/
/
/
/
/
回到顶部
MyMaxim 订阅产品详情
主要特征
应用/用途
Parametric specs for High-Speed ADCs (> 5Msps)
| Resolution (bits) | 10 |
| # Input Channels | 1 |
| Sample Rate (Msps) (max) | 105 |
| Data Bus Interface | µP/10 |
| AC Specs (MHz) (@ fIN) | 20 |
| SFDR (dBc) (min) | 72 |
| ENOB (bits) (min) | 9.3 |
| SINAD (dB) | 59 |
| SNR (dB) | 58.5 |
| THD (dB) | -70 |
| DNL (±LSB) | 0.5 |
| INL (±LSB) | 0.75 |
| Package/Pins | TQFP/32 |
| Budgetary Price (See Notes) | 28.01 |
缩小
简化框图
Technical Docs
参量
Parametric specs for High-Speed ADCs (> 5Msps)
| Resolution (bits) | 10 |
| # Input Channels | 1 |
| Sample Rate (Msps) (max) | 105 |
| Data Bus Interface | µP/10 |
| AC Specs (MHz) (@ fIN) | 20 |
| SFDR (dBc) (min) | 72 |
| ENOB (bits) (min) | 9.3 |
| SINAD (dB) | 59 |
| SNR (dB) | 58.5 |
| THD (dB) | -70 |
| DNL (±LSB) | 0.5 |
| INL (±LSB) | 0.75 |
| Package/Pins | TQFP/32 |
| Budgetary Price (See Notes) | 28.01 |
主要特征
- Single 3.3V Operation
- Excellent Dynamic Performance
- 58.5dB SNR at fIN = 20MHz
- 72dBc SFDR at fIN = 20MHz
- Low Power
- 62mA (Normal Operation)
- 5µA (Shutdown Mode)
- Fully Differential Analog Input
- Wide 2VP-P Differential Input Voltage Range
- 400MHz -3dB Input Bandwidth
- On-Chip 2.048V Precision Bandgap Reference
- CMOS-Compatible Three-State Outputs
- 32-Pin TQFP Package
- Evaluation Kit Available (MAX1448 EV Kit)
应用/用途
- 基带与中频数字化
- CCD成像
- 数字机顶盒
- 超声成像
- 视频量化应用
描述
The MAX1449 3.3V, 10-bit analog-to-digital converter (ADC) features a fully differential input, a pipelined 10-stage ADC architecture with wideband track-and-hold (T/H), and digital error correction incorporating a fully differential signal path. The ADC is optimized for lowpower, high-dynamic performance in imaging and digital communications applications. The converter operates from a single 2.7V to 3.6V supply, consuming only 186mW while delivering a 58.5dB (typ) signal-to-noise ratio (SNR) at a 20MHz input frequency. The fully differential input stage has a -3dB 400MHz bandwidth and may be operated with single-ended inputs. In addition to low operating power, the MAX1449 features a 5µA power-down mode for idle periods.
An internal 2.048V precision bandgap reference is used to set the ADC's full-scale range. A flexible reference structure allows the user to supply a buffered, direct, or externally derived reference for applications requiring increased accuracy or a different input voltage range.
See a parametric table of the complete family of pin-compatible, 10-bit high-speed ADCs.
The MAX1449 has parallel, offset binary, CMOS-compatible, three-state outputs that can be operated from 1.7V to 3.6V to allow flexible interfacing. The device is available in a 5mm x 5mm 32-pin TQFP package and is specified over the extended industrial (-40°C to +85°C) temperature range.
An internal 2.048V precision bandgap reference is used to set the ADC's full-scale range. A flexible reference structure allows the user to supply a buffered, direct, or externally derived reference for applications requiring increased accuracy or a different input voltage range.
See a parametric table of the complete family of pin-compatible, 10-bit high-speed ADCs.
The MAX1449 has parallel, offset binary, CMOS-compatible, three-state outputs that can be operated from 1.7V to 3.6V to allow flexible interfacing. The device is available in a 5mm x 5mm 32-pin TQFP package and is specified over the extended industrial (-40°C to +85°C) temperature range.
询价申请