回到顶部
产品详情
主要特征
应用/用途
简化框图
Technical Docs
数据资料 | 两通道、三/四路、RGB视频开关及缓冲器 | Jun 01, 1994 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
主要特征
- 100MHz Unity-Gain Bandwidth
- 90MHz Bandwidth with 2V/V Gain
- 0.01%/0.03° Differential Gain/Phase Error
- Drives 50Ω and 75Ω Back-Terminated Cable Directly
- Wide Output Swing:
- ±2V into 75Ω
- ±2.5V into 150Ω
- 300V/µs Slew Rate (2V/V gain)
- 20ns Channel Switching Time
- Logic Disable Mode:
- High-Z Outputs
- Reduced Power Consumption
- Outputs May Be Paralleled for Larger Networks
- 5pF Input Capacitance (channel on or off)
应用/用途
- 广播级彩色信号多路复用
- 同轴电缆线驱动器
- RGB彩色视频重叠编辑器
- RGB彩色视频安全系统
- RGB医学成像
- RGB复用
描述
The MAX463–MAX470 series of two-channel, triple/quad buffered video switches and video buffers combines high-accuracy, unity-gain-stable amplifiers with high-performance video switches. Fast switching time and low differential gain and phase error make this series of switches and buffers ideal for all video applications. The devices are all specified for ±5V supply operation with inputs and outputs as high as ±2.5V when driving 150Ω loads (75Ω back-terminated cable).
Input capacitance is typically only 5pF, and channel-to-channel crosstalk is better than 60dB, accomplished by surrounding all inputs with AC ground pins. The on-board amplifiers feature a 200V/µs slew rate (300V/µs for AV = 2V/V amplifiers), and a bandwidth of 100MHz (90MHz for AV = 2V/V buffers). Channel selection is controlled by a single TTL-compatible input pin or by a microprocessor interface, and channel switch time is only 20ns.
For design flexibility, devices are offered with buffer-amplifier gains of 1V/V or 2V/V for 75Ω back-terminated applications. Output amplifiers have a guaranteed output swing of ±2V into 75Ω.
Input capacitance is typically only 5pF, and channel-to-channel crosstalk is better than 60dB, accomplished by surrounding all inputs with AC ground pins. The on-board amplifiers feature a 200V/µs slew rate (300V/µs for AV = 2V/V amplifiers), and a bandwidth of 100MHz (90MHz for AV = 2V/V buffers). Channel selection is controlled by a single TTL-compatible input pin or by a microprocessor interface, and channel switch time is only 20ns.
For design flexibility, devices are offered with buffer-amplifier gains of 1V/V or 2V/V for 75Ω back-terminated applications. Output amplifiers have a guaranteed output swing of ±2V into 75Ω.
Technical Docs
数据资料 | 两通道、三/四路、RGB视频开关及缓冲器 | Jun 01, 1994 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。