回到顶部

单、双、四路、1.2µA最大静态电流、单电源运算放大器

产品详情

主要特征

应用/用途

Parametric specs for Operational Amplifiers
Unity Gain BW (MHz) (typ) 0.004
Input IBIAS (nA) (max) 0.01
VOS (µV) (max) 500
VSUPPLY (Total) (V) (min) 2.5
VSUPPLY (Total) (V) (max) 10
# Amplifiers 1
Rail to Rail Output Only
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes)
2.73
查看更多

简化框图

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Operational Amplifiers
Unity Gain BW (MHz) (typ) 0.004
Input IBIAS (nA) (max) 0.01
VOS (µV) (max) 500
VSUPPLY (Total) (V) (min) 2.5
VSUPPLY (Total) (V) (max) 10
# Amplifiers 1
Rail to Rail Output Only
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes)
2.73

主要特征

  • 1.2µA Max Quiescent Current per Amplifier
  • +2.5V to +10V Single-Supply Range
  • 500µV Max Offset Voltage (MAX406A/MAX409A)
  • < 0.1pA Typical Input Bias Current
  • Output Swings Rail-to-Rail
  • Input Voltage Range Includes Negative Rail

应用/用途

  • 电池供电系统
  • 无绳电话
  • 静电计放大器
  • 血糖表
  • GPS方案
  • 安全系统
  • IP摄像机
  • 医疗仪器
  • 面板表
  • pH计
  • 光电二极管前置放大器
  • 电表
  • 可编程逻辑控制器(PLC)

描述

The MAX406/MAX407/MAX409/MAX417–MAX419 are single, dual, and quad low-voltage, micropower, precision op amps designed for battery-operated systems. They feature a supply current of less than 1.2µA per amplifier that is relatively constant over the entire supply range, which represents a 15 to 20 times improvement over industry-standard micropower op amps. A unique output stage enables these op amps to operate at ultra-low supply current while maintaining linearity under loaded conditions. In addition, the output is capable of sourcing 1.8mA when powered by a 9V battery.

The common-mode input-voltage range extends from the negative rail to within 1.1V of the positive supply (for the singes, 1.2V for the duals and quads), and the output stage swings rail-to-rail. The entire family is designed to maintain good DC characteristics over the operating temperature range, minimizing the input referred errors.

The MAX406 is a single op amp with two modes of operation: compensated mode and decompensated mode. Floating BW (pin 8) or connecting it to V- internally compensates the amplifier. In this mode, the MAX406 is unity-gain stable with a 5V/ms typical slew rate and an 8kHz gain bandwidth. Connecting BW to V+ puts the MAX406 into decompensated mode with a 20V/ms typical slew rate and a 40kHz gain bandwidth (AVCL ≥ 2V/V).

The dual MAX407 and quad MAX418 are internally compensated to be unity-gain stable. The MAX409/MAX417/MAX419 single/dual/quad op amps feature 150kHz typical bandwidth, 75V/ms slew rate, and stability for gains of 10V/V or greater.

简化框图

MAX406、MAX407、MAX409、MAX417、MAX418、MAX419:典型工作电路 MAX406、MAX407、MAX409、MAX417、MAX418、MAX419:典型工作电路 Zoom icon

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心