系统板 MAXREFDES1054

MAXREFDES1054:非隔离、单路输出、同步Buck、降压型DC-DC转换器


 Download Reference Design Note



Input Type VIN (MIN)
(V)
VIN (MAX)
(V)
IOUT
(A)
Single/Multiple
Output
VOUT
(V)
POUT
(W)
Topology
DC 10 55 5 Single 4 20 Synchronous Buck

The MAX17506 high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated high-side MOSFET operates over a 4.5V to 60V input. The converter can deliver up to 5A and generates output voltages from 0.9V up to 0.9 x VIN. The feedback (FB) voltage is accurate to within ±1.4% over -40°C to +125°C. The MAX17506 uses peak current-mode control and can be operated in the pulse-width modulation (PWM), pulse-frequency modulation (PFM), and discontinuous conduction mode (DCM) control schemes..

Key Features

  • Wide 4.5V to 60V Input
  • Adjustable 0.9V to 0.9 x VIN Output
  • 100kHz to 2.2MHz Adjustable Switching Frequency with External Synchronization
  • 100kHz to 2.2MHz Adjustable Switching Frequency
  • Up to 5A Output Current
  • Fully Assembled and Tested
  • Proven PCB Layout
MAXREFDES1054 Board 放大+


This board is not available for purchase.

Designed, Built, Tested

This document describes the hardware shown in Figure 1. It provides a detailed systematic technical guide for the design of buck converter using the MAX17506 for low voltage and smaller size. Refer to the MAX17506 IC data sheet and MAX17506A EV kit data sheet for device operation details. The converter design has been built and tested, details of which follow later in this document.

Design Resources

 
Status:
Package:
Temperature:

MAX17506
4.5V–60V、5A、高效同步降压型DC-DC转换器,带内部补偿

  • 减少外部元件,降低总体成本
  • 减少DC/DC稳压器料号清单
  • 降低功耗