Setting Up the IAR Embedded Workbench for Phyworks' Firmware
摘要 :The Phyworks reference design firmware for the PHY1070/PHY1071/PHY1075/PHY1076 and the PHY2078 optical transceivers is compiled using the IAR Embedded Workbench® development environment for AVR® microcontrollers. This application note describes a procedure for setting up the workbench, focusing on the Atmel® ATmega88. The article details specific instructions relating to the processor and memory used.
This document is written for a highly specific application and contains information about proprietary technology, and is only available to customers whose requirements closely match the application. To request the full document, please complete the form below.
Please enter information in English only.