产品详情
主要特征
应用/用途
Resolution (±Counts) | 2000 |
# Input Channels | 1 |
Conv. Rate (ksps) (max) | 0.0025 |
Data Bus | 7-Segment |
Diff/S.E. Input | Diff. Only |
External VREF (V) (min) | 0 |
External VREF (V) (max) | 9 |
Bipolar VIN (±V) (max) | 9 |
Package/Pins | MQFP/44 PLCC/44 |
Budgetary Price (See Notes) | 5.59 |
简化框图
Technical Docs
数据资料 | 低功耗、3 1/2位ADC,带有显示/保持和直接LCD驱动器 | Nov 16, 2012 | |
设计指南 | Delta-Sigma ADCs Replace Integrating ADCs for Panel Meters |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Resolution (±Counts) | 2000 |
# Input Channels | 1 |
Conv. Rate (ksps) (max) | 0.0025 |
Data Bus | 7-Segment |
Diff/S.E. Input | Diff. Only |
External VREF (V) (min) | 0 |
External VREF (V) (max) | 9 |
Bipolar VIN (±V) (max) | 9 |
Package/Pins | MQFP/44 PLCC/44 |
Budgetary Price (See Notes) | 5.59 |
主要特征
- Power Dissipation Guaranteed Less than 1mW–9V Battery Life 3000 Hours Typical
- Hold Pin Allows Indefinite Display Hold
- Guaranteed First Reading Recovery from Overrange
- On-Board Display Drive Capability—No External Circuitry Required
- High-Impedance CMOS Differential Inputs
- Low Noise (< 15µVP-P) Without Hysteresis or Overrange Hangover
- Clock and Reference On-Chip
- Zero Input Gives Zero Reading
- True Polarity Indication for Precision Null Applications
- Key Parameters Guaranteed Over Temperature
应用/用途
- Conductance
- Current
- Material Thickness
- Pressure
- Resistance
- Speed
- Temperature
- Voltage
描述
The MAX136 is a monolithic analog-to-digital converter (ADC) with very high input impedance. It differs from the Maxim ICL7136 in that the MAX136 provides a Hold pin, which makes it possible to hold or "freeze" a reading. The MAX136 directly drives a nonmultiplexed liquid crystal (LCD) display, requiring no external drive circuitry. With minor external component changes, it is pin compatible with the ICL7116 but with significantly reduced power consumption, making the MAX136 a superior device for portable systems.
Versatility and accuracy are inherent features of this ADC. The dual-slope conversion technique automatically rejects interference signals common in industrial environments. True differential inputs allow direct measurements of bridge transducer outputs or load cells. The zero-integrator phase eliminates overrange hangover and hysteresis effects. The MAX136 offers high accuracy by lowering rollover error to less than one count and zero reading drift to less than 1µV/°C.
Technical Docs
数据资料 | 低功耗、3 1/2位ADC,带有显示/保持和直接LCD驱动器 | Nov 16, 2012 | |
设计指南 | Delta-Sigma ADCs Replace Integrating ADCs for Panel Meters |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。