Maxim > 设计支持 > 技术文档 > 设计指南

设计指南

 应用笔记   设计指南   工程期刊   

请点击目录分类浏览。

数字电位器

  • 模数与数模转换
  • 放大器控制
  • 模拟滤波器
  • 音频
  • 显示器控制―LCD、CCFL、TFT
  • 光纤监视与控制
  •  
  • 通用产品
  • 工业与楼宇控制
  • 使用仪表
  • 电源裕量与校准

  • View   In New Window   设计指南 5279 
    IC故障诊断及失效分析:发现事实避免臆测
    View   In New Window PDF
    83kB
    设计指南 5275 
    Calibration - Needless or a Necessity?
    View   In New Window PDF
    111.4kB
    设计指南 4645 
    A Power Engineer: the Super Hero in a Design?
    View   In New Window PDF
    67.3kB
    设计指南 5067 
    Margining and Calibration for Fun and Profit
    View   In New Window PDF
    137.3kB
    设计指南 5066 
    When Is Calibration Important?
    View   In New Window PDF
    96.2kB
    设计指南 5274 
    It's Hot! Why Are My CMOS Logic Circuits Burning Up?
    View   In New Window   设计指南 5036 
    校准电路
    View   In New Window PDF
    110.9kB
    设计指南 5065 
    Radio Susceptibility - Cure with Antibiotic, Vaccine, or the Laws of Physics?
    View   In New Window PDF
    86kB
    设计指南 4606 
    Self-Starting Can Be Hard to Do - Understanding Power-on-Reset Requirements in Regulators and Bandgaps
    View   In New Window PDF
    72kB
    设计指南 5061 
    Effective Number of Bits Calculator Tutorial
    View   In New Window   设计指南 4704 
    工业设备设计中的电子校准和生产误差修正方法
    View   In New Window PDF
    95.3kB
    设计指南 4703 
    Introduction to Electronic Calibration and Methods for Correcting Manufacturing Tolerances in Medical Equipment Designs
    View   In New Window PDF
    189.9kB
    设计指南 4602 
    Adjusting and Calibrating Out Offset and Gain Error in a Precision DAC
    View   In New Window PDF
    137kB
    设计指南 4429 
    Murphy's Law and the Risks of Designing "Off Data Sheet"
    View   In New Window PDF
    37kB
    设计指南 4346 
    Pots, Pans, Logs, and Linear Digital Pots Create Arbitrary Voltage Curves
    View   In New Window   设计指南 3081 
    怎样将数字电位器的带宽从10倍提高到100倍
    View   In New Window PDF
    44kB
    设计指南 4288 
    How to Calculate the Wiper Voltage of a Digital Potentiometer
    View   In New Window   设计指南 4221 
    利用DS1841对数电阻优化雪崩光电二极管(APD)的偏置范围
    View   In New Window   设计指南 4075 
    如何将DS1864的电流DAC转换成电压DAC
    View   In New Window   设计指南 4025 
    DAC与数字电位器:在我的应用中选择哪种合适?
    View   In New Window   设计指南 3230 
    如何使用PC并口与2线设备通信
    View   In New Window PDF
    112.5kB
    设计指南 864 
    EPOT Applications: Gain Adjustment in Op-Amp Circuits

    模数与数模转换

    View   In New Window   设计指南 5279 
    IC故障诊断及失效分析:发现事实避免臆测
    View   In New Window PDF
    67.3kB
    设计指南 5067 
    Margining and Calibration for Fun and Profit
    View   In New Window PDF
    110.9kB
    设计指南 5065 
    Radio Susceptibility - Cure with Antibiotic, Vaccine, or the Laws of Physics?
    View   In New Window PDF
    91kB
    设计指南 5059 
    Thermal Noise Calculator Tutorial
    View   In New Window PDF
    104kB
    设计指南 5063 
    Statistical Process Control Calculator Tutorial
    View   In New Window PDF
    82kB
    设计指南 5060 
    ADC/DAC Accuracy Calculator Tutorial
    View   In New Window PDF
    72kB
    设计指南 5061 
    Effective Number of Bits Calculator Tutorial
    View   In New Window PDF
    66kB
    设计指南 5062 
    Bandgap Reference Calculator Tutorial
    View   In New Window   设计指南 4348 
    降低精密放大器的电压失调
    View   In New Window PDF
    189.9kB
    设计指南 4602 
    Adjusting and Calibrating Out Offset and Gain Error in a Precision DAC
    View   In New Window   设计指南 3417 
    用数字电位器替代机械电位器
    View   In New Window   设计指南 4075 
    如何将DS1864的电流DAC转换成电压DAC

