回到顶部

USB限流型开关,带有故障屏蔽

单通道USB限流开关,带有故障屏蔽,采用µMAX封装

产品详情

主要特征

Parametric specs for Current Limit and USB Power Switches
Current Limit (mA) (min) 700
Current Limit (mA) (max) 1000
# Power Switches 1
USB Yes
Fault Indicator Yes
Current Limit Accuracy (%) 18
Current Limit Set By Preset
Lowest Adj. Setting (A) 0.7
RON (Ω) (typ) 0.06
VSUPPLY (V) (min) 2.7
VSUPPLY (V) (max) 5.5
Oper. Temp. (°C) -40 to +85
Package/Pins UMAX/10
Budgetary
Price (See Notes)
0.88
缩小

简化框图

Technical Docs

数据资料 USB限流型开关,带有故障屏蔽 Feb 22, 2002

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Current Limit and USB Power Switches
Current Limit (mA) (min) 700
Current Limit (mA) (max) 1000
# Power Switches 1
USB Yes
Fault Indicator Yes
Current Limit Accuracy (%) 18
Current Limit Set By Preset
Lowest Adj. Setting (A) 0.7
RON (Ω) (typ) 0.06
VSUPPLY (V) (min) 2.7
VSUPPLY (V) (max) 5.5
Oper. Temp. (°C) -40 to +85
Package/Pins UMAX/10
Budgetary
Price (See Notes)
0.88

主要特征

  • Accurate Current Limit (0.7A min, 1.0A max)
  • Guaranteed 0.75A Short-Circuit Protection
  • 10ms Internal Fault-Blanking Timeout
  • No Fault Signal During Power-Up
  • Latched active-low FAULT Output Turns Off Power Switch (MAX1694)
  • Thermal Shutdown Protection
  • +2.7V to +5.5V Supply Range
  • 14µA Supply Current
  • Small 10-Pin µMAX Package

应用/用途

  • 电池充电器
  • 坞站
  • 热插拔供电
  • 笔记本电脑
  • 便携式设备
  • USB端口和集线器

描述

The MAX1693/(MAX1693H)/MAX1694 are current-limited, 60mΩ switches with built-in fault blanking. Their accurate preset current limit of 0.7A to 1.0A makes them ideally suited for USB applications. Their low quiescent supply current (14µA) and shutdown current (1µA) conserve battery power in portable applications. The MAX1693/(MAX1693H)/MAX1694 operate with inputs from +2.7V to +5.5V, making them ideal for both +3V and +5V systems.

A fault signal notifies the microprocessor that the internal current limit has been reached. A 10ms fault-blanking feature allows momentary faults (such as those caused when hot-swapping into a capacitive load) to be ignored, thus preventing false alarms to the host system. This fault blanking also prevents a fault signal from being issued when the device is powering up.

In the MAX1693/(MAX1693H), an output overcurrent condition causes the switch to current limit at 0.7A to 1.0A and active-low FAULT to go low after the 10ms blanking period. When the overcurrent condition is removed, active-low FAULT returns to its high-impedance state. In the MAX1694, any overcurrent longer than 10ms will latch the switch open and set active-low FAULT low. The latch is cleared by cycling the active-low ON input or by powering up the device again. This feature saves power by preventing the device from thermally cycling on and off in case of a persistent short-circuit condition.

The MAX1693/(MAX1693H)/MAX1694 have several safety features to ensure that the USB port is protected. Built-in thermal-overload protection limits power dissipation and junction temperatures. Both devices have accurate internal current-limiting circuitry to protect the input supply against overload. They are available in space-saving 10-pin µMAX® packages.

简化框图

MAX1693、MAX1693H、MAX1694:典型工作电路 MAX1693、MAX1693H、MAX1694:典型工作电路 Zoom icon

Technical Docs

数据资料 USB限流型开关,带有故障屏蔽 Feb 22, 2002

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心