回到顶部
MyMaxim 订阅产品详情
主要特征
应用/用途
简化框图
Technical Docs
| 数据资料 | 1路输入/6路输出、视频分配放大器 | Aug 02, 2002 | |
| 设计指南 | Driving Video Lines |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
主要特征
- Fixed Gain of 2V/V (MAX4135) External Gain Set (MAX4136)
- High Speed:
- 185MHz -3dB Bandwidth (MAX4135)
- 140MHz -3dB Bandwidth (MAX4136)
- 1000V/µs Slew Rate
- High Full-Power Bandwidths (VOUT = 2VP-P):
- 185MHz (MAX4135)
- 140MHz (MAX4136)
- 0.1dB Gain Flatness to 40MHz
- Low Differential Gain/Phase Error: 0.10%/0.02°
- High-Impedance Output Disable
应用/用途
- 复合视频前置放大器
- 高分辨率RGB CRT监视器
- 高速模拟总线驱动器
- 射频信号处理
- 视频切换与分配
描述
The MAX4135/MAX4136 are 1-input/6-output voltage-feedback amplifiers that combine high speed with fast switching for video distribution applications. The MAX4135 is internally set for a closed-loop gain of 2V/V, while the MAX4136 can be externally set for gains of 2V/V or greater.
The MAX4135 achieves a -3dB bandwidth of 185MHz, with 0.1dB gain flatness to 40MHz. The MAX4136's -3dB bandwidth is 140MHz. Both devices deliver a 1000V/µs slew rate, as well as exceptional full-power bandwidths of 185MHz and 140MHz, respectively.
A 25ns channel switching time enables rapid multiplexing for picture-in-picture applications, yet maintains a high off-isolation of 75dB and all-hostile crosstalk of -50dB (f = 30MHz). The MAX4135/MAX4136's on-board logic selects any combination of the six signal outputs. Each output is capable of swinging ±2V and delivering 65mA.
For applications that require a 1-input/4-output distribution amplifier, see the MAX4137/MAX4138 data sheet.
The MAX4135 achieves a -3dB bandwidth of 185MHz, with 0.1dB gain flatness to 40MHz. The MAX4136's -3dB bandwidth is 140MHz. Both devices deliver a 1000V/µs slew rate, as well as exceptional full-power bandwidths of 185MHz and 140MHz, respectively.
A 25ns channel switching time enables rapid multiplexing for picture-in-picture applications, yet maintains a high off-isolation of 75dB and all-hostile crosstalk of -50dB (f = 30MHz). The MAX4135/MAX4136's on-board logic selects any combination of the six signal outputs. Each output is capable of swinging ±2V and delivering 65mA.
For applications that require a 1-input/4-output distribution amplifier, see the MAX4137/MAX4138 data sheet.
简化框图
Technical Docs
| 数据资料 | 1路输入/6路输出、视频分配放大器 | Aug 02, 2002 | |
| 设计指南 | Driving Video Lines |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
询价申请