回到顶部

Small, Boosted, Digital Input Class-D Amplifier

Integrating a 3X Charge Pump Based Boost Delivers 9W Peak Power and Eliminates the Large and Expensive Inductors

产品详情

主要特征

Parametric specs for Speaker Amplifiers
# Channels 1
Class D
Spkr. Amp. VCC (V) (min) 3
Spkr. Amp. VCC (V) (max) 5.5
Spkr. Amp. ICC (mA) (typ) 1.5
POUT into 8Ω @ 1% THD+N (W) (min) 4.1
POUT into 8Ω @ 10% THD+N (W) (min) 4.85
Spkr. Amp. Half Pwr. THD+N (%) 0.006
SNR (dB) (A- Weighted) 108
PSRR (dB) (min) 60
Package/Pins WLP/24
Budgetary
Price (See Notes)
0
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com

参量

Parametric specs for Speaker Amplifiers
# Channels 1
Class D
Spkr. Amp. VCC (V) (min) 3
Spkr. Amp. VCC (V) (max) 5.5
Spkr. Amp. ICC (mA) (typ) 1.5
POUT into 8Ω @ 1% THD+N (W) (min) 4.1
POUT into 8Ω @ 10% THD+N (W) (min) 4.85
Spkr. Amp. Half Pwr. THD+N (%) 0.006
SNR (dB) (A- Weighted) 108
PSRR (dB) (min) 60
Package/Pins WLP/24
Budgetary
Price (See Notes)
0

主要特征

  • Integrated Capacitive Boost Converter—No Bulky Inductors
  • 3.6W Output Power into 6Ω at VBAT = 3.7V
  • 10mW Total Quiescent Power
  • 3ms Turn-On Time 
  • 80% Efficiency (1.0W into RL = 8Ω, VBAT = 3.7V)
  • 19.8μVRMS Speaker Mode Output Noise 
  • 16.5μVRMS Receiver Mode Output Noise 
  • Low 0.005% THD+N at 1kHz
  • No MCLK Required
  • Sample Rates of 8kHz to 192kHz
  • Supports Left, Right, or (Left/2 + Right/2) Output in I2S and Left-Justified Modes
  • Sophisticated Edge Rate Control Enables Filterless Class-D Outputs
  • Low RF Susceptibility Rejects TDMA Noise from GSM Radios
  • Class-D Switching Frequency Trimmed to 10% for Better EMI Planning
  • Extensive Click-and-Pop Reduction Circuitry
  • Dynamic Headroom Tracking (DHT)
  • Robust Short-Circuit and Thermal Protection
  • Available in Space-Saving Package: 1.468mm x 2.138mm, 24-Bump WLP (0.35mm Pitch) 

应用/用途

  • Smartphones
  • Smart Speakers
  • IoT Devices
  • Tablets

描述

The MAX98380 is a small, mono Class-D audio amplifier featuring an integrated capacitive boost converter. The device implements a tripler charge pump-based boost converter that efficiently delivers up to 4.85W at 1% THD+N into an 8Ω load. The capacitive boost replaces the large and expensive inductor required for an inductive boost with smaller, lower-profile capacitors that reduce the total PCB solution.

Additionally, as the power-supply voltage varies due to declining battery life, an on-chip limiter (DHT) automatically optimizes the headroom available to the Class-D amplifier to maintain consistent distortion and listening levels.

Thermal-foldback protection ensures robust behavior when the thermal limits of the device are reached. When enabled, it automatically reduces the output power when the temperature exceeds a user-specified threshold. This allows for uninterrupted music playback even at high ambient temperatures. Traditional thermal protection is also available in addition to robust overcurrent protection.

The device provides a PCM interface for audio data and a standard I2C interface for control data communication. The PCM interface supports audio playback using I2S, left-justified, and TDM audio data formats. A unique clocking structure eliminates the need for an external master clock for PCM communication. This reduces EMI and possible board coupling issues in addition to reducing the size and pin count.

Active emissions-limiting and edge-rate limiting circuitry greatly reduce EMI. A filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class-D devices and reduces the component count of the solution.

The IC is available in a 0.35mm pitch 24-bump wafer-level package (WLP). It is specified over the extended, -40°C to +85°C temperature range.

简化框图

MAX98380: Simplified Block Diagram MAX98380: Simplified Block Diagram Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com