    放大器控制

    View   In New Window   设计指南 5279 
    IC故障诊断及失效分析:发现事实避免臆测
    View   In New Window   设计指南 4348 
    降低精密放大器的电压失调
    View   In New Window   设计指南 3417 
    用数字电位器替代机械电位器
    View   In New Window PDF
    112.5kB
    设计指南 864 
    EPOT Applications: Gain Adjustment in Op-Amp Circuits

    模拟滤波器

    View   In New Window   设计指南 5279 
    IC故障诊断及失效分析:发现事实避免臆测
    View   In New Window PDF
    110.9kB
    设计指南 5065 
    Radio Susceptibility - Cure with Antibiotic, Vaccine, or the Laws of Physics?

    音频

    View   In New Window   设计指南 3417 
    用数字电位器替代机械电位器
    View   In New Window PDF
    119kB
    设计指南 1828 
    Audio Gain Control Using Digital Potentiometers

    显示器控制―LCD、CCFL、TFT

    View   In New Window   设计指南 3417 
    用数字电位器替代机械电位器

    光纤监视与控制

    View   In New Window PDF
    67.3kB
    设计指南 5067 
    Margining and Calibration for Fun and Profit
    View   In New Window   设计指南 3417 
    用数字电位器替代机械电位器
    View   In New Window   设计指南 4221 
    利用DS1841对数电阻优化雪崩光电二极管(APD)的偏置范围

    通用产品

    View   In New Window   设计指南 5279 
    IC故障诊断及失效分析:发现事实避免臆测
    View   In New Window PDF
    83kB
    设计指南 5275 
    Calibration - Needless or a Necessity?
    View   In New Window PDF
    137.3kB
    设计指南 5066 
    When Is Calibration Important?
    View   In New Window PDF
    110.9kB
    设计指南 5065 
    Radio Susceptibility - Cure with Antibiotic, Vaccine, or the Laws of Physics?
    View   In New Window PDF
    84kB
    设计指南 838 
    Use a Linear Potentiometer to Create a Nonlinear Transfer Function for Audio Volume Control
    View   In New Window PDF
    189.9kB
    设计指南 4602 
    Adjusting and Calibrating Out Offset and Gain Error in a Precision DAC
    View   In New Window   设计指南 3417 
    用数字电位器替代机械电位器
    View   In New Window   设计指南 3081 
    怎样将数字电位器的带宽从10倍提高到100倍

    工业与楼宇控制

    View   In New Window   设计指南 4704 
    工业设备设计中的电子校准和生产误差修正方法
    View   In New Window PDF
    95.3kB
    设计指南 4703 
    Introduction to Electronic Calibration and Methods for Correcting Manufacturing Tolerances in Medical Equipment Designs
    View   In New Window PDF
    189.9kB
    设计指南 4602 
    Adjusting and Calibrating Out Offset and Gain Error in a Precision DAC
    View   In New Window   设计指南 3417 
    用数字电位器替代机械电位器

    使用仪表

    View   In New Window PDF
    110.9kB
    设计指南 5065 
    Radio Susceptibility - Cure with Antibiotic, Vaccine, or the Laws of Physics?
    View   In New Window   设计指南 4704 
    工业设备设计中的电子校准和生产误差修正方法
    View   In New Window PDF
    95.3kB
    设计指南 4703 
    Introduction to Electronic Calibration and Methods for Correcting Manufacturing Tolerances in Medical Equipment Designs
    View   In New Window   设计指南 4348 
    降低精密放大器的电压失调
    View   In New Window PDF
    189.9kB
    设计指南 4602 
    Adjusting and Calibrating Out Offset and Gain Error in a Precision DAC
    View   In New Window   设计指南 3417 
    用数字电位器替代机械电位器

    电源裕量与校准

    View   In New Window PDF
    111.4kB
    设计指南 4645 
    A Power Engineer: the Super Hero in a Design?
    View   In New Window PDF
    67.3kB
    设计指南 5067 
    Margining and Calibration for Fun and Profit
    View   In New Window   设计指南 4704 
    工业设备设计中的电子校准和生产误差修正方法
    View   In New Window PDF
    95.3kB
    设计指南 4703 
    Introduction to Electronic Calibration and Methods for Correcting Manufacturing Tolerances in Medical Equipment Designs
    View   In New Window   设计指南 3417 
    用数字电位器替代机械电位器
    View   In New Window   设计指南 4221 
    利用DS1841对数电阻优化雪崩光电二极管(APD)的偏置范围
    View   In New Window PDF
    117kB
    设计指南 818 
    Digital Adjustment of DC-DC Converter Output Voltage in Portable Applications