回到顶部

八阶、低通、椭圆函数、开关电容滤波器

低功耗应用请参考MAX7400/MAX7403/MAX7404/MAX7407

产品详情

主要特征

Parametric specs for Active Filters
Filter Type Lowpass
Filter Sections 1
Order Per Filter Section 8
Highest Cutoff (kHz) (min) 25
Lowest Cutoff (Hz) (max) 0.1
Filter Class Switched Cap
Filter Characteristic Elliptic
Program Method Clock
Oper. Temp. (°C) -55 to +125
-40 to +85
0 to +70
Package/Pins PDIP/8
SOIC (N)/8
SOIC (W)/16
Budgetary
Price (See Notes)
5.27
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com

参量

Parametric specs for Active Filters
Filter Type Lowpass
Filter Sections 1
Order Per Filter Section 8
Highest Cutoff (kHz) (min) 25
Lowest Cutoff (Hz) (max) 0.1
Filter Class Switched Cap
Filter Characteristic Elliptic
Program Method Clock
Oper. Temp. (°C) -55 to +125
-40 to +85
0 to +70
Package/Pins PDIP/8
SOIC (N)/8
SOIC (W)/16
Budgetary
Price (See Notes)
5.27

主要特征

  • 8th-Order Lowpass Elliptic Filters
  • Clock-Tunable Corner-Frequency Range:
    • 0.1Hz to 25kHz (MAX293/MAX294)
    • 0.1Hz to 50kHz (MAX297)
  • No External Resistors or Capacitors Required
  • Internal or External Clock
  • Clock to Corner Frequency Ratio
    • 100:1 (MAX293/MAX294)
    • 50:1 (MAX297)
  • Operate with a Single +5V Supply or Dual ±5V Supplies
  • Uncommitted Op Amp for Anti-Aliasing or Clock-Noise Filtering
  • 8-Pin DIP and 16-Pin Wide SO Packages

应用/用途

  • 抗混叠
  • DAC后置滤波
  • 数据采集系统
  • 语音/数据信号滤波

描述

The MAX293/MAX294/MAX297 are easy-to-use, 8th-order, lowpass, elliptic, switched-capacitor filters that can be set up with corner frequencies from 0.1Hz to 25kHz (MAX293/MAX294) or from 0.1Hz to 50kHz (MAX297).

The MAX293/MAX297's 1.5 transition ratio provides sharp rolloff and -80dB of stopband rejection. The MAX294's 1.2 transition ratio provides the steepest rolloff and -58dB of stopband rejection. All three filters have fixed responses, so the design task is limited to selecting the clock frequency that controls the filter's corner frequency.

An external capacitor is used to generate a clock using the internal oscillator, or an external clock signal can be used. An uncommitted op amp (noninverting input grounded) is provided for building a continuous-time lowpass filter for post-filtering or anti-aliasing. Steep rolloff and high order make these filters ideal for anti-aliasing applications that require maximum bandwidth, and for communication applications that require filtering signals in close proximity within the frequency domain.

The MAX293/MAX294/MAX297 are available in 8-pin DIP and 16-pin wide SO packages, delivering aggressive performance from a tiny area.

简化框图

MAX293、MAX294、MAX297:典型工作电路 MAX293、MAX294、MAX297:典型工作电路 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com