The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (COM_) pins are not symmetrical. The fault protection feature allows for the analog input to go beyond the plus or minus supplies without the device drawing excessive amounts of current from the analog inputs. When the analog inputs are driven beyond the supply rails when the switch is on, it will sense a fault and turn itself off and the analog switch output will be clamped to the same polarity supply as the input signal and will not go beyond the supply rails. This feature protects any electronic circuitry connected to the output from excessive voltages present on the analog inputs.

The MAX4711/MAX4712/MAX4713 are quad, singlepole/single-throw (SPST) analog switches. The MAX4711 has four normally closed switches (NC), the MAX4712 has four normally open switches (NO), and the MAX4713 has two NO and two NC switches. Switching times are less than 125ns for tON, and less than 80ns for tOFF. These switches operate from a single +2.7V to +11V supply or from dual ±2.7V to ±5.5V supplies. All digital inputs have +0.8V to +2.4V logic thresholds, ensuring both TTL and CMOS logic compatibility when using ±4.5V to ±5.5V or single +4.5V to +11V supplies.
MAX4711、MAX4712、MAX4713:原理框图 MAX4711、MAX4712、MAX4713:原理框图 放大+


  • Fault-Protected Analog Inputs
  • ±12V Fault Protection with Power Off
  • ±7V Fault Protection with ±5V Supplies
  • +12V and -7V Fault Protection with +5V Supply
  • +12V and -9V Fault Protection with +3V Supply
  • Fault-Protected Digital Inputs May Exceed V+ Supply Rail
  • All Switches Off with Power Off
  • Rail-to-Rail Signal Handling
  • Output Clamped to Appropriate Supply Voltages During Fault Condition
  • 25Ω (max) RON at +25°C
  • 1Ω (max) On-Resistance Match Between Channels
  • Single- and Dual-Supply Operation
  • Pin-Compatible with Industry-Standard MAX391/MAX392/MAX393
  • TTL- and CMOS-Compatible Logic Inputs


  • 航空电子
  • 电池供电系统
  • 通信系统
  • 数据采集
  • 工业与过程控制系统
  • 冗余/备份系统
  • 信号路由
  • 测试设备


应用笔记 2854 低电压故障保护
申请可靠性报告: MAX4712 
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >



类型 编号 标题
应用笔记 2854 低电压故障保护