回到顶部
产品详情
Parametric specs for Video/Wideband Line Drivers/Receivers
Functions | Driver |
BW (MHz) (@ -3dB) | 330 |
VSUPPLY (V) | -5 5 |
ICC (mA) (typ) | 46 |
IOUT (mA) (min) | 90 |
Slew Rate (V/µs) | 4300 |
Diff. Phase/ Gain (deg/%) | 0.02/0.01 |
AV (V/V) | 2 |
BW (MHz) (0.1dB min) | 40 |
Package/Pins | SOIC (N)/16 |
Oper. Temp. (°C) | -40 to +85 |
Budgetary Price (See Notes) | 3.28 |
缩小
简化框图
Technical Docs
数据资料 | 6500V/µs、宽带、高输出电流、单端至差分线驱动器,带有使能端 | Dec 01, 2000 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Parametric specs for Video/Wideband Line Drivers/Receivers
Functions | Driver |
BW (MHz) (@ -3dB) | 330 |
VSUPPLY (V) | -5 5 |
ICC (mA) (typ) | 46 |
IOUT (mA) (min) | 90 |
Slew Rate (V/µs) | 4300 |
Diff. Phase/ Gain (deg/%) | 0.02/0.01 |
AV (V/V) | 2 |
BW (MHz) (0.1dB min) | 40 |
Package/Pins | SOIC (N)/16 |
Oper. Temp. (°C) | -40 to +85 |
Budgetary Price (See Notes) | 3.28 |
主要特征
- 6500V/µs Slew Rate (MAX4449)
- Small-Signal Bandwidth
- 430MHz (MAX4447)
- 330MHz (MAX4448)
- 400MHz (MAX4449)
- 200MHz 0.1dB Gain Flatness (MAX4447)
- 130mA Output Drive Current
- +2V/V Internally Fixed Gain (MAX4447)
- External Gain Selection
- >+2V/V (MAX4448)
- >+5V/V (MAX4449)
- -78dB SFDR at 100kHz
- Low Differential Gain/Phase: 0.01%/0.02°
- Ultra-Low Noise: 23nV per root-Hz at fIN = 1MHz
- 8ns Settling Time to 0.1%
应用/用途
- 同轴电缆至双绞线转换器
- 差分ADC驱动器
- 差分线驱动器
- 差分脉冲放大器
- 高速差分发送器
- 单端至差分转换器
- 视频和射频信号处理与传输
- xDSL应用
描述
The MAX4447/MAX4448/MAX4449 single-ended-to-differential line drivers are designed for high-speed communications. Using current feedback for greater bandwidth, these devices deliver full-power bandwidths up to 405MHz and feature slew rates as high as 6500V/µs. The MAX4447 has a fixed gain of +2V/V and a small-signal bandwidth of 430MHz. The MAX4448/MAX4449 have small-signal bandwidths of 330MHz and 400MHz, respectively, and are internally compensated for minimum gain configurations of +2V/V and +5V/V, respectively. For greater design flexibility, the MAX4448/MAX4449 allow for variable gain selection using external gain-setting resistors. A low-power enable mode reduces current consumption below 5.5mA and places the outputs in a high-impedance state.
The MAX4447/MAX4448/MAX4449 can deliver differential output swings of ±6.2V from ±5V supplies with a 50Ω load. Excellent differential gain/phase and noise specifications make these amplifiers ideal for a wide variety of video and RF signal-processing and transmission applications.
The MAX4447/MAX4448/MAX4449 can deliver differential output swings of ±6.2V from ±5V supplies with a 50Ω load. Excellent differential gain/phase and noise specifications make these amplifiers ideal for a wide variety of video and RF signal-processing and transmission applications.
Technical Docs
数据资料 | 6500V/µs、宽带、高输出电流、单端至差分线驱动器,带有使能端 | Dec 01, 2000 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。