›

MAX4041

单/双/四路、低成本、SOT23封装、微功耗、满摆幅输入/输出运算放大器

概述

说明

The MAX4040–MAX4044 family of micropower op amps operates from a single +2.4V to +5.5V supply or dual ±1.2V to ±2.75V supplies and have rail-to-rail input and output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current per amplifier. The MAX4041/MAX4043 have a low-power shutdown mode that reduces supply current to less than 1µA and forces the output into a high-impedance state. The combination of low-voltage operation, rail-to-rail inputs and outputs, and ultra-low power consumption makes these devices ideal for any portable/battery-powered system.

These amplifiers have outputs that typically swing to within 10mV of the rails with a 100kΩ load. Rail-to-rail input and output characteristics allow the full power-supply voltage to be used for signal range. The combination of low input offset voltage, low input bias current, and high open-loop gain makes them suitable for low-power/ low-voltage precision applications.

The MAX4040 is offered in a space-saving 5-pin SOT23 package. All specifications are guaranteed over the -40°C to +85°C extended temperature range.

MAX4040、MAX4041、MAX4042、MAX4043、MAX4044：引脚配置

MAX404、MAX4041、MAX4042、MAX4043、MAX4044：引脚配置

放大+

关键特性

Single-Supply Operation Down to +2.4V
Ultra-Low Power Consumption:
- 10µA Supply Current per Amplifier
- 1µA Shutdown Mode (MAX4041/MAX4043)
Rail-to-Rail Input Common-Mode Range
Outputs Swing Rail-to-Rail
No Phase Reversal for Overdriven Inputs
200µV Input Offset Voltage
Unity-Gain Stable for Capacitive Loads up to 200pF
90kHz Gain-Bandwidth Product
Available in Space-Saving 5-Pin SOT23 and 8-Pin µMAX® Packages