回到顶部
MyMaxim 订阅产品详情
主要特征
应用/用途
Parametric specs for Operational Amplifiers
| Unity Gain BW (MHz) (typ) | 0.044 |
| Input IBIAS (nA) (max) | 0.05 |
| VOS (µV) (max) | 2000 |
| VSUPPLY (Total) (V) (min) | 2 |
| VSUPPLY (Total) (V) (max) | 16 |
| # Amplifiers | 4 |
| Package/Pins | CDIP/14 PDIP/14 |
| Budgetary Price (See Notes) | 0 |
缩小
简化框图
Technical Docs
| 数据资料 | 单/双/四路运算放大器 | Jul 29, 2021 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
参量
Parametric specs for Operational Amplifiers
| Unity Gain BW (MHz) (typ) | 0.044 |
| Input IBIAS (nA) (max) | 0.05 |
| VOS (µV) (max) | 2000 |
| VSUPPLY (Total) (V) (min) | 2 |
| VSUPPLY (Total) (V) (max) | 16 |
| # Amplifiers | 4 |
| Package/Pins | CDIP/14 PDIP/14 |
| Budgetary Price (See Notes) | 0 |
主要特征
- Pin-for-Pin Second Source
- 1pA Typical Bias Current—4nA (max) at +125°C
- ±1V to ±8V Wide Supply Voltage Range
- Industry-Standard Pinouts
- Programmable Quiescent Currents of 10µA, 100µA, and 1000µA
- Monolithic, Low-Power CMOS Design
应用/用途
- 电池供电仪表
- 助听器与麦克风放大器
- 具有较长时间常数的积分器
- 低失效率采样/保持放大器
- 低频有源滤波器
- 低泄漏放大器
- 皮安级安培计
描述
The ICL761X–ICL764X family of monolithic CMOS op amps combine ultra-low input current with low-power operation over a wide supply voltage range. With pinselectable quiescent currents of 10µA, 100µA, or 1000µA per amplifier, these op amps will operate from ±1V to ±8V power supplies, or from single supplies from 2V to 16V. The CMOS outputs swing to within millivolts of the supply voltages.
The ultra-low bias current of 1pA makes this family of op amps ideal for long time constant integrators, picoammeters, low droop rate sample/hold amplifiers and other applications where input bias and offset currents are critical. A low noise current of 0.01pA
and an input impedance of 1012Ω ensure optimum performance with very high source impedances in such applications as pH meters and photodiode amplifiers.
The ultra-low bias current of 1pA makes this family of op amps ideal for long time constant integrators, picoammeters, low droop rate sample/hold amplifiers and other applications where input bias and offset currents are critical. A low noise current of 0.01pA
and an input impedance of 1012Ω ensure optimum performance with very high source impedances in such applications as pH meters and photodiode amplifiers. Technical Docs
| 数据资料 | 单/双/四路运算放大器 | Jul 29, 2021 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
询价申请