解更多 ›

DeepCover嵌入式安全在IoT领域的应用:公钥保护数据通路

MAXREFDES155

安全IoT系统,从受保护传感器节点到网络服务器的公钥安全认证数据链。

适用于嵌入式设备开发平台的加密控制器

MAXQ1061 Evaluation Kit - Evaluates: MAXQ1061

信用卡大小的接口板允许通过10引脚连接器与可选的主机适配器进行通信和供电。

了解更多 ›

MAX30205评估系统

MAX30205EVKIT

MAX30205体温传感器评估系统。提供USB至I2C转换控制器和GUI。

了解更多›

Isolated, 24V to 5V, 10W Power Supply Reference Design

MAXREFDES114

Compact, 24V input, forward converter module with 5V at 2A output and pre-qualified transformers.

Learn more ›

非隔离24V至5.1V、20W电源

MAXREFDES125

高效、20W电源,适合工业和各种电源应用

了解详情 ›

隔离24V至3.3V、33W电源

MAXREFDES121

隔离型工业电源参考设计,其中每款电源将24V高效转换为各种功率水平的电压轨

了解详情›

Pocket IO PLC Development Platform

MAXREFDES150

Integrates 30 industrial IOs for lower heat dissipation and faster throughput in less than ten cubic inches.

Learn more ›

Turnkey PCI-PTS Mobile POS (MPOS) Terminal

MPOS-STD2

A complete mPOS solution, pre-evaluated by security labs for compliance with PCI-PTS 4.0 standards.

Learn more ›

Secure Authentication Design with 1-Wire ECDSA and Xilinx Zynq SoC

MAXREFDES44

Protects IP and authenticates peripherals to Xilinx Zynq™ FPGAs.

Learn more ›

DeepCover Embedded Security in IoT Authenticated Sensing and Notification

MAXREFDES143

Demonstrates an authenticated data chain from a protected sensor node to a web server.

Learn more ›

Isolated 24V to 5V 2W Flyback Power Supply

MAXREFDES111

This isolated, 24V to 5V, 2W, flyback power supply design delivers 79% peak efficiency and provides up to 400mA at 5V output. Multiple transformers have been pre-qualified to transformer selection.

Learn more ›

4-Port IO-Link Master

MAXREFDES79

4-Port IO-Link Master Reference Design Description: Four IO-Link ports allow for simultaneous testing of four different sensors or actuators.

Learn more ›

双通道电流检测外设模块

MAXREFDES77

兼容Pmod™、高精度电流检测模块,理想用于多通道、多路复用数据采集系统。

了解详情 ›

Non-isolated 5V/2.5A PoE Powered Device Power Supply

MAXREFDES98

This non-isolated PoE powered device design combines a PD controller and buck converter on a 1.2 in2 board. It accepts 36V to 57V input with 5V output up to 2.5A.

Learn more ›

Power Amplifier Biasing through MAX11300 PIXI IC

MAXREFDES39

This design uses a MAX11300 programmable mixed-signal I/O (PIXI™), to bias and monitor a power amplifier for an RF base station.

Learn more ›

SHA-256 Secure Authentication Design

MAXREFDES34 (Alcatraz)

This design implements SHA-256 authentication function using the 1-Wire protocol.

Learn more ›

心率和脉搏血氧监测器

MAXREFDES117

该参考设计是一款低功耗、光学心率模块,集成红光和红外(IR) LED以及电源。

了解详情 ›

智能压力传感器

MAXREFDES82

该参考设计安装有四个负载单元,采用多通道、24位模/数转换器(ADC), 来检测平板上的物体重量和重心。

了解详情 ›

3.3V and 5V PoE Powered Device

MAXREFDES31 (Pasadena)

This design is an IEEE 802.3af/at compliant. Powered Device (PD). In addition to regulating power received over Ethernet, device can also be powered from a wall adapter.

Learn more ›

IO-Link® 16 Channel Digital Input Hub

MAXREFDES36

This IO-Link® 16-channel digital input reference design includes a 16-bit micro with IO-Link device stack and fits on a small 53.75mm x 72mm PCB.

Learn more ›

Provide a Safe Power Path from the Car Battery to Remote Cameras

 

Provide a Safe Power Path from the Car Battery to Remote Cameras
Transmission of power and data on long coaxial cable bundles requires protection from various short-circuit modes (STG, STB). Remote cameras are small and require space- and power-efficient solutions. The MAX20039 buck-boost converter is an effective supply for power-over-coax. The MAX20087 quad power camera pro­tector is a compact, efficient protection IC. The dual MAX20019 cascade buck converter configuration delivers high efficiency in a small space. This triplet of ADAS ICs effectively provides power and protection to the path from the car battery to the remote cameras.

Featured parts: MAX20039, MAX20040, MAX20087, MAX20019
Read more ›

How to Efficiently Power Your Smart Gas/Water Meter

 

How to Efficiently Power Your Smart Gas/Water Meter
Smart meters operate for 10 to 20 years of time remotely and untethered, relying on powerful non-rechargeable lithium-thionyl-chloride batteries. They present a complex power-management design problem with energy sources that include batteries and supercapacitors. In this design solution, we discussed the challenges of powering a smart-meter wireless RF power amplifier. The solution is based on the MAX8815A, an efficient, low shutdown current and compact boost converter, which delivers the required peak current with the help of a supercapacitor.

Featured part: MAX8815A
Read more ›

开关转换器建模和实验室测量的精度比较?

