DS1035

3合1、高速硅延迟线


点击查看特定型号的库存状况。

说明

The DS1035 3-in-1 High-Speed Silicon Delay Line has three independent, buffered taps that reproduce logic inputs after delays ranging from 6ns to 30ns at each output. Nominal tolerance is ±1.5ns with additional tolerance of ±2.0ns over temperature and voltage for faster delays (see table). Both leading- and trailing-edge accuracy are specified. Each output can drive up to ten 74LS loads

The DS1035 is similar to the DS1033 but works with 5-volt systems. As a delay line, the DS1035 provides an effective, economical solution to the designer working with the complex timing requirements of mismatched ASICs or other components, or with the strict timing tolerances of increasing system clock rates. Besides fine-tuning system timing, the DS1035 can also function as a pulse width modulator or free-running oscillator. Innovative circuit designs and factory laser or EPROM trimming enhance accuracy without the need for external components, saving cost and space.

关键特性

  • All-silicon timing circuit
  • Three independent, buffered delays
  • Output delay ranges: 6ns to 30ns
  • Initial delay tolerance: +1.5ns
  • Stable and precise over temperature and voltage
  • Leading and trailing edge precision
  • Vapor phase, IR, and wave solderable
  • High-speed, low-power, +5V operation

质量和环境数据

产品可靠性报告: DS1035.pdf 
无铅封装的锡(Sn)晶须报告
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料