回到顶部

+2.7V至+5.25V、低功耗、4通道、串行、10位ADC,QSOP-16封装

产品详情

主要特征

应用/用途

Parametric specs for Precision ADCs (< 5Msps)
Resolution (bits) (ADC) 10
# Input Channels 4
Conv. Rate (ksps) (max) 133
Data Bus SPI
ADC Architecture SAR
Diff/S.E. Input Both
Internal VREF (V) (nominal) 2.5
External VREF (V) (min) 1
External VREF (V) (max) 5.25
Unipolar VIN (V) (max) 2.5
Bipolar VIN (±V) (max) 1.25
INL (±LSB) 1
Package/Pins PDIP/16
QSOP/16
Budgetary
Price (See Notes)
5.89
查看更多

简化框图

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Precision ADCs (<u><</u> 5Msps)
Resolution (bits) (ADC) 10
# Input Channels 4
Conv. Rate (ksps) (max) 133
Data Bus SPI
ADC Architecture SAR
Diff/S.E. Input Both
Internal VREF (V) (nominal) 2.5
External VREF (V) (min) 1
External VREF (V) (max) 5.25
Unipolar VIN (V) (max) 2.5
Bipolar VIN (±V) (max) 1.25
INL (±LSB) 1
Package/Pins PDIP/16
QSOP/16
Budgetary
Price (See Notes)
5.89

主要特征

  • 4-Channel Single-Ended or 2-Channel Differential Inputs
  • Single +2.7V to +5.25V Operation
  • Internal 2.5V Reference (MAX1248)
  • Low Power:
    • 1.2mA (133ksps, +3V supply)
    • 54µA (1ksps, +3V supply)
    • 1µA (power-down mode)
  • SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface
  • Software-Configurable Unipolar or Bipolar Inputs
  • 16-Pin QSOP Package (same area as 8-pin SO)

应用/用途

  • 电池供电应用
  • 数据采集
  • 医疗仪器
  • 笔输入量化器
  • 便携式数据记录
  • 系统监控

描述

The MAX1248/MAX1249 10-bit data-acquisition systems combine a 4-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. They operate from a single +2.7V to +5.25V supply, and their analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation.

The 4-wire serial interface connects directly to SPI™/ QSPI™ and MICROWIRE™ devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1248/MAX1249 use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions.

The MAX1248 has an internal 2.5V reference, while the MAX1249 requires an external reference. Both parts have a reference-buffer amplifier with a ±1.5% voltage adjustment range.

These devices provide a hard-wired active-low SHDN pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX1248/MAX1249, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under 60µA at reduced sampling rates.

The MAX1248/MAX1249 are available in a 16-pin DIP and a very small QSOP that occupies the same board area as an 8-pin SO.

For 8-channel versions of these devices, see the MAX148/MAX149 datasheet.

简化框图

MAX1248、MAX1249:典型工作电路 MAX1248、MAX1249:典型工作电路 Zoom icon

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心