 

开关转换器建模和实验室测量的精度比较?
Maxim的开关转换器模型和仿真受限于典型值,而更完整的最终设计构思要求我们考虑模型无法顾及的硅变化。在我们的研究中,电容或电感变化等非理想因子对压降的贡献为+/- 10mV (3.3V标称值的0.3%),说明在仿真期间需要考虑可预期的物理元件变化。

精选器件:MAX17242, MAX17242EVKIT,
了解更多 ›

Introduction to the MAX40077 MAX40078 MAX40089 Single/Dual/Quad Ultra-Low Input Bias Current, Low Noise Amplifiers

This video provides an introduction to the MAX40077/MAX40078/MAX40089 are wide band, low-noise, low-input bias current operational amplifiers that offer rail-to-rail outputs and single-supply operation from 2.7V to 5.5V.

Introduction to the MAX40242 20V, Low Input Bias-Current, Low-Noise, Dual Op Amplifier

This video provides an introduction to the MAX40242 which provides a combination of high voltage, low noise, low input bias current in a dual channel and features rail-to-rail at the output.

为可穿戴设备的微控制器提供高质量休眠时间

 

为可穿戴设备的微控制器提供高质量休眠时间
The MAX31341B为实时时钟IC,有助于延长便携式设备在不使用时的电池寿命。通过将微控制器从计时任务中解放出来,使其甚至能够处于更低功耗的深度休眠模式。

精选器件:MAX31341B
了解更多 ›

Introduction to the MAX17301 and MAX17311: 1-Cell ModelGauge m5 EZ Fuel Gauge with 2-Level Protector and SHA-256 Authentication

This video provides an introduction to Maxim’s 1-Cell ModelGauge m5 EZ Fuel Gauge with 2-Level Protector and SHA-256 Authentication—the MAX17301 and MAX17311.

Introduction to the DS28C40 Deep Cover Automotive I2C Authenticator

This video provides an introduction to Maxim’s Secure Authenticator for Automotive – the DS28C40.

Introduction to the MAXM15062-63-64-65-66-67-MAXM15462-63-64-65-66-67-MAXM17901-03-04-05-06 4.5V to 24V, 42V, 60V 300mA Himalaya uSLIC™ Step-Down Power Modules

This video provides an introduction to Maxim’s 300mA Himalaya uSLIC step-down power modules.

Introduction to the MAX31341B Low-Current, Real-Time Clock with I2C Interface and Power Management

This video provides an introduction to Maxim’s Low-Current, Real-Time Clock with I2C Interface and Power Management – the MAX31341B.

Introduction to the MAX17302 MAX17312 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

This video provides an introduction to the MAX17302/MAX17312, a 24μA IQ stand-alone pack-side fuel gauge IC with protector and SHA-256 authentication for 1-cell lithium-ion/polymer batteries.

[Sales Rep] Technical Training Basic 2019 Power Protection

"Technical Basic Training course presenting the basic of what system protection is, why it is needed, and the current challenges for system engineer trying to implement full system protection. This is a newer version of a previous one"

[Sales Rep] Technical Training Basic 2019 - Offset and Gain Error

Technical Basic Training course presenting the causes of Offset and Gain Errors in operational amplifiers and other devices in a typical signal chain and how to mitigate these errors through calibration.

[Sales Rep] Technical Training Basic 2019 ESD Tutorial

Technical Basic Training course presenting an overview of Electrostatic Discharge and how to protect the integrated circuits from that phenomenon.

[Sales Rep] Technical Training Basic 2019 - Frequency Synthesizer

Training course presenting an overview of Frequency Synthesizer using Phase Locked Loop method.

[Sales Rep] Technical Training Basic 2019 Understanding DAC Specifications

Technical Basic Training course explaining the key specifications of Digital to Analog converters.

Introduction to the MAX20039-40 2V to 36V, 2.1MHz, 0.6A/1.2A Automotive Buck Boost Converters

This video provides an introduction to Maxim's 2V to 36V, 2.1MHz, 0.6A/1.2A Automotive Buck Boost Converters - the MAX20039-40.

[Sales Rep] Technical Training - Basic Curriculum 2019

This curriculum contains six courses: DAC Specifications, Frequency Synthesizers, ESD, Power Protection, NFC/RFID, Signal Chain Offset and Gain Errors

Introduction to the MAX20026 MAX20026S Automotive Quad, Low-Voltage Step-Down DC-DC converters with Low-Noise LDO

This video provides an introduction to Maxim's Automotive Quad, Low-Voltage Step-Down DC-DC converters with Low-Noise LDO - the MAX20026 and MAX20026S.

How to Use the MAX31342SHLD Evaluation Kit

Tawni sets up the MAX31342SHLD, which evaluates the MAX31342 low-current real-time clock (RTC). She walks through the GUI and shows some of the MAX31342SHLD’s features, including real-time monitoring and low timekeeping current.

Learn more: MAX31342SHLD ›

How to Use a Flyback Converter to Achieve Isolated Voltage Level Shifting

Teja explains how to translate a single-ended voltage at the input to a bipolar voltage at the output using an isolated flyback converter. He goes over the importance of isolation in a circuit and the circuit elements that can be used for isolation. He finishes with a demonstration of how to use the MAXREFDES1141 and the MAXREFDES1132 to achieve isolated voltage-level shifting.

Learn more: MAXREFDES1141 ›
Learn more: MAXREFDES1132 ›

How to Update the Firmware on the MAXREFDES101 Health Sensor Platform 2.0

Sankalp explains how to easily update the firmware on the MAXREFDES101 Health Sensor Platform 2.0 to quickly start programming the onboard electrocardiogram (ECG), photoplethysmography (PPG), and human body temperature sensors.

