MAX1693H

USB限流型开关,带有故障屏蔽

单通道USB限流开关,带有故障屏蔽,采用µMAX封装


点击查看特定型号的库存状况。

说明

The MAX1693/(MAX1693H)/MAX1694 are current-limited, 60mΩ switches with built-in fault blanking. Their accurate preset current limit of 0.7A to 1.0A makes them ideally suited for USB applications. Their low quiescent supply current (14µA) and shutdown current (1µA) conserve battery power in portable applications. The MAX1693/(MAX1693H)/MAX1694 operate with inputs from +2.7V to +5.5V, making them ideal for both +3V and +5V systems.

A fault signal notifies the microprocessor that the internal current limit has been reached. A 10ms fault-blanking feature allows momentary faults (such as those caused when hot-swapping into a capacitive load) to be ignored, thus preventing false alarms to the host system. This fault blanking also prevents a fault signal from being issued when the device is powering up.

In the MAX1693/(MAX1693H), an output overcurrent condition causes the switch to current limit at 0.7A to 1.0A and active-low FAULT to go low after the 10ms blanking period. When the overcurrent condition is removed, active-low FAULT returns to its high-impedance state. In the MAX1694, any overcurrent longer than 10ms will latch the switch open and set active-low FAULT low. The latch is cleared by cycling the active-low ON input or by powering up the device again. This feature saves power by preventing the device from thermally cycling on and off in case of a persistent short-circuit condition.

The MAX1693/(MAX1693H)/MAX1694 have several safety features to ensure that the USB port is protected. Built-in thermal-overload protection limits power dissipation and junction temperatures. Both devices have accurate internal current-limiting circuitry to protect the input supply against overload. They are available in space-saving 10-pin µMAX® packages.
MAX1693、MAX1693H、MAX1694:典型工作电路 MAX1693、MAX1693H、MAX1694:典型工作电路 放大+

关键特性

  • Accurate Current Limit (0.7A min, 1.0A max)
  • Guaranteed 0.75A Short-Circuit Protection
  • 10ms Internal Fault-Blanking Timeout
  • No Fault Signal During Power-Up
  • Latched active-low FAULT Output Turns Off Power Switch (MAX1694)
  • Thermal Shutdown Protection
  • +2.7V to +5.5V Supply Range
  • 14µA Supply Current
  • Small 10-Pin µMAX Package

应用

  • 电池充电器
  • 坞站
  • 热插拔供电
  • 笔记本电脑
  • 便携式设备
  • USB端口和集线器
Part NumberUSBPower SwitchesCurrent Limit
(mA)
Current Limit
(mA)
Fault IndicatorCurrent Limit Accuracy
(%)
Current Limit Set ByLowest Adj. Setting
(A)
RON
(Ω)
VSUPPLY
(V)
VSUPPLY
(V)
Oper. Temp.
(°C)
Package/PinsBudgetary
Price
minmaxtypminmaxSee Notes
MAX1693 Yes17001000Yes18Preset0.70.062.75.5-40 to +85
UMAX/10
$0.79 @1k
MAX1693H 
SOIC(N)/8
MAX1694 
UMAX/10
查看所有Current Limit and USB Power Switches (82)
Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。

质量和环境数据

申请可靠性报告: MAX1693H 
无铅封装的锡(Sn)晶须报告
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料


MAX14815
Octal 5-Level Pulser with T/R Switch and Embedded Beamforming

  • Optimized for Compact and Portable Applications
  • Flexibility
  • Embedded Digital Resources for Beamforming