回到顶部
Maxim Confidential 
MyMaxim 订阅产品详情
主要特征
应用/用途
Parametric specs for Active Filters
| Filter Type | Lowpass |
| Filter Sections | 1 |
| Order Per Filter Section | 8 |
| Highest Cutoff (kHz) (min) | 50 |
| Lowest Cutoff (Hz) (max) | 0.1 |
| Filter Class | Switched Cap |
| Filter Characteristic | Elliptic |
| Program Method | Clock |
| Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
| Package/Pins | CDIP/8 PDIP/8 SOIC (N)/8 SOIC (W)/16 |
| Budgetary Price (See Notes) | 4.91 |
查看更多
简化框图
技术文档
| 数据资料 | 八阶、低通、椭圆函数、开关电容滤波器 | Aug 07, 2008 | |
| 应用笔记 | Locked-Sync Sine Generator Covers Three Decades with Low Distortion |
参量
Parametric specs for Active Filters
| Filter Type | Lowpass |
| Filter Sections | 1 |
| Order Per Filter Section | 8 |
| Highest Cutoff (kHz) (min) | 50 |
| Lowest Cutoff (Hz) (max) | 0.1 |
| Filter Class | Switched Cap |
| Filter Characteristic | Elliptic |
| Program Method | Clock |
| Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
| Package/Pins | CDIP/8 PDIP/8 SOIC (N)/8 SOIC (W)/16 |
| Budgetary Price (See Notes) | 4.91 |
主要特征
- 8th-Order Lowpass Elliptic Filters
- Clock-Tunable Corner-Frequency Range:
- 0.1Hz to 25kHz (MAX293/MAX294)
- 0.1Hz to 50kHz (MAX297)
- No External Resistors or Capacitors Required
- Internal or External Clock
- Clock to Corner Frequency Ratio
- 100:1 (MAX293/MAX294)
- 50:1 (MAX297)
- Operate with a Single +5V Supply or Dual ±5V Supplies
- Uncommitted Op Amp for Anti-Aliasing or Clock-Noise Filtering
- 8-Pin DIP and 16-Pin Wide SO Packages
应用/用途
- 抗混叠
- DAC后置滤波
- 数据采集系统
- 语音/数据信号滤波
描述
The MAX293/MAX294/MAX297 are easy-to-use, 8th-order, lowpass, elliptic, switched-capacitor filters that can be set up with corner frequencies from 0.1Hz to 25kHz (MAX293/MAX294) or from 0.1Hz to 50kHz (MAX297).
The MAX293/MAX297's 1.5 transition ratio provides sharp rolloff and -80dB of stopband rejection. The MAX294's 1.2 transition ratio provides the steepest rolloff and -58dB of stopband rejection. All three filters have fixed responses, so the design task is limited to selecting the clock frequency that controls the filter's corner frequency.
An external capacitor is used to generate a clock using the internal oscillator, or an external clock signal can be used. An uncommitted op amp (noninverting input grounded) is provided for building a continuous-time lowpass filter for post-filtering or anti-aliasing. Steep rolloff and high order make these filters ideal for anti-aliasing applications that require maximum bandwidth, and for communication applications that require filtering signals in close proximity within the frequency domain.
The MAX293/MAX294/MAX297 are available in 8-pin DIP and 16-pin wide SO packages, delivering aggressive performance from a tiny area.
The MAX293/MAX297's 1.5 transition ratio provides sharp rolloff and -80dB of stopband rejection. The MAX294's 1.2 transition ratio provides the steepest rolloff and -58dB of stopband rejection. All three filters have fixed responses, so the design task is limited to selecting the clock frequency that controls the filter's corner frequency.
An external capacitor is used to generate a clock using the internal oscillator, or an external clock signal can be used. An uncommitted op amp (noninverting input grounded) is provided for building a continuous-time lowpass filter for post-filtering or anti-aliasing. Steep rolloff and high order make these filters ideal for anti-aliasing applications that require maximum bandwidth, and for communication applications that require filtering signals in close proximity within the frequency domain.
The MAX293/MAX294/MAX297 are available in 8-pin DIP and 16-pin wide SO packages, delivering aggressive performance from a tiny area.
技术文档
| 数据资料 | 八阶、低通、椭圆函数、开关电容滤波器 | Aug 07, 2008 | |
| 应用笔记 | Locked-Sync Sine Generator Covers Three Decades with Low Distortion |
询价申请