Learn more: MAXREFDES101 ›

How to Safely Demagnetize Your Inductive Load Using SafeDemag

Travis and Cynthia show how to use SafeDemag™ to safely and quickly demagnetize your inductor when using switching inductive loads. They explain inductive switching and the differences in freewheel diodes, zener clamps, active clamps, and Maxim’s SafeDemag solutions.

Learn more: MAX14912EVKIT ›

Introduction to the MAX38904A/B/C/D 2A Low Noise LDO Linear Regulator in TDFN

This video provides an introduction to Maxim's Low Noise LDO Linear Regulator in TDFN - the MAX38904A MAX38904B MAX38904C MAX38904D.

Introduction to the MAX30208 Low-Power, High-Accuracy Digital Temp Sensor

This video provides an introduction to Maxim’s low-power, high-accuracy digital temp sensor – the MAX30208.

Introduction to the MAX25600 Synchronous High Voltage 4 Switch Buck Boost LED Controller

This video provides an introduction to the MAX25600, a synchronous 4-switch buck-boost LED driver controller.

Introduction to the MAX17303 MAX17313 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector

This video provides an introduction to Maxim's 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector - the MAX17303 and MAX17313.

Introduction to the MAX20029 MAX20029B MAX20029C Automotive Quad/Triple Low Voltage Step-Down DC-DC converters

This video provides an introduction to the MAX20029/MAX20029B/MAX20029C power-management ICs (PMICs) which integrate four low-voltage, high-efficiency, step-down DC-DC converters.

Power Protection Fundamentals

In an imperfect world, unpredictable things can happen such as power surges resulting in failing components. System protection strategies help solve these fault problems and preserve system integrity. Learn some tricks of the trade to solve power protection problems before they even occur.

Learn More: Protection and Control ›

Introduction to the MAX31342 Low Current Real Time Clock with I2C Interface

This video provides an introduction to the MAX31342 low-current, real-time clock (RTC) is a time-keeping device that provides an extremely low timekeeping current, permitting longer life from a power supply.

Micro Speaker 101

Michael explains the similarities between a micro speaker and a standard speaker, and describes its three main components - the diaphragm, coil, and magnet. He then tears down a micro speaker to show the various parts of the device including its speaker driver.
Learn more: Dynamic Speaker Management ›

What is DSM and How Does It Work?

Greg explains how Dynamic Speaker Management (DSM) Smart Amplifier technology can overdrive micro speakers safely and reliably, delivering 2.5x greater loudness and deeper bass response. Michael then demonstrates how a DSM-enabled micro speaker responds to lower frequencies and provides protection against overtemperature and over excursion using the DSM Sound Studio’s Tuning feature.
Learn more: Dynamic Speaker Management ›

Is DSM a Fit for My System?

Greg presents an overview of the speakers best suited for DSM. In this video, he explains how DSM works with the three most common types of micro speaker configurations: a speaker driver in a sealed enclosure, a bare driver, and a ported speaker.
Learn more:Dynamic Speaker Management ›

 

HSP(2) - 如何下载固件程序到MAXRFEDES100#Hsensor平台

本视频主要介绍了如何将自己的固件程序下载到MAXREFDES100# Hsensor平台上,并且利用HSP平台开发自己的项目

Introduction to the MAX32665 MAX32666 MAX32667 and MAX32668 Low Power ARM Cortex-M4 with FPU-Based Microcontroller w/ Bluetooth 5 for Wearables

This video provides an introduction to the MAX32665-MAX32668 UB class microcontroller, which is an advanced system-on-chip featuring an Arm® Cortex®-M4 with FPU CPU for efficient computation of complex functions & algorithms.

How to Set Up the MAXREFDES117 Heart-Rate and Pulse-Oximetry Monitor with an Arduino Board

Ben demonstrates how to use the MAXREFDES117 heart-rate and pulse-oximetry reference design with an Arduino® microcontroller to read heart-rate signals and monitor SpO2 levels. He also demonstrates some common issues and how to resolve them.

Lean More: MAXREFDES117 ›

How to Get Started Logging Temperature with DS1925 iButton Temperature Data Logger

Venkatesh explains how to use the DS1925 iButton® Thermocron® data logger with Maxim’s OneWireViewer software to quickly and easily log temperature data. He also explains how the DS1925 differs from Maxim’s other temperature logger, the DS1922.

Learn More: DS1925 ›

How to Get Started Using the EE-SIM OASIS Simulation Tool to Accurately Simulate Your Circuit Designs

Learn how to simulate a switching power circuit using the EE-Sim® OASIS Tool. Built on the SIMPLIS® simulation engine, the OASIS simulator for switched-mode power ICs provides over 150 power reference designs, which are ready to copy, modify, and simulate.

Learn More: EE-SIM OASIS ›

Synchronous Buck and Buck-Boost LED Drivers/DC-DC Converters

MAX25610A/MAX25610B

Automotive-grade LED drivers with integrated MOSFETs and internal current sense drive up to 3A LED.

Learn more ›

Automotive High-Voltage, HB LED Controllers

MAX25611A/B/C/D

5V to 36V VIN, up to+65V boost output, support multiple configurations for front-end lighting and other LED applications.

Learn more ›

Synchronous 5V to 60V, 4-Switch Buck-Boost LED Driver Controller

MAX25600

Provides seamless transition between buck, buck-boost, and boost modes to drive wide range of LEDs with up to 95% efficiency.

Learn more ›

[Sales Rep] FAE Technology Workshop: IO-Link Smart Sensors (PRE-WORK)_

This session was developed as pre-work for the 2016 Tech Workshop and is a simple introduction to IO-Link. Discussed are: what is IO-Link and why it is used.

