回到顶部
产品详情
主要特征
应用/用途
简化框图
Technical Docs
数据资料 | 8x4视频交叉点开关,带有缓冲器 | Nov 16, 2000 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
主要特征
- 100MHz Unity-Gain Bandwidth
- 300V/µs Slew Rate
- Low 0.05° Differential Phase Error
- Low 0.01% Differential Gain Error
- Directly Drives 75Ω Cables
- Fast 60ns Switching Time
- High-Z Amplifier Output Capability
- Shutdown Capability
- 16-Bit Serial and 6-Bit Parallel Address Modes
- 40-Pin DIP and 44-Pin PLCC Packages
应用/用途
- 视频编辑
- 视频安全系统
- 视频测试设备
描述
The MAX458/MAX459 are crosspoint switches with eight input channels and four high-speed, buffered output channels. The MAX458 output buffer is configured with a gain of one, while the MAX459 buffer has a gain of two. In each device, any one of eight input lines can be connected to any of four output amplifiers. The output buffers are capable of driving loads of 75Ω.
Data interface can be accomplished by either a 16-bit serial or a 6-bit parallel connection. In the serial mode, the MAX458/MAX459 are SPI™, QSPI™, and Microwire™ compatible. In parallel mode, the MAX458/MAX459 are compatible with most microprocessor buses. Three-state amplifier output capability makes it possible to multiplex MAX458/MAX459s to form larger switch networks. The output buffers can be disabled individually or the entire device can be shut down to conserve power.
Data interface can be accomplished by either a 16-bit serial or a 6-bit parallel connection. In the serial mode, the MAX458/MAX459 are SPI™, QSPI™, and Microwire™ compatible. In parallel mode, the MAX458/MAX459 are compatible with most microprocessor buses. Three-state amplifier output capability makes it possible to multiplex MAX458/MAX459s to form larger switch networks. The output buffers can be disabled individually or the entire device can be shut down to conserve power.
简化框图
Technical Docs
数据资料 | 8x4视频交叉点开关,带有缓冲器 | Nov 16, 2000 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。