回到顶部

Evaluation Kit for the MAX2084

产品详情

主要特征

简化框图

Technical Docs

数据资料 Evaluation Kit for the MAX2084 Sep 14, 2017

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

主要特征

  • Allows Fast and Convenient Evaluation of MAX2084, 16-Channel, Ultrasound Receiver
  • MAX2084 EV Kit Allows External Direct Drive or On-Board Regulated Power Supplies (Alternatively)
  • 16-Channel Operation and Data Capture in VGA Mode or CW Doppler Mode
  • Direct Interface with Kintex-7 FPGA Board Using 2 VITA-57 Compliant FPGA Mezzanine Card Connectors From Samtec (One High Pin Count, One Low Pin Count)
  • Low-Power Nap and Shutdown Operating Modes
  • On-Board Single-Ended Analog Input Transformer Circuitry
  • Two On-Board MAX14808 Octal Three-Level/ Quad Five-Level High Voltage Pulsers (Pulser Control To Be Implemented In A Later Version Of Software. See Errata.)
  • Software Selectable TX Digital Pulser Mode, Frequency, and Drive Current Control (Pulser Control to be Implemented in a Later Version of Software. See Errata.)
  • Single-Ended to Differential ADC Clock Configuration
  • On-board, Low Phase Noise, Crystal Oscillator, Clock Sources for ADC clock, CWD LO, and TX Synchronization. External Drive Alternatives Also Available
  • Dual, Fast/Slow (Filtered), DAC-Driven, VGA Gain Control Paths
  • CWD I/Q Measurement Channels with Low-Noise Amplifiers, Fast VGA-CWD Mode Transient Recovery Switches, and 20-bit, 1Msps ADCs
  • Fully Assembled and Tested

应用/用途

  • Echocardiograph Systems
  • Medium and High-Performance Cart-Based Ultrasound Systems
  • Medium and High-Performance Portable Ultrasound Systems
  • Real-Time 4D Ultrasound Systems
  • Shear Wave Elastography Systems

描述

The MAX2084 evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all components necessary to evaluate the performance of the MAX2084 low power, high performance 16-channel ultrasound receiver. The EV kit includes software compatible with the Windows XP®, Windows Vista®, and Windows 7® operating systems. The software provides a simple graphical user interface (GUI) for programming the features of the MAX2084 over a USB 3.0-compliant, super-speed interface. The MAX2084 digital LVDS outputs (VGA mode) are captured and stored using the companion Xilinx KC705 FPGA evaluation board for the Kintex-7 series FPGAs. In CWD mode, the CWD analog outputs are amplified, filtered and digitized using external circuitry, and the data is stored in the same manner. The FPGA board is compatible with Windows XP®, Windows Vista®, and Windows 7®.

简化框图

Technical Docs

数据资料 Evaluation Kit for the MAX2084 Sep 14, 2017

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心