[Sales Rep] IP3 Demystified

This session discusses the IP3, a common specification in RF circuitry and components. The term is defined, locations within an RF circuit where it is significant are identified, then IP3 is described in terms of transfer functions. Note – the audio has dropped out of several of the last slides.

[Sales Rep] Technical Training, Basic 2018: Pulse Oximetry_

Technical training course presenting an overview of Pulse Oximetry, PPG and their applications.

[Sales Rep] Technical Training, Basic 2019: NFC and RFID

"Technical Basic Training course presenting an overview of Near Field Communication and RFID and their applications. "

[Sales Rep] FAE Technology Workshop: hSensor Platform, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Hand's on session to evaluate the hSensor platform. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: John DiCristina. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Technical Training - Basic Curriculum 2019 (Part 2)

This curriculum contains six courses: DAC Specifications, Frequency Synthesizers, ESD, Power Protection, NFC/RFID, Signal Chain Offset and Gain Errors

[Sales Rep] FAE Technology Workshop: Medical Terminology, Regulatory and Standards, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Understand the commonly used medical terminology and regulations guiding our customer design cycles. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: Larry Skrenes. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Analog Output Branch Training

This presentation is focused on industrial analog output devices and intended for distributors. Covered are: Where analog outputs are used and their applications, design approaches, solutions from competitors and reference designs/tools available.

[Sales Rep] Maxim Experts Program, Advanced Course: Secure Authentication (2)

Maxim Experts Program course presenting an overview of security authentication based on SHA-256 as well as ECDSA and their applications.

[Sales Rep] FAE Technology Workshop: Temperature Measurement (PRE-WORK)

Please pre-load this software before taking the FAE Technology Workshop: Temperature Measurement course.

[Sales Rep] 4-Channel Analog Output Campaign Training

Overview of the devices and support tools available in support of the 4-Channel Analog Output Campaign

[Sales Rep] 4-Channel Analog Output - Design Accelerator Kit (Mandarin)

This presentation focuses on the Analog Output Design Accelerator kit. Explains what an analog output is, where it is used and options available for designing an analog output module. Finally, it is shown how Maxim’s Design Accelerator kit makes it easy to demonstrate and evaluate Maxim’s solution.

[Sales Rep] Maxim Masters, Tokyo 2017: Presentations for courses S - Z.

This material contains PDF versions of the presentations from Maxim Masters, Tokyo 2017. Presentations for courses from S-Z. It also contains any installation files needed for each course. Ensure pop-up blockers are off to allow zip file to download.

[Sales Rep] RF Solutions Update - Sept 23 2016

Product update from the RF Solutions BU. Review of the business organization and broad product categories. The focus of this update is (1) Linearizers, (2) Macro Cell, (3) Multi-Market RF (MMRF) and (4) RF Amplifiers. Key markets for each of these product types are described. Products covered include: LNA, Power Detector, PLL/VCO, Synthesizer, PLL, Gain Block, VGA, Mixers, RF Linearizer, GNSS and Tuner.

[Sales Rep] LED Drivers Update

Product update on LED driver devices. Includes an explanation of LED driver functionality and operation, and target markets. Emphasis is on MR16 and PoE lighting applications..

[Sales Rep] FAE Technology Workshop: 4-Pair Power Over Ethernet, Cloud & Data BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: An advanced look into the 4PPoE technologies to serve the emerging market for higher power via POE. The issuing BU is: Communication. For content related questions, contact the trainer: Gaoling Zou. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Technical Training – Basic Curriculum 2018 (Part 1)

This curriculum contains four courses: Pulse Oximetry, RF Linearizers, NanoPower, Low Power Microcontrollers.

[Sales Rep] Technical Training, Basic 2018 Low Power Microcontrollers_

Technical training course discussing the basics of Low Power MicroControllers, development tools and MAX32660.

[Sales Rep] LED Driver Customer Presentation (Mandarin)

Overview of Maxim LED driver products. Focus is on devices for MR16 and AR111, POE lighting and DC Lighting. Discusses design challenges, competition, measuring efficiency and Maxim solution.

Basic introduction to multiplexers which discusses the operation, uses and configurations of multiplexers.

[Sales Rep] SC2200 RF Linearizer FAE Training

Detailed introduction to the SC2200 RF Linearizer. Covers the theory of operation, differences between the SC2200 and its predecessor, performance results, applications and support tools available.

[Sales Rep] IC Device Packages

This course presents a thorough explanation of IC packaging. Topics covered include IC and packaging basics, interrelation between the device and the package, terminology and nomenclature, discussion of various package types and how to locate information on packages.

[Sales Rep] Maxim Star Products

Discussion of the Star Products and associated “One More Socket” campaign. Star products from each category listed and details are provided on one or more products from each. Sales tools are also highlighted.

[Sales Rep] RS-485 -- Half or Full Duplex? Level 1 Industrial Training

This session explains the difference between half and full duplex transceivers. Includes: explaining the RS-422 and RS-485 standards, half duplex, full duplex and what applications use RS-422 and RS-485.

[Sales Rep] Introduction to Electronic Point of Sale (EPOS) Security

Introduction to security associated with electronic point-of-sale (EPOS) terminals. Includes a simplified explanation of security principles, what is protected and various methods used to protect EPOS equipment.

[Sales Rep] MAXQ1061 Embedded Security

This session provides an update on security devices. Included are: an introduction to Maxim DeepCover security devices, IoT security essentials and the MAX1061 security co-processor.

[Sales Rep] Technical Training, Basic 2018: NanoPower_

Technical training course discussing what is nanoPower and how to achieve them by utilizing devices that are optimized for quiescent power consumption.

