回到顶部

5V、8通道、串行、12位ADC,3V数字接口

可理想用于12位+5V或±5V模拟、+3V数字供电系统

产品详情

主要特征

Parametric specs for Precision ADCs (< 5Msps)
Resolution (bits) (ADC) 12
# Input Channels 8
Conv. Rate (ksps) (max) 133
Data Bus SPI
ADC Architecture SAR
Diff/S.E. Input Both
Internal VREF (V) (nominal) 4.096
External VREF (V) (min) 2.5
External VREF (V) (max) 5
Unipolar VIN (V) (max) 4.096
Bipolar VIN (±V) (max) 2.048
INL (±LSB) 1
Package/Pins PDIP/20
SSOP/20
Budgetary
Price (See Notes)
10.37
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Precision ADCs (<u><</u> 5Msps)
Resolution (bits) (ADC) 12
# Input Channels 8
Conv. Rate (ksps) (max) 133
Data Bus SPI
ADC Architecture SAR
Diff/S.E. Input Both
Internal VREF (V) (nominal) 4.096
External VREF (V) (min) 2.5
External VREF (V) (max) 5
Unipolar VIN (V) (max) 4.096
Bipolar VIN (±V) (max) 2.048
INL (±LSB) 1
Package/Pins PDIP/20
SSOP/20
Budgetary
Price (See Notes)
10.37

主要特征

  • 8-Channel Single-Ended or 4-Channel Differential Inputs
  • Operates from Single +5V or Dual ±5V Supplies
  • User-Adjustable Output Logic Levels (2.7V to 5.25V)
  • Low Power:
    • 1.5mA (Operating Mode)
    • 2µA (Power-Down Mode)
  • Internal Track/Hold, 133kHz Sampling Rate
  • Internal 4.096V Reference (MAX1202)
  • SPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface
  • Software-Configurable Unipolar/Bipolar Inputs
  • 20-Pin PDIP/SSOP

应用/用途

  • 5V/3V混合供电系统
  • 电池供电应用
  • 数据采集
  • 高精度过程控制
  • 医疗仪器

描述

The MAX1202/MAX1203 are 12-bit data-acquisition systems specifically designed for use in applications with mixed +5V (analog) and +3V (digital) supply voltages. They operate with a single +5V analog supply or dual ±5V analog supplies, and combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption.

A 4-wire serial interface connects directly to SPI/MICROWIRE® devices without external logic, and a serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1202/MAX1203 use either the internal clock or an external serial-interface clock to perform successive approximation analog-to-digital conversions. The serial interface operates at up to 2MHz.

The MAX1202 features an internal 4.096V reference, while the MAX1203 requires an external reference. Both parts have a reference-buffer amplifier that simplifies gain trim. They also have a VL pin that is the power supply for the digital outputs. Output logic levels (3V, 3.3V, or 5V) are determined by the value of the voltage applied to this pin.

These devices provide a hard-wired active-low SHDN pin and two software-selectable power-down modes. Accessing the serial interface automatically powers up the devices. A quick turn-on time enables the MAX1202/MAX1203 to be shut down between conversions, allowing the user to optimize supply currents. By customizing power-down between conversions, supply current can drop below 10µA at reduced sampling rates.

The MAX1202/MAX1203 are available in 20-pin SSOP and PDIP packages, and are specified for the commercial and extended temperature ranges.

简化框图

MAX1202、MAX1203:典型工作电路 MAX1202、MAX1203:典型工作电路 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心