回到顶部
产品详情
主要特征
应用/用途
简化框图
Technical Docs
数据资料 | 350MHz/250MHz、2通道视频多路复用器-放大器 | Mar 10, 2003 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
主要特征
- Excellent Video Specifications:
- 0.1dB Gain Flatness to 130MHz
- 0.01%/0.01° Differential Gain/Phase Error
- High Speed:
- 350MHz -3dB Bandwidth (MAX4158/4159)
- 250MHz -3dB Bandwidth (MAX4258/4259)
- 700V/µs Slew Rate (MAX4158/4159)
- 1000V/µs Slew Rate (MAX4258/4259)
- 20ns Settling Time to 0.1%
- Fast Switching:
- 20ns Channel-Switching Time
- <70mV Switching Transient
- Low Power: 100mW
- Directly Drive 75Ω or 50Ω Cables
- High Output Current Drive: >70mA
- Address Latch and High-Z Output Disable
应用/用途
- 广播级视频
- 同轴电缆驱动器
- 高清晰度电视(HDTV)
- 高速信号处理
- 多媒体产品
- 像素切换
- 视频交叉开关
- 视频信号多路复用
- 工作站
描述
The MAX4158/MAX4159/MAX4258/MAX4259 are wideband, 2-channel, noninverting video amplifiers with input multiplexing, capable of driving ±2.5V signals into 50Ω or 75Ω loads. These devices are current-mode feedback amplifiers; gain is set by external feedback resistors. The MAX4158/MAX4159 are optimized for unity gain (0dB) with a -3dB bandwidth of 350MHz. The MAX4258/MAX4259 are optimized for gains of two (6dB) or more with a 250MHz -3dB bandwidth. These devices have low (0.01%/0.01°) differential gain and phase errors, and operate from ±5V supplies.
These devices are ideal for use in broadcast and graphics video systems because of their low, 2pF input capacitance, channel-to-channel switching time of only 20ns, and wide, 130MHz 0.1dB bandwidth. In addition, the combination of ultra-high speed and low power makes them suitable for use in general-purpose high-speed applications, such as medical imaging, industrial instrumentation, and communications systems.
The MAX4159/MAX4259 have address latching and high-impedance output disabling, allowing them to be incorporated into large switching arrays. They are available in 14-pin SO and 16-pin QSOP packages. The MAX4158/MAX4258 have no address latching or output disabling, but are available in space-saving 8-pin µMAX® and SO packages.
These devices are ideal for use in broadcast and graphics video systems because of their low, 2pF input capacitance, channel-to-channel switching time of only 20ns, and wide, 130MHz 0.1dB bandwidth. In addition, the combination of ultra-high speed and low power makes them suitable for use in general-purpose high-speed applications, such as medical imaging, industrial instrumentation, and communications systems.
The MAX4159/MAX4259 have address latching and high-impedance output disabling, allowing them to be incorporated into large switching arrays. They are available in 14-pin SO and 16-pin QSOP packages. The MAX4158/MAX4258 have no address latching or output disabling, but are available in space-saving 8-pin µMAX® and SO packages.
Technical Docs
数据资料 | 350MHz/250MHz、2通道视频多路复用器-放大器 | Mar 10, 2003 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。