[Sales Rep] Electromagnetic Interference (EMI) Level 1 Industrial Training

Introduction to Electromagnetic Interference. EMI is defined, what causes EMI, how it effects integrated circuits, techniques to reduce EMI and several Maxim devices which reduce EMI.

[Sales Rep] FAE Technology Workshop Industrial System Protection, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Find out how to confidently position the technical merits of Maxim’s protection ICs versus discrete and competing solutions. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: Sidney Chan. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] FAE Technology Workshop: Power for Medical and Fitness, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: A deep dive into Maxim's successful Wearable PMIC product line. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: Greg Steiert. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Himalaya Buck Converter Customer Engineering Presentation

The Himalaya product line is a series of DC-to-DC power supply modules. This presentation explains the use and applications of DC-to-DC power modules, the design challenges that they solve and the advantages that Maxim’s devices offers. The use of Maxim’s EE-Sim System Power Tool to ease the design process is also presented.

[Sales Rep] Introduction to SPICE Simulation, Module 3 - Running (EE-sim) SIMetrix spice simulation

Module three of four modules on Simetrix / Spice training. In this module simulations are set up and run and provides an overview of running DC operating point, Transient, AC Sweeps, Parameter sweeps, and Monte Carlo simulations..

[Sales Rep] Introduction to Medical Electronics

This course provides an introduction to medical electronics in medical applications and products. Included is an overview of FDA regulations and standards governing medical devices, parameters being measured, specific application areas and challenges in measurement techniques. Several Maxim devices targeted at medical applications are reviewed.

[Sales Rep] LiveLab Training on MAXREFDES67 Universal Analog Input uPLC

LiveLab training on the MAXREFDES67 = Universal Analog Input uPLC board. After a presentation on the board, students follow along to perform various calibration and measurement exercises.

[Sales Rep] Digital Output Module Level 1

Introduction to Digital Output Modules. Defines what a digital output module is, where it is used, what’s inside, some product examples and design trends.

[Sales Rep] InTune Digital Power Training and Volterra Overview

This training cover two topics. The first is a detailed technical presentation on the InTune programmable switching regulators. The second portion provides an overview of the Volterra product line.

[Sales Rep] FAE Technology Workshop: Wireless for Medical, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Introduction to RF technology commonly used in medical and fitness applications. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: Greg Steiert. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] FAE Training - Two Phase Step-Down Switching Regulator

This session is focused on the MAX8972 – two phase, 6 amp buck regulator. Includes features/benefits, application information and examples.

[Sales Rep] FAE Technology Workshop: New 12-Port PIXI - Overview and Applications (Files)

"Ahead of the New 12-Port PIXI - Overview and Applications workshop: 1. Download and install the 'PIXI_Pre-Install' configuration file found in the Resources section of this training. 2. Download the required files titled 'MAX11311 Demo Madrid'."

[Sales Rep] FAE Technology Workshop: Fuel Gauging Hand's On (Files)

Downloads, pre-installs and documents to accompany the Fuel Gauge Hand's On workshop.

[Sales Rep] Slew Rates Level 1 Industrial Training

Understanding slew rates in industrial products. Discusses why slew rates are important, when slew rates need to be considered in a design and a few examples.

[Sales Rep] FAE Technology Workshop: Temperature Measurement, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Update on the latest devices in Maxim's temperature sensor and sensor interface product line. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: Kerry Lacanette. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] FAE Technology Workshop: DC-DC Isolation with Primary Side Sensing, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description:Maxim's patented primary side sensing topology that eliminates the need for opto-coupler feedback for isolated DC-DC applications. The issuing BU is: Industrial. For content related questions, contact the trainer: Ramesh Giri. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Maxim Masters 2017: Secure Authenticators (PRE-WORK)

Please watch this pre-work video for the Secure Authenticators course at Maxim Masters 2017.

[Sales Rep] Maxim Masters, San Jose 2017: Presentations for courses M - Z.

"This material contains PDF versions of the presentations from Maxim Masters, San Jose 2017. Presentations for courses from M-Z. Ensure pop-up blockers are off to allow zip file to download. NOTE: This content is very similar to content that will be delivered at future Maxim Masters events in 2017."

[Sales Rep] FAE Technology Workshop: Medical Sensor Technology, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description:Understand the trade-offs and performance requirements for clinical and sensor applications. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: Rob Johnson & Larry Skrenes. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Digital Input Module - Level 1

Introduction to Digital Input Modules. Defines what a digital input module is, where it is used, what’s inside, some product examples and design trends.

[Sales Rep] FAE Technology Workshop: Simple and Effective Communication Skills for FAEs

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is the PDF version of a presentation delivered at the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Best practices for technical communication between FAEs and business units. For content related questions, contact the trainer: Sean Gold. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] DMS-SAP New Maxim Document Management System Training Adapted for Field

This session explains how to install, register and use the document management facility within SAP. This presentation is targeted at users in the field (FAEs)

[Sales Rep] Analog Output Module - Level 1

Introduction to Analog Output Modules, one of the building blocks used in Programmable Logic Controllers (PLC). Discusses what an analog output is, what its function is, what’s inside it and where it is used. Finally, some product examples are shown along with design trends.

[Sales Rep] Reliability, Quality and the Reliability Report

Overview of the reliability report and its importance to both the customer and to Maxim. Topics include: purpose of the reliability report, definitions, impact of the report, information included in the report and locating specific information.

[Sales Rep] Precision Data Converter Update

Update on precision data converters including a review of the overall product line, focus markets and end equipment and product portfolios and road maps.

