回到顶部

5V、8通道、串行、10位ADC,3V数字接口

可理想用于10位+5V或±5V模拟、+3V数字供电系统

产品详情

主要特征

Parametric specs for Precision ADCs (< 5Msps)
Resolution (bits) (ADC) 10
# Input Channels 8
Conv. Rate (ksps) (max) 133
Data Bus SPI
ADC Architecture SAR
Diff/S.E. Input Both
Internal VREF (V) (nominal) 4.096
External VREF (V) (min) 2.5
External VREF (V) (max) 5
Unipolar VIN (V) (max) 4.096
Bipolar VIN (±V) (max) 2.048
INL (±LSB) 1
Package/Pins PDIP/20
SSOP/20
Budgetary
Price (See Notes)
6.76
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Precision ADCs (<u><</u> 5Msps)
Resolution (bits) (ADC) 10
# Input Channels 8
Conv. Rate (ksps) (max) 133
Data Bus SPI
ADC Architecture SAR
Diff/S.E. Input Both
Internal VREF (V) (nominal) 4.096
External VREF (V) (min) 2.5
External VREF (V) (max) 5
Unipolar VIN (V) (max) 4.096
Bipolar VIN (±V) (max) 2.048
INL (±LSB) 1
Package/Pins PDIP/20
SSOP/20
Budgetary
Price (See Notes)
6.76

主要特征

  • 8-Channel Single-Ended or 4-Channel Differential Inputs
  • Operates from +5V Single or ±5V Dual Supplies
  • User-Adjustable Output Logic Levels (2.7V to 5.25V)
  • Low Power
    • 1.5mA (Operating Mode)
    • 2µA (Power-Down Mode)
  • Internal Track/Hold, 133kHz Sampling Rate
  • Internal 4.096V Reference
  • SPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface
  • Software-Configurable Unipolar/Bipolar Inputs
  • 20-Pin PDIP/SSOP
  • Pin-Compatible 12-Bit Upgrade: MAX1202

应用/用途

  • 5V/3V混合供电系统
  • 电池供电应用
  • 数据采集
  • 医疗仪器
  • 过程控制

描述

The MAX1204 is a 10-bit data-acquisition system specifically designed for use in applications with mixed +5V (analog) and +3V (digital) supply voltages. It operates with a single +5V analog supply or dual ±5V analog supplies, and combines an 8-channel multiplexer, internal track/hold, and serial interface with high conversion speed and low power consumption.

A 4-wire serial interface connects directly to SPI/MICROWIRE® devices without external logic, and a serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1204 uses either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions. The serial interface operates at up to 2MHz.

The MAX1204 features an internal 4.096V reference and a reference-buffer amplifier that simplifies gain trim. It also has a VL pin that supplies power to the digital outputs. Output logic levels (3V, 3.3V, or 5V) are determined by the value of the voltage applied to this pin.

A hard-wired active-low SHDN pin and two software-selectable power-down modes are provided. Accessing the serial interface automatically powers up the device. A quick turn-on time allows the MAX1204 to be shut down between conversions, enabling the user to optimize supply currents. By customizing power-down between conversions, supply current can drop below 10µA at reduced sampling rates.

The MAX1204 is available in 20-pin SSOP and PDIP packages, and is specified for the commercial and extended temperature ranges.

简化框图

MAX1204:典型工作电路 MAX1204:典型工作电路 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心