The MAX458/MAX459 are crosspoint switches with eight input channels and four high-speed, buffered output channels. The MAX458 output buffer is configured with a gain of one, while the MAX459 buffer has a gain of two. In each device, any one of eight input lines can be connected to any of four output amplifiers. The output buffers are capable of driving loads of 75Ω.

Data interface can be accomplished by either a 16-bit serial or a 6-bit parallel connection. In the serial mode, the MAX458/MAX459 are SPI™, QSPI™, and Microwire™ compatible. In parallel mode, the MAX458/MAX459 are compatible with most microprocessor buses. Three-state amplifier output capability makes it possible to multiplex MAX458/MAX459s to form larger switch networks. The output buffers can be disabled individually or the entire device can be shut down to conserve power.


  • 100MHz Unity-Gain Bandwidth
  • 300V/µs Slew Rate
  • Low 0.05° Differential Phase Error
  • Low 0.01% Differential Gain Error
  • Directly Drives 75Ω Cables
  • Fast 60ns Switching Time
  • High-Z Amplifier Output Capability
  • Shutdown Capability
  • 16-Bit Serial and 6-Bit Parallel Address Modes
  • 40-Pin DIP and 44-Pin PLCC Packages


  • 视频编辑
  • 视频安全系统
  • 视频测试设备
申请可靠性报告: MAX459 
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >



Quad Transimpedance Amplifier with Input Current Clamp and Multiplexer for LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available Upon Request)
  • Internal Multiplexer

Dual 280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

  • Fast Propagation Delay: 280ps, Typ
  • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
  • Supply Voltage 2.7V to 3.6V

类型 编号 标题
评估板1265MAX459EVKIT MAX459评估板