[Sales Rep] Fieldbus Module Level 1

Introduction to Field Bus Modules. Defines what a field bus module is, where it is used, what’s inside, some product examples and design trends.

[Sales Rep] Fault Protection Level 1 Industrial Training

Introduction to fault protection in transceiver ICs. Covers the purpose of fault protection, why fault protection is needed, different types of fault protection and some Maxim examples.

[Sales Rep] Isolated Buck FAE Training

Technical presentation on isolated buck converter. The Iso-Buck feature implemented in several Maxim devices is discussed. Includes a detailed explanation of Iso-Buck operation, application issues and examples.

[Sales Rep] FAE Technology Workshop: A Survey of Switching Regulator Control Architectures, Cloud & Data BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: A brief survey of switching regulator control architectures. The issuing BU is: Cloud & Data. For content related questions, contact the trainer: Mike McJimsey. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Introduction To SPICE Simulation, Module 2 - Spice Overview and Adjusting the SIMetrix Spice Options

Module two of four modules on Simetrix / Spice training. Overview of the development of spice, variations in commercial versions, convergence, and adjusting the spice options.

[Sales Rep] FAE Technology Workshop: Introduction to RF-DACs and Cable Access Products, Core Products BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Hands-on lab exercise to configure and demonstrate Maxim's RF DACs using the evaluation kit and FPGA board. The issuing BU is: Communication. For content related questions, contact the trainer: Shannon Horwitz & Tim Church. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] FAE Technology Workshop: Maxim’s mbed Microcontrollers for the IoT, Micros & Security BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: An introduction to concepts in the IoT, and hands-on experience with Maxim's mbed micro controller platforms. The issuing BU is: Micros & Security. For content related questions, contact the trainer: Ben Smith. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] FAE Technology Workshop Digital Isolation Technology for Industrial and Healthcare Applications, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: In-depth review of isolation techniques, safety standards, and understanding the end applications and key specs. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: Sean Long & Wei Shi. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] ESD Protection Level 1 Industrial Training

Electrostatic Discharge (ESD) is defined as well as how it affects integrated circuits. Also covers some techniques to protect against ESD damage and discusses Maxim’s design and testing standards for integrated ESD protection. Finally, a few examples of available Maxim ICs which include integrated ESD protection are presented.

[Sales Rep] Signal Integrity: PCB Layout Example 1 of 3

Third of five modules in the Signal Integrity curriculum. Explanations and recommendations for a good Circuit Board design in respect to Signal Integrity and EMC issues. The speech came from www.Learn.com and was addressing EMC issues; but the rules apply for Signal Integrity in general.

[Sales Rep] FAE Technology Workshop: Fuel Gauging Hand's On, Mobile BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Lab work with Maxim fuel gauges. This session is a follow up to ""Fuel Gauging Deep Dive"". The issuing BU is: Mobile. For content related questions, contact the trainer: Eric Huang. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Analog Signal Chain - OpAmps (Mandarin)

Brief introduction to op-amps. Includes an overview of op-amps, relevant specifications and selection criteria, typical applications and an overview of Maxim’s op-amp portfolio.

[Sales Rep] Introduction to Power Reference Designs from TTS

This session introduces a new, growing collection of power reference designs developed by TTS. Discusses the benefits to Maxim and our customers of having proven reference designs, where to find information on the existing collection and how to propose new designs to TTS.

[Sales Rep] FAE Technology Workshop: Motion Control, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Control strategies for basic DC motor control using Maxim’s DC motor drivers and Incremental Encoder Receivers. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: Micheal Scherrenburg. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] LED Driver Disty Presentation

Overview of Maxim LED driver products. Focus is on devices for MR16 and AR111, POE lighting and DC Lighting. Discusses design challenges, competition, measuring efficiency and Maxim solution. Additional information for distributors is included in this version of the presentation.

[Sales Rep] LiveChat Agent Training

Training targeted for anyone who will be interfacing to customers via the LiveChat service. I.e. – the LiveChat agent receiving user requests via the service. A typical scenario is used to explain its operation.

[Sales Rep] Introducing Request Tracker 2.0 and Knowledgebase

This session discusses Request Tracker 2 and Knowledgebase. Covers the history of Request Tracker, the new enhancements and how to use it.

[Sales Rep] Signal Integrity: IBIS Modeling

Second of five modules in the Signal Integrity curriculum. Topics include IBIS model creation, verification and simulation. It explains how IBIS models are extracted and used in simulators such as Hyperlynx or Sigrity

[Sales Rep] Maxim Masters 2017: Fuel Gauge (PRE-WORK-FILES)_

Please download all of these documents before attending Maxim Masters. Also ENSURE that all zip files have been installed for each part before arriving to class.

[Sales Rep] FAE Technology Workshop: Fuel Gauging Deep Dive (Pre-Work 2)

This is the second pre-work for the FAE Technology Workshop: Fuel Gauge Deep Dive course.

[Sales Rep] FAE Technology Workshop: Ultrasonic Flow Measurement, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Theory and application of ultrasonic flow measurement and details on Maxim’s unique flow measurement product line. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: Drew Sens. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] FAE Technology Workshop: Cloud and Data Products in Prime Time, Cloud & Data BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Overview of Cloud/Data Center products that should be actively promoted to Maxim’s Customers. The issuing BU is: Cloud & Data. For content related questions, contact the trainer: Sean Gold. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Solutions for Factory Automation

This session discusses Maxim’s technology as it enables next generation automation systems and contains information relevant for discussions with customer executives. Topics covered include customs alignment, factory automation trends, solution leadership and operational excellence.

[Sales Rep] FAE Technology Workshop: NFC/RFID System Design, Micros & Security BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Overview of NFC technology including customer reader/tag antenna design considerations, customer FAQ and antenna analysis demo. The issuing BU is: General. For content related questions, contact the trainer: Tom Bui. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] FAE Technology Workshop: ADCs - Update and Differentiators, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Learn about the definition choices that were made on Maxim’s latest ADC offerings to differentiate Maxim’s ADCs within the market. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: Martin Mason. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] FAE Technology Workshop: Securing Your System Design and IP, Micros & Security BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Introduction to the features and benefits of Maxim's Cortex M4F Trust Protection Unit (TPU).. The issuing BU is: Micros & Security. For content related questions, contact the trainer: Seth Messimer. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Maxim Masters 2017 Automotive Power (PRE-WORK 1.1)

This is the pre-work the Maxim Masters Automotive Power course. Review all of the datasheets for the parts listed and bring any questions you have to the live session.

[Sales Rep] IC Fab - Diffusion 1 of 3

First of three sessions which explains the diffusion process in IC fabrication. This module includes an overview of diffusion, why it is used, and the entire process from a top level. The second part of this module explains the physics, fundamentals, mechanisms and parameters associated with diffusion.

[Sales Rep] MAX98371 and MAX98372 High-Power Digital Input Amplifier

Discussion of two audio amplifier products which feature Dynamic Headroom Tracking (DHT).

[Sales Rep] IC Fab - Diffusion 3 of 3

Third of three sessions which explains the diffusion process in IC fabrication. This module presents the roles and effects of doping/diffusion in the overall fabrication process. Doping, protection, and connections are discussed.

[Sales Rep] Maxim Supervisory Products

Each sub-category within the supervisory product line is described: what it does, Maxim advantages and example/key devices.

[Sales Rep] FAE Technology Workshop: Digital Isolation Technology for Industrial and Healthcare Applications (PRE-WORK)

This is pre-work for the Digital Isolation Technology for Industrial and Healthcare course.

[Sales Rep] Current Sense Overview

This session provides an overview of current sense amplifiers and an update on the product line. Includes a brief description of CSAs and an overview of key parts including technical highlights..

[Sales Rep] FAE Training - DC Brushed Motor Drivers

This session provides background on motor types (brushed DC, brushless DC and stepper) followed by a discussion of Maxim motor driver ICs.

[Sales Rep] Fail Safe Level 1 Industrial Training

This session explains the Fail-Safe feature available in a number of Maxim’s interface products. Includes a description of the fail-safe function, why it is needed, how it works protect the system and a few examples.

[Sales Rep] RF Basics - Transmitters

Introduction to RF fundamentals with a focus on transmitters. Following a review of Maxim’s RF web pages and quick introduction to transmitter devices, RF units and parameters are discussed. The transmit signal chain is introduced and the key building blocks are a transmitter presented. Finally, the key specifications of a transmitter are reviewed

[Sales Rep] PMFI Sensor Module - Level 1

Introduction to Process Measurement and Field Instruments (PMFI). Defines what a sensor module is, where it is used, what’s inside, some product examples and design trends.

[Sales Rep] Himalaya Branch Training Presentation

The Himalaya product line is a series of DC-to-DC power supply modules. This presentation explains the use and applications of DC-to-DC power modules, the markets they serve, the design challenges that they solve and the advantages that Maxim’s devices offers. Finally, tips on overcoming customer objections are offered.

[Sales Rep] Hot Swap Functionality in RS-485 Devices Level 1 Industrial Training

Tutorial on hot-swap functionality in RS-485 interface devices. Discusses what hot-swap is, how it works and a few Maxim examples.

[Sales Rep] Core Automotive Product Update - Feb 2018

This session provides a general, comprehensive overview of the automotive products from the Core business unit. This includes all /V products. The focus of the presentation is on general product categories and quality.

[Sales Rep] What is a PLC?

Basic introduction to Programmable Logic Controllers (PLC). Provides a history of automation, what PLCs do, where they are found and what they do.

[Sales Rep] Protection ICs Field Training

Technical deep dive into Maxim’s Protection ICs from the Industrial Power team. The first section covers what protection ICs are, where they fit in a design and the advantages that Maxim’s protection ICs offer. The second section is applications oriented and discusses completing a design, details of operation, example applications, application problems and common questions.

[Sales Rep] Low Power Microcontrollers Update

Update on low power microcontrollers. The focus is on the “ultra low power micro family”. The MAX3262x family is introduced. The emphasis is on unique features and product differentiators.

[Sales Rep] Maxim MCU Overview - 12Dec2017

This course provides an update on Maxim’s microcontroller product line with emphasis on IoT markets and applications. Market segments are reviewed followed by the roadmap and an overview of several specific devices.

[Sales Rep] Signal Integrity: PCB Layout Example 3 of 3

Third of five modules in the Signal Integrity curriculum. Explanations and recommendations for a good Circuit Board design in respect to Signal Integrity and EMC issues. The speech came from www.Learn.com and was addressing EMC issues; but the rules apply for Signal Integrity in general.

[Sales Rep] Multi-Socket Design-In Training

First of several trainings on the Multi-Socket Design-in (N+1) campaign. Three of the select block diagrams in the KeyPad tool are reviewed: Recloser controller, Cable downstream RF signal chain and small cells.

[Sales Rep] FAE Technology Workshop: 4-Pair Power Over Ethernet (PRE-WORK)

This is the pre-work for the 4-Pair Power Over Ethernet self-paced training course.

[Sales Rep] FAE Technology Workshop: Introduction to Coupled Inductors, Cloud & Data BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Discuss the use of coupled inductors in multi-phase switching regulators including practical design knowledge and fundamental advantages. The issuing BU is: Cloud & Data. For content related questions, contact the trainer: Alex Ikriannikov. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] Maxim Motor Control Solutions (Mandarin)

This session discusses motor control solutions including ADCs, encoder interface, RS-422 transceivers and current sense amplifiers.

[Sales Rep] Industrial and Healthcare Update

Update on Industrial Automation. Discusses the Industrial strategy, a top level overview of the product line and target markets. Products discussed in more detail are motor control products.

[Sales Rep] Undervoltage and Overvoltage Protection Level 1 Industrial Training

This training explains undervoltage and overvoltage protection as they apply to interface devices and analog switches. Both are first defined, then it’s shown how they are implemented in ICs. Finally, a few examples of Maxim parts which implement this protection are shown.

[Sales Rep] Introduction to Fitness Wearables

An overview of fitness products. Includes product examples, what they do and measurements they take, the ecosystem for fitness products, and market trends. Finally, a typical block diagram of a fitness product is reviewed noting key blocks and potential opportunities.

[Sales Rep] Technical Training, Basic 2018: RF Power Amplifier Linearizers_

This technical training course discusses power amp linearization and popular techniques to achieve it such as Power Backoff, RF PAL and Adaptive Predistortion.

[Sales Rep] IC Fab - Diffusion 2 of 3

Second of three sessions which explains the diffusion process in IC fabrication. This module discusses the various types of diffusion in detail, terminology used, pros and cons of various metals and the types of equipment used.

[Sales Rep] Standard Power Supply Update

This presentation discusses the power products covered by the Core Products group. These are single function standard power products which operate at input voltages up to 60V. Includes new products and ‘how to sell’.

[Sales Rep] FAE Technology Workshop: Fuel Gauging Deep Dive (Pre-Work 1)

First of three pre-work videos prior to the Fuel Gauge sessions in the FAE Technology Workshop - SJHQ, March 7-10, 2016.

[Sales Rep] Introduction to SPICE Simulation, Module 4 - SIMetrix spice/EE-sim Waveform Viewer

Module four of four modules on Simetrix / Spice training. Overview of using the waverform viewer in SIMetrix spice and EE-sim. Take measurements, scripted measurements, export simulation data to Word and Excel.

[Sales Rep] FAE Technology Workshop: New 12-Port PIXI - Overview and Applications, Industrial & Healthcare BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: An introduction to and overview of the MAX11311, a 12-port addition to the PIXI product line along with example applications. The issuing BU is: Industrial & Healthcare. For content related questions, contact the trainer: June Li & Kien Mach. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] RS-485 Driving Loads Level 1 Industrial Training

Introduction to RS-485 with an emphasis on load requirements and drive capabilities. Reviews the basics RS-485 standard and where it is used, then defines an RS-485 load and how that affects the performance.

[Sales Rep] FAE Technology Workshop: Automotive Overview, Automotive BU

"Originally designed for Field Applications Engineers courses in this series are generally suitable for participants with a minimum level of technical knowledge, although some may require a more advanced technical background. Generally, as a result of completing this training an individual will gain a deeper and more technical understanding of the Maxim product and technology covered, enabling more effective customer interactions and engagements. This is a recorded workshop from the “FAE Technology Workshop” held on March 7-10, 2016, at the Maxim SJHQ location. Here’s the trainer’s description: Review Maxim’s Automotive Product Strategy and Vision. Review QA rules, SFDC process, matrix quoting and other aspects. The issuing BU is: Automotive. For content related questions, contact the trainer: Kent Robinett. NOTE: If you attend the FAE Technology workshop in EMEA or APAC, this topic may be covered during the live training."

[Sales Rep] LED Driver Customer Presentation

Overview of Maxim LED driver products. Focus is on devices for MR16 and AR111, POE lighting and DC Lighting. Discusses design challenges, competition, measuring efficiency and Maxim solution.

[Sales Rep] Analog Signal Chain - Overview (Mandarin)

This course provides a basic overview of the analog signal chain. All the basic elements within the signal chain are discussed as well as the key parameters and specifications associated with each one.

[Sales Rep] RF Basics on RF-Amplifiers and RF-Mixers

This session covers the basics of an RF receive chain. The building blocks and key parameters of an RF receiver are presented. RF amplifiers and RF mixers are discussed in detail. Topics include: Maxim RF solutions, RF units and scales, RF signal chain building blocks, RF amplifiers and RF mixers.

[Sales Rep] Signal Integrity: PCB Layout Example 2 of 3

Third of five modules in the Signal Integrity curriculum. Explanations and recommendations for a good Circuit Board design in respect to Signal Integrity and EMC issues. The speech came from www.Learn.com and was addressing EMC issues; but the rules apply for Signal Integrity in general.

[Sales Rep] FAE Technology Workshop: New 12-Port PIXI - Overview and Applications (Files- Rev1.1)

"Ahead of the New 12-Port PIXI - Overview and Applications workshop: 1. Download and install the 'PIXI_Pre-Install' configuration file found in the Resources section of this training. 2. Download the required files titled 'MAX11311 Demo Madrid'."

[Sales Rep] IC Fab Overview - From Sand to Tested Parts

An introduction to the process of fabrication an integrated circuit. Describes the characteristics of silicon and the steps involved in refining it and producing ingots, developing wafers, how an IC is designed, masks and lithography, IC processing steps and packaging.

[Sales Rep] Maxim Masters 2017: Fuel Gauge (PRE-WORK 2)

This is pre-work for the Maxim Masters 2017 Fuel Gauge course - MAX17055. Please